Factory selling AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory in Lisbon
AISI 4340 steel is a medium carbon, low alloy steel known for its toughness andstrength in relatively large sections. AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has goodshock and impact resistance as well as wear and abrasion resistanc...
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Factory selling AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory in Lisbon, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
is a medium carbon, low alloy steel known for its toughness and
strength in relatively large sections. AISI 4340 is also one kind of
nickel chromium molybdenum steels. 4340 alloy steel is generally
supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
Pre hardened and tempered 4340 steels can be further surface hardened by
flame or induction hardening and by nitriding. The 4340 steel has good
shock and impact resistance as well as wear and abrasion resistance in
the hardened condition. AISI 4340 steel properties offer good ductility
in the annealed condition, allowing it to be bent or formed. Fusion and
resistance welding is also possible with our 4340 alloy steel. ASTM 4340
material is often utilized where other alloy steels do not have the
hardenability to give the strength required. For highly stressed parts
it is excellent choice. AISI 4340 alloy steel can also be machined by
all customary methods.
Due to availability the ASTM 4340 grade steel is often substituted
with European based standards 817M40/EN24 and 1.6511/36CrNiMo4 or Japan
based SNCM439 steel. You have the detailed data of 4340 steel below.
1. AISI 4340 Steel Specification and Relevant Standards
|Standard||EN 10250||JIS G4103|
2. ASTM 4340 Steels And Equilvalents Chemical Composition
|JIS G4103||SNCM 439/SNCM8||0.36-0.43||0.60-0.90||0.030||0.030||0.15-0.35||1.60-2.00||0.60-1.00||0.15-0.30|
3. AISI Alloy 4140 Steel Mechanical Properties
(Heat Treated Condition )
|Tensile Strength MPa||Yield Strength
|Thermal expansion co-efficient (20°C/68°F, specimen oil hardened, 600°C (1110°F) temper||12.3 µm/m°C||6.83 µin/in°F|
|Thermal conductivity (typical steel)||44.5 W/mK||309 BTU in/hr.ft².°F|
4. Forging of 4340 Alloy Steel
the steel 4340 first, heat up to 1150°C – 1200°C maximum for forging,
hold until temperature is uniform throughout the section.
Do not forge
below 850 °C. 4340 has good forging characteristics but care must be
taken when cooling as the steel shows susceptibility to cracking.
Following forging operation the work piece should be cooled as slowly as
possible. And cooling in in sand or dry lime is recommended etc.
5. AISI 4340 Steel Grade Heat Treatment
pre-hardened steel stress relieving is achieved by heating steel 4340
to between 500 to 550°C. Heat to 600 °C – 650 °C, hold until temperature
is uniform throughout the section, soak for 1 hour per 25 mm section,
and cool in still air.
full anneal may be done at 844°C (1550 F) followed by controlled
(furnace) cooling at a rate not faster than 10°C (50 F) per hour down to
315°C (600 F). From 315°C 600 F it may be air cooled.
4340 alloy steel should be in the heat treated or normalized and heat
treated condition before tempering. The tempering temperature for
depends upon the strength level desired. For strength levels in the 260 –
280 ksi range temper at 232°C (450 F). For strength in the 125 – 200
ksi range temper at 510°C (950 F). And don’t temper the 4340 steels if
it is in the 220 – 260 ksi strength range as tempering can result in
degradation of impact resistance for this level of strength.
Tempering should be avoided if possible within the range 250 °C – 450 °C due to temper brittleness.
Flame or Induction Hardening
As mentioned above, pre-hardened and tempered 4340 steel bars or plates can be further surface hardened by either the flame or induction hardening
methods resulting in a case hardness in excess of Rc 50. AISI 4340
steel parts should be heated as quickly as possible to the austenitic
temperature range (830 °C – 860 °C) and required case depth followed by
an immediate oil or water quenching, depending upon hardness required,
workpiece size/shape and quenching arrangements.
quenching to hand warm, tempering at 150°C – 200°C will reduce stresses
in the case with minimal effect on its hardness.
All de-carburised surface material must first be removed to ensure best results.
and tempered 4340 alloy steel can also be nitrided, giving a surface
hardness of up to Rc 60. Heat to 500°C – 530°C and hold for sufficient
time (from 10 to 60 hours) to develop the depth of case. Nitriding
should be followed by slow cooling (no quench) reducing the problem of
distortion. The nitrided grade 4340 materials can therefore be machined
to near final size, leaving a small grinding allowance only. The tensile
strength of the 4340 steel material core is usually not affected since
the nitriding temperature range is generally below the original
tempering temperature employed.
Surface hardness achievable is 600 to 650HV.
is best done with the alloy steel 4340 in the annealed or normalized
and tempered condition. It can be readily machined by all conventional
methods such as sawing, turning, drilling etc. However in the high
strength conditions of 200 ksi or greater the machinability is only from
25% to 10% that of the alloy in the annealed condition.
of steel 4340 in the hardened and tempered condition (as normally
supplied), is not recommended and should be avoided if at all possible,
because of the danger of quench cracking, as the mechanical properties
will be altered within the weld heat affected zone.
must be carried out, pre-heat to 200 to 300°C and maintain this while
welding. Immediately after welding stress relieve at 550 to 650°C, prior
to hardening and tempering.
If welding in the hardened and
tempered condition is really necessary, then the work piece, immediately
on cooling to hand warm, should be if possible stress relieved at 15 °C
below the original tempering temperature.
8. Application of 4340 Steel
4340 steel is used in most industry sectors for applications requiring
higher tensile/yield strength than 4140 steel can provide.
Some typical applications such as:
Aircraft Landing Gear
Oil and Gas Drilling,
Warm and Cold Forming,
Transfer Systems, like power transmission gears and shafts.
engineering industries and structural use applications, such as: heavy
duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.
Size : 2″ – 24″
* Carbon Steel, Alloy Steel, Stainless Steel
* Hastalloy, Monel, Duplex Steel on request
Pressure Class : #150 -#2500 (Two Piece & Three Piece)
Applications : Steam, Gases, Liquids, Oil etc
Certification details : IBR Form III-C, API 6D
* Double block and bleed
* Rugged cross country pipeline ball valves
* Meeting International standards for fugitive emission levels
* Licensed API 6D manufacturer
Best Garage Door Repair Companies Bowling Green Florida FL %key phrase% Best Bowling Green Florida FL.
If your garage door has actually started to malfunction, you may be thinking about installing a brand-new or upgraded door. Feel confident it is a clever investment. As a matter of fact, installing a brand-new garage door returns regarding 84 percent in resale value, according to Remodeling Magazine. Along with bringing you a strong return on your investment, a brand-new garage door will enhance functionality, improve the appearance of your house’s exterior, and also make sure the protection of both your house’s entryway and also the contents of your garage. Since installing a garage door is an extensive work that involves some electric work, hefty lifting and also elimination of the old garage door, it will likely require working with a garage door specialist. Here are some variables to think about as you want to purchase a brand-new garage door:.
Just what is the Price of the Garage Door Itself?
Installation Prices and also Factors to consider.
Garage Door Substitute Cost Variables.
Kinds of Garage Doors.
Just how much Does a Garage Door Opener Cost?
Just how much Does a New Garage Door Cost?
A garage door will cost anywhere from $200 for solitary doors to $4,000 for 2 or even more doors, with far better products making up the greater cost. Many home owners report investing regarding $1,063 for the door and also installment. The total price should include the purchase of new tracks for the door to relocate along, in addition to connected adhesives, adapters and also fasteners. It is possible to save some cash promptly and also labor by installing the door on your own; however, the large weight of some doors could pose a high risk of personal injury. If you believe you would love to try installment on your own, make sure to talk to your garage door store and also select a door that could be maneuvered safely.
Insulation, which enhances energy performance and also could assist to lower energy costs, is vital when a garage door is attached to the house. In this case, doors with high R-values are favored. This suggests it has insulation that could maintain the heat in. The greater the R-value, the far better protected your garage will be against outdoors noise and also cool and also warm air. Well-insulated doors will have polystyrene or polyurethane foam in their construction. Some other variables to remember when purchasing a garage door include:.
Squeeze Resistance: Pinch resistance pushes fingers off the beaten track if they’re too near to a door.
Meddle Resistance: Bottom brackets minimize injury risk from door parts.
Garage Door Installation Cost Variables.
Mounting a garage door involves:.
Electric electrical wiring.
Appropriate elimination and also disposal of the old garage door.
Heavy and also unpleasant installment as a Do It Yourself task.
So it is always best to have a brand-new garage door mounted by a professional. Ensure that any service provider quotes include the cost of removing your old garage door and also installing the new tracks and also additional parts listed above. The style and also product of the garage door you select, in addition to whether you want to have a garage door opener mounted, will also influence the cost of your last task. Typically, it will cost much less to set up a steel garage door without an opener than to set up a custom-made timber door with a garage door opener. Current advancements have actually also generated state-of-the-art doors with thick insulation and also energy-efficient glaze, in addition to finished interior surfaces and also various other considerable upgrades. These are a lot more costly doors, however they are also extremely resilient.
% key phrase% %key phrase% Garage Door Substitute Considerations.
Changing a garage door usually averages around the same price as installing a brand-new garage door. Property owners may pay anywhere in between $500 and also $2,500 depending on a wide array of variables including:.
Products: You’ll select a brand-new door from a wide array of products, designs, shapes and sizes, which differs widely in price.
Handiwork: You might replace your garage door as a Do It Yourself task, however this might bring about considerable fixings and also maintenance down the road if done inaccurately. So best to hire a professional.
Place: Where you live and also how your house is created will establish the sort of door you need and also how much the specialist quotes.
The additional expenses may include getting rid of and also dealing with the old door and also hardware, so make sure to ask what’s consisted of in their quote. Otherwise you might be looking an additional 20 percent for that part of labor. There may also be additional charges for work like:.
Resizing the opening.
Reframing the exterior.
It’s necessary to have a professional inspect the garage ahead of time t