Factory wholesale price for EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Supply to Cannes

Factory wholesale price for
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Supply to Cannes

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Factory wholesale price for EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Supply to Cannes, We, with great passion and faithfulness, are willing to provide you with perfect services and striding forward with you to create a bright future.


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • Alu-Forr Kft.

    English:

    Solder/Braze rod for aluminum and alum-alloys.

    Many thanks to a new, exceptional know-how it isn’t essential to prepare the area by brushing or polishing! Alu-Forr solder is wholly capable to dissociate the aluminum oxide layer at operating temperature (!) ensuing a clean up and oxide absolutely free soldering.
    How to lay the solder product on the area:
    Applying a propane gasoline torch, or in the case of AL-three hundred /blue packaging/ employing the correct dimension of electric soldering iron, warmth the item to be soldered up to operating temperature, which can be checked by touching it with the rod. Soon after laying the soldering product on the area it really should be unfold evenly with a compact wire brush or steel rod. If we would like to solder two separated portion collectively it is suggested to go over both equally surfaces with the soldering product in advance.
    AL-three hundred soldering product is softer, more flowing, consequently it is completely acceptable repairing/soldering air-circumstances, refrigerators, electric wiring, and many others. The AL-400 soldering substance (pink packaging) is specially built for the destinations that require wonderful mechanical solidity, and for the circumstances of regular soldering works, i.e. mechanical parts, machines which operate underneath larger temperature circumstances.

    AL-three hundred operating temperature: three hundred degrees Celsius /572 F/
    AL-400 operating temperature: 400 degrees Celsius /752F/

    Proportions: 230 mm X three.two mm

    Be sure to, inform the vendor about the wanted and picked sort of goods precisely by email, providing your nickname as perfectly.

    AL-three hundred is very suggested for soldering Zamac!

    Unique kind of packs are offered:
    12 – 24 – fifty five – one hundred ten parts

    Magyar:
    Alumínium és ötvözetei forrasztására alkalmas pálca.

    Egy új, egyedi technológiának köszönhetően a felület, csiszolással való előkezelése nem szükséges! Az Alu-Forr anyaga képes az alumíniumoxid megbontására a munkahőmérsékleten,(!) így tiszta oxidmentes forrasztást tesz lehetővé. A forrasztóanyag felhordása a felületre: Gázlángmelegítő segítségével hevítjük a forrasztani kívánt munkadarabot a munkahőmérséklet eléréséig, amit a pálca, munkadarabhoz való hozzáérintésével ellenőrizhetünk, illetve az AL-three hundred-as jelölésű (kék csomagolás) anyag esetében a munkadarab méretének megfelelő elektromos forrasztópáka(min. a hundred-300W) segítségével végezhetünk el. A felhordott forrasztóanyagot egy kisméretű drótkefe, vagy egy acélpálca segítségével szétterítjük. Két összeforrasztandó anyag esetén, ezt mindkét felületen érdemes előre elvégezni.

    A “munkahőmérséklet” a munkadarab felszíni hőmérséklete a forrasztás helyén!!!

    Tehát ezt kell elérni az elektromos páka használatánál is!

    Az AL- three hundred-as forrasztóanyag lágyabb, folyékonyabb ezért kiválóan alkalmas klímák, hűtők, elektromos vezetékek stb. javításához/forrasztásához. Az AL- 400-as jelölésű forrasztóanyag (piros csomagolás) kifejezetten nagy mechanikai szilárdságot követelő helyeken, illetve általános forrasztási munkák, mint pl. gépek, alkatrészek, magasabb hőmérsékleti viszonyoknak kitett munkadaraboknál alkalmazható előnyösen.
    AL-three hundred munkahőmérséklet: three hundred Celsius fok.
    AL-400 munkahőmérséklet: 400 Celsius fok.

    SPIÁTER forrasztásához az AL-three hundred kifejezetten ajánlott!

    Méret: 230mm X three.2mm



    We really don’t recommend cutting dry bamboo because it’s very hard and will damage the blade. We’ve done this before without damaging the blade, but we weren’t able to record it on video. We decided to do it again (so you don’t have to) to show what our swords are capable of.

    These bamboos have been dry for 5 years already. They’re not just dry—they’re BONE-DRY.

    Read more here: http://www.geishasblade.com/blog/bone-dry-bamboo-tameshigiri/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car