Factory Promotional Metal Forms Factory for Russia

Factory Promotional
 Metal Forms Factory for Russia

Short Description:

Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker)             Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg             Discs, pu...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for Factory Promotional Metal Forms Factory for Russia, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.


    Steel products can also be divided by their shapes. We can produce in the following shapes:

    Forged bars

    Length up to 16,000 mm
    Round from 80 to 1,200 mm Ø
    Square from 140 mm to 460 mm
    Flat from 30 x 25 mm to 2.000 x 600 mm
    (in case of a smaller width correspondingly thicker)

    [Translate to English:] Geschmiedete Stäbe
               

    Shafts

    Barrel/flange diameter up to 1.600 mm Ø
    Length up to 15.000 mm
    Weight from 10 kg to 35.000 kg

    [Translate to English:] Wellen
               

    Discs, punched discs, hubs

    Diameter up to 1.200 mm
    (smaller dias correspondingly thicker)
    Thickness up to 600 mm

     

     

    [Translate to English:] Scheiben, Lochscheiben, Nabenscheiben
               

    Blocks, plates (forged three-dimensionally)

    Length max. 6.000 mm
    Width max. 1.800 mm
    Thickness max. 1.000 mm
    (in case of smaller thickness greater length and width)
    Weight max. 30.000 kg

     

     

    [Translate to English:] Blöcke, Platten
               

    Forged tubes, cylinders and other hollow forgings

    Inner diameter 160 mm to 600 mm
    Length up to 1,200 mm
    Weight up to 10.000 kg

     

     

    [Translate to English:] Geschmiedete Hohlstäbe, Zylinder
               

    Forged rings

    Outer diameter up to 2.400 mm
    Height up to 2.200 mm
    Weight up to 25.000 kg

    [Translate to English:] Geschmiedete Ringe
               

    Seamless rolled rings

    Outer diameter up to 3.500 mm
    Height up to 800 mm
    Weight 10 kg to 8.000 kg

    [Translate to English:] Nahtlos gewalzte Ringe
              

    We can also produce according to clients' designs. If you have your own design, just feel free to contact us.

  • Previous:
  • Next:



  • Before purchasing this cnc I had read and listened to some machinist jibber jabber about cat40 this, bridgeport that. The way some machinist make it sound is that if you are buying an old used machine it has to have a big spindle to remove alot of metal. In the cnc forums this machine is talked about like a light duty machine that can only drill and tap little holes in aluminum. The fact is this Brother mill is a full machining center with a fantastically productive control, and it will remove way more steel in a way shorter time than an old bridgeport and it will do it more accurately. Plus it has the bonus of RIGID TAPPING INCLUDING DEEP HOLE PECK DRILLING AND TAPPING CYLCES!!! I always wondered how deep of a cut a little bt-30 machine could take. Now I know. This 20 year old Brother TC225 can cut .250 deep by 1.5 wide with a Kyocera Ultra Hurricane 2.5″ 6 insert cutter at 600sfm(1000% speed overdrive) and .004″ feed per tooth, .024″ per revolution (400% feed overdrive) IN MEDIUM CARBON STEEL(around 7 cubic inches per minute which is at least double maybe as much as four times the factory steel removal rating for the mill with a 1990s vintage face mill)!!! It can do this with only five horsepower because of both the high rigidity of the machine, the extreme shear angle of the perfectly square shoulder and bottom milling inserts of the Kyocera facemill, and of course proper cnc setup is a must. You can confirm this with the video, the first cut travels approximately five inches in fifteen seconds at .250 deep which can be verified by measuring the depth and comparing it to a known size like the 2.5″ facemill or the 100mm wide toolmakers vise.

    By the way, you are seeing it with the XYZ rapids set to a max of 400 inches per minute(I set it to this because any faster and the machine is moving way to fast for me to hit the E-stop if it is about to crash, plus it scares me when it moves faster) however the machine has a max of 780ipm XY, 590ipm Z.
    This 20 YEAR OLD machine has 2000 line optical differential encoders and AC servoes directly mounted to super high accuracy zero backlash ballscrews all riding on high rigidity zero lash hsr profile linear rails. I have the original calibration numbers for all axis and ballscrews and the numbers are unreal. All open source components that could be purchased from various manufacturers. However since the service and prices are so good from Yamazen, I prefer to buy from them directly.



    Solve your corrosion problems and prevent premature part failure with electropolishing from Able Electropolishing. http://www.ableelectropolishing.com/benefits-of-electropolishing/corrosion-resistance/

    Electropolishing is an effective process that enhances corrosion resistance on a variety of alloys, particularly metals that may not be suitable for passivation. Metals like stainless steel, cooper, aluminum, carbon steels, brass, and more benefit from this process, which removes embedded iron, contaminants, heat tints, oxide scale, and other materials that aren’t removed during the passivation process. Recommended for parts that need to withstand high humidity or corrosive environments, electropolishing removes the surface skin without changing the size or dimensions of a part, making it ideal for parts that must be very specific sizes.

    Learn more about electropolishing today and request a trial at http://www.ableelectropolishing.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car