Fast delivery for AISI304| SUS304| EN1.4948 Factory from Salt Lake City

Fast delivery for
 AISI304| SUS304| EN1.4948 Factory from Salt Lake City

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    abide by the contract", conforms to the market requirement, joins in the market competition by its high quality as well as provides more comprehensive and excellent service for clients to let them become big winner. The pursue of the company, is the clients' satisfaction for Fast delivery for AISI304| SUS304| EN1.4948 Factory from Salt Lake City, We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • http://www.DKCKnives.com
    paul@dkcknives.com

    Damascus Folding Knife Damascus Hunting Knife Damascus Bowie Knife Best Survival Knife Groomsmen Gifts Tanto Hunting Knife Tactical Knife

    Knives Come With A Sheath Custom High Quality Double Layers of Hard Genuine Leather. The leather is water proof and has double layers inside. The leather we used to make sheath is Camel, Goat and Buffalo. The leather has been treated with extra process to get the natural looks of snake, alligator, leopard, skins etc, and we tried to matches each sheath cover with the knife handle. Extra work is done on the leather sheath cover to make it colorful, unique and beautiful.
    Collectors Knife Feels Great In Your Hand and Pocket ! Great For Personal Use, Or A Fine Gift DKC KNIVES TM..The Collection You Will Be Proud Of
    Over 320 Layers, 15N20 & 1095 Damascus Mixture of steel and high, low Carbon and HRC approximately 50 to 60. The knife blade is 100% hand forged and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Heat Treatment: Excellent heat treatment to blade/ oil quenched. Our craftsman use heat treatment and oil quenching to create a perfect blade. The billet of the blade is forged, welded and hand hammered several times and dipped in the motel salt to get the unique patterns.
    To make a custom hand made knife is a skillful art that requires hard work and careful attention. This marvelous knife is very impressive due to its excellent design & detail. We take great pride when designing our knives. The knife is well balanced and has an excellent grip, creating a natural weight and feel when held. Our craftsman put extra work in each knife by carefully designing, carving and hand making it into a breathtaking work of art. There may be slight variations in finish, colors, etc. because they are hand made and variations in natural materials. You are purchasing a knife that will give you many years of great service as well as provide a family heirloom that you can hand down to family members. Please see our full line of knives…we have a fast growing base of knife collectors that eagerly wait for new knife releases. Buy two or three different model DKC KnivesTM and you will see. Our knives are value priced and compare to other custom knives costing two to five times the amount we sell our knives for. Since knives are one of those areas where its possible for fake copies to be made, please be sure to purchase only from SAN FRANCISCO SUPPLY the only authorized factory reseller of DKC Knives. In addition, starting January 1, 2015 most of our knives will have a DKCTM engraving. Look for factory information in your box about knife care. Knives are well boxed, and typically arrive wrapped in plastic with a good coat of oil to protect the knife. When you receive your knife, take a soft cloth and clean off the knife..but as with all steel knives..keep it well oiled to preserve function, look, and beauty. Knives are for responsible adults only. You must be 18 Years or older to purchase this knife. While all our knives are field quality, we do not support or advocate the use of knives for any type of violent activity. We look forward to having you as a long term customer and thanks for purchasing a fine quality knife. THANKS FROM DKC KNIVES !



    Chirp is collecting items that are square, so Quack starts off a assortment of items with “pointy-tops.” (Oddly, if you convert them a little bit, they search just like Chirp’s squares!)

    For interactive video games for young ones, activities for mother and father to do with their young ones, and means for preschool educators, take a look at the PEEP World wide web internet site at http://www.peepandthebigwideworld.org.

    And stick to us on Fb at www.facebook.com/pages/officialpeepandthebigwideworld for all the most current information about Peep and the Big Broad Earth.

    PEEP also has videos in Spanish: take a look at our Spanish Youtube channel at http://www.youtube.com/consumer/peepenespanol

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup