Factory supplied Metal Forms Factory for Naples
Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker) Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg Discs, pu...
It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for Factory supplied Metal Forms Factory for Naples, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.
Steel products can also be divided by their shapes. We can produce in the following shapes:
|Length||up to 16,000 mm|
|Round||from 80 to 1,200 mm Ø|
|Square||from 140 mm to 460 mm|
|Flat||from 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
|Barrel/flange diameter||up to 1.600 mm Ø|
|Length||up to 15.000 mm|
|Weight||from 10 kg to 35.000 kg|
Discs, punched discs, hubs
|Diameter||up to 1.200 mm
(smaller dias correspondingly thicker)
|Thickness||up to 600 mm|
Blocks, plates (forged three-dimensionally)
|Length||max. 6.000 mm|
|Width||max. 1.800 mm|
|Thickness||max. 1.000 mm
(in case of smaller thickness greater length and width)
|Weight||max. 30.000 kg|
Forged tubes, cylinders and other hollow forgings
|Inner diameter||160 mm to 600 mm|
|Length||up to 1,200 mm|
|Weight||up to 10.000 kg|
|Outer diameter||up to 2.400 mm|
|Height||up to 2.200 mm|
|Weight||up to 25.000 kg|
Seamless rolled rings
|Outer diameter||up to 3.500 mm|
|Height||up to 800 mm|
|Weight||10 kg to 8.000 kg|
We can also produce according to clients' designs. If you have your own design, just feel free to contact us.
CITIC Metal is a conglomerate of two fully built-in steel mills in China, Xingcheng and Daye, making high top quality distinctive steel bars, forgings and plates.
Drilling a Piece of hardened 1/4″ Spring steel, comparing the average Titanium Drill Bit VS our Terminator Carbide drill bit. This video will speak for itself.
Check out www.DRILLBITWAREHOUSE.com or give us a call at (800) 350-8665 (TOOL) for more info!