Factory Price For Wholesale price stable quality C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Mexico City Wholesale to Madrid

Short Description:

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suita...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Factory Price For Wholesale price stable quality C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Mexico City Wholesale to Madrid, We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.


    Steel C45 Round Bar is
    an unalloyed medium carbon steel, which is also a general carbon
    engineering steel. C45 is a medium strength steel with good
    machinability and excellent tensile properties. C45 round steel is
    generally supplied in the black hot rolled or occasionally in the
    normalised condition, with a typical tensile strength range 570 – 700
    Mpa and Brinell hardness range 170 – 210 in either condition. It does
    not however respond satisfactorily to nitriding due to a lack of
    suitable alloying elements.

    C45 round bar steel is equivalent to EN8 or 080M40.
    Steel C45 bar or plate is suitable for the manufacture of parts such as
    gears, bolts, general-purpose axles and shafts, keys and studs.

    1. Supply Range of Steel C45 Round Bar

    • C45 Steel Round Bar: diameter 8mm – 3000mm

    • C45 Steel Plate: thickness 10mm – 1500mm  x width 200mm – 3000mm

    • C45 Steel Flat Bar: 200mm – 1000mm

    • Square C45 Steel: 20mm-800mm

    • Hexagon Steel.

    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. Common C45 Steel Specifications

    Country USA British Japan Australia
    Standard ASTM A29 EN 10083-2 JIS G4051 AS 1442
    Grades 1045 C45/1.1191 S45C 1045

    3. C45 Round Bar Steel Chemical Composition Properties

    Standard Grade C Mn P S Si Ni Cr
    ASTM A29 1045 0.43-0.50 0.60-0.90 0.04 0.050  -  -  -
    EN 10083-2 C45/1.1191 0.42-0.50 0.50-0.90 0.03 0.035 0.04 0.4 0.4
    JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35  -  -

    4. Mechanical Properties of C45 Round Bar Steel Material

    • Mechanical Properties in Quenched+Tempered Condition

    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5 (%) Reduction Z (%)
    <16 <8 min. 490 700-850 min. 14 min. 35
    <17-40 <8<=20 min. 430 650-800 min. 16 min. 40
    <41-100 <20<=60 min. 370 630-780 min. 17 min. 45
    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5(%)
    <16 <16 min. 390 min. 620 min. 14
    <17-100 <16<=100 min. 305 min. 305 min. 16
    <101-250 <100<250 min. 275 min. 560 min. 16

    5. Forging of Carbon Steel C45 Round Bar

    Hot forming temperature: 850-1200oC.

    Pre
    heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC
    maximum, hold until temperature is uniform throughout the section and
    commence forging immediately. Forging is not workable below 850 oC.
    Finished forgings could be air cooled.

    We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.

    6. DIN C45 Round Bar Steel Grade Heat Treatment

    Forging or hot rolling: 1100 – 850°C
    Normalising:  840 – 880°C/air
    Soft annealing:  680 – 710°C/furnace
    Hardening:  820 – 860°C/water, oil
    Tempering:  550 – 660°C/air

    7. Hardening of DIN C45 Steel Hardening

    Harden from a temperature of 820-860oC followed by water or oil quenching.

    Heat
    to 820 oC – 850 oC hold until temperature is uniform throughout the
    section, soak for 10 – 15 minutes per 25mm of section, and quench in
    water or brine. Or,

    Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.

    Surface hardness for C45 special steel round bar after flame or induction hardning:

    • Steel Name       Steel number          Surface Harndess

    • C45                        1.1191                        min. 55 HRC

    8. Application of DIN Carbon Steel C45 Round Bar

    DIN
    C45 round bar steel material and steel plate C45, flats are widely used
    in all industry for uses which require more strength and wear
    resistance than the low carbon mild steel.

    Quenched and
    subsequently tempered steel for C45 steel grade round bar, steel plate,
    flat and square is used for axles, bolts, forged connecting rods,
    crankshafts, torsion bars, light gears, guide rods, screws, forgings,
    wheel tyres, shafts, sickles, axes, knives, wood working drills,
    hammers, etc.

    Welcome customers to inquiry DIN C45 round bar,
    CK45/1.1191 steel plate, flat steel for C45 steel price. We are
    professional supplier and exporter for more than 20 years. We offer you
    worldwide solution for C45 round bar steel.

  • Previous:
  • Next:



  • 10 1BB Ball Bearings Hand Bait Casting Fishing Reel left blue
    รับส่วนลด คลิ๊ก : http://p2b.us/266vln

    คุณกำลังต้องการ 10 1BB Ball Bearings Hand Bait Casting Fishing Reel left blue เพื่อช่วยแก้ไขปัญหา อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีสินค้า ที่ท่านต้องการแนะนำ พร้อมมีแหล่งซื้อ สินค้าราคาถูก แนะนำให้ท่าน 10 1BB Ball Bearings Hand Bait Casting Fishing Reel left blue ราคาถูกให้กับคุณ

    Product or service aspects of 10 1BB Ball Bearings Hand Bait Casting Fishing Reel left blue Options: 10 parts of ball bearing additionally a single-way clutch equipment ratio up to six.3:1. CNC equipment minimize aluminum spool. Significant-tensile equipment precision and low sounds. Entirely adjustable cast management with magnetic brake procedure. Exceptional line lay oscillation procedure and unspaced anti-reverse procedure. Detachable quick launch facet plate for rapidly spool adjustments. Well balanced double stainless metal ergonomic take care of with drilled holes. Great resource for fishing. Specs: Model: AF103 Color: Black/Blue Hand:Correct/Remaining Ball bearings: 10 1 Equipment ratio: six.3:1 Product pounds: 203g / seven.2oz Line capacity (mm/m): .29/one hundred twenty .32/a hundred Line capacity (lb/yd): twelve/110 14/ninety Offer size: 13.5 * 10.5 * 7cm /ampnbsp 5.3 * 4.1 * two.8in Offer pounds: Approx. 266g / nine.4oz ข้อมูลจำเพาะของ 10 1BB Ball Bearings Hand Bait Casting Fishing Reel left blue รายการสินค้าในกล่อง 1 x Fishing reel คุณสมบัติทั่วไป ซื้อของออนไลน์ ผ่านเว็บไซต์ ของแท้ ของดี มีคุณภาพ ส่งจริง ส่งเร็ว เก็บเงินปลายทาง OE857SPAA2KMNBANTH-5578826 โมเดล sportschannel-91207.03 Dimension (cm) 12x10x6 Fat (kg) .27 ของแท้ ของดี ส่งฟรี เก็บเงินปลายทาง…

    หมวดหมู่ shop-fishing
    ราคา 760 บาท ถูกที่สุด

    สั่งซื้อพร้อมส่วนลด เก็บเงินปลายทาง http://p2b.us/266vln
    ———————————————————————————-
    คำค้นหา : 10, 1BB, Ball, Bearings, Hand, Bait, Casting, Fishing, Reel, left, blue, 10 1BB Ball Bearings Hand Bait Casting Fishing Reel left blue

    10 #1BB #Ball #Bearings #Hand #Bait #Casting #Fishing #Reel #left #blue #10 1BB Ball Bearings Hand Bait Casting Fishing Reel left blue



    This webinar (shortened version) focuses on understanding the impact new high performance metals are having on tool life and how changes in the manufacturing techniques of tool steels are addressing the failure mechanisms inherent in high demand metalforming applications. These developments are leading to more efficient, repeatable and consistent processes that produce higher quality parts while reducing downtime and ultimately lowering production costs.

    This Webinar reviews the basics of tooling failure mechanisms, the root causes of failures, as well as the manufacturing techniques and processing strategies used to improve tooling performance. The discussion is supported with actual case studies of productivity improvements.

    This is a shortened version. To watch the full webinar (66 minutes), please contact Bohler-Uddeholm USA or Canada:

    USA: www.bcucorp.com
    Canada: www.bucanada.ca

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart