Factory Price AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Wholesale to Monaco

Factory Price
 AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Wholesale to Monaco

Short Description:

AISI 8620 Steel is a low alloy nickel, chromium, molybdenum case hardening steel,generally supplied in the as rolled condition with a maximum hardness HB 255max. SAE steel 8620 offers high external strength and good internalstrength, making it highly wear resistant. AISI 8620 steel has a highercore strength than grades 8615 and 8617. SAE 8620 alloy steel isflexible during hardening treatments, thus enabling improvement ofcase/core properties. Pre hardened and tempered (uncarburized) 8620 ca...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our management ideal for Factory Price AISI 8620 Steel | 1.6523 | 21NiCrMo2 | SNCM220 Wholesale to Monaco, welcomes all overseas friends and merchants to establish collaboration with us. We will provide you with honest, high quality and efficient service to meet your requirements.


    AISI 8620 Steel

    is a low alloy nickel, chromium, molybdenum case hardening steel,
    generally supplied in the as rolled condition with a maximum hardness HB

    255max. SAE steel 8620 offers high external strength and good internal
    strength, making it highly wear resistant. AISI 8620 steel has a higher
    core strength than grades 8615 and 8617.

    SAE 8620 alloy steel is
    flexible during hardening treatments, thus enabling improvement of
    case/core properties. Pre hardened and tempered (uncarburized) 8620 can
    be further surface hardened by nitriding but will not respond
    satisfactorily to flame or induction hardening due to its low carbon
    content.

    Steel 8620 is suited for applications which require a
    combination of toughness and wear resistance. This grade is commonly
    supplied in round bar.

    1. AISI 8620 Steel Supply Range

    8620 Round Bar: diameter 80mm – 1200mm
    8620 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
    8620 Square Bar: 140mm – 460mm
    8620 tubes are also available against your detailed request.
    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. SAE 8620 Steel Specification and Relevant Standards

    Country

    USA DIN BS BS

    Japan

    Standard

    ASTM A29 DIN 1654 EN 10084

    BS 970

    JIS G4103

    Grades

    8620

    1.6523/
    21NiCrMo2

    1.6523/
    20NiCrMo2-2

    805M20

    SNCM220

    3. ASTM 8620 Steels & Equilvalents Chemical Composition

    Standard Grade C Mn P S Si Ni Cr Mo
    ASTM A29 8620 0.18-0.23 0.7-0.9 0.035 0.040 0.15-0.35 0.4-0.7 0.4-0.6 0.15-0.25
    DIN 1654 1.6523/
    21NiCrMo2
    0.17-0.23 0.65-0.95 0.035 0.035 ≦0.40 0.4-0.7 0.4-0.7 0.15-0.25
    EN 10084 1.6523/
    20NiCrMo2-2
    0.17-0.23 0.65-0.95 0.025 0.035 ≦0.40 0.4-0.7 0.35-0.70 0.15-0.25
    JIS G4103 SNCM220 0.17-0.23 0.6-0.9 0.030 0.030 0.15-0.35 0.4-0.7 0.4-0.65 0.15-0.3
    BS 970 805M20 0.17-0.23 0.6-0.95 0.040 0.050 0.1-0.4 0.35-0.75 0.35-0.65 0.15-0.25

    4. AISI 8620 Steel Mechanical Properties

    • 8620 Physical Properties:

    Density (lb / cu. in.) 0.283
    Specific Gravity 7.8
    Specific Heat (Btu/lb/Deg F – [32-212 Deg F]) 0.1
    Melting Point (Deg F) 2600
    Thermal Conductivity 26
    Mean Coeff Thermal Expansion 6.6
    Modulus of Elasticity Tension 31

    • 8620 Steel Mechanical Properties

    Properties Metric Imperial
    Tensile strength 530 MPa 76900 psi
    Yield strength 385 MPa 55800 psi
    Elastic modulus 190-210 GPa 27557-30458 ksi
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel) 80 GPa 11600 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Izod Impact 115 J 84.8 ft.lb
    Hardness, Brinell 149 149
    Hardness, Knoop (converted from Brinell hardness) 169 169
    Hardness, Rockwell B (converted from Brinell hardness) 80 80
    Hardness, Vickers (converted from Brinell hardness) 155 155
    Machinability (hot rolled and cold drawn, based on 100 machinability for AISI 1212 steel) 65 65

    5. Forging of Material 8620 Steel

    AISI

    8620 alloy steel is forged at a start temperature of around 2250ºF
    (1230ºC) down to approximately 1700ºF(925ºC.) prior to the hardening
    heat treatment or carburizing. The alloy is air cooled after forging.

    6. ASTM 8620 Steel Heat Treatment

    • Annealing

    AISI

    8620 steel may be given a full anneal by heat to 820℃ – 850℃, and hold
    until temperature is uniform throughout the section and cool in furnace
    or air cooled.

    • Tempering

    Tempering

    of heat treated and water quenched parts of 8620 steels (not
    carburized) is done at 400 F to 1300 F to improve case toughness with
    minimal effect on its hardness. This will also reduce the possibility of

    grinding cracks.

    • Hardening

    The

    AISI steel 8620 will be austenitized at around 840°C – 870°C, and oil
    or water quenched depending upon section size and intricacy. Cool in Air

    or Oil required.

    • Normalizing

    1675ºF

    (910ºC) and air cool. This is another method of improving machinability

    in 8620 material; normalizing might also be used prior to case
    hardening.

    7. Machinability of SAE 8620 Steel

    The

    8620 alloy steel is readily machined after heat treatment and/or
    carburizing, should be at a minimum so as not to impair the hardened
    case of the part. Machining may be done by conventional means prior to
    heat treatment – after carburizing machining is usually limited to
    grinding.

    8. Welding of 8620 Materials

    The
    alloy 8620 may be welded as rolled condition by conventional methods,
    usually gas or arc welding. Preheating at 400 F is beneficial and
    subsequent heating after welding is recommended – consult the approved
    weld procedure for the method used. However, welding in the case
    hardened or through hardened condition is not recommended

    9. Application of ASTM 8620 Steel

    AISI

    8620 steel material is used extensively by all industry sectors for
    light to medium stressed components and shafts requiring high surface
    wear resistance with reasonable core strength and impact properties.

    Typical

    applications are: Arbors, Bearings, Bushings, Cam Shafts, Differential
    Pinions, Guide Pins, King Pins, Pistons Pins, Gears, Splined Shafts,
    Ratchets, Sleeves and other applications where it is helpful to have a
    steel that can be readily machined and carburized to controlled case
    depths.

  • Previous:
  • Next:



  • A Kuhn Special Steel 1960 óta gyárt kiváló minőségű rozsdamenetesacél alkatrészeket Radevormwaldban. A közepes méretű családi vállalkozás mára mintegy 270 alakalmazottat foglalkoztat. Sikeresen specializálódott a centrifugál öntéssel előállított forgástestek gyártására. A széleskörű gyártási kapacitásnak köszönhetően egyedi késztermékeket is tudnak gyártani a vevői specifikációk szerint.



    I rushed my weapons and applications to inexperienced excellent and increased my design applications ample to obtain the concrete and steel benefits. I also bought the workbench perk but I continue to do not have ample mechanical pieces to craft 1. I actually need 1 so I can ultimately craft my steel applications, which will make the resource gathering a lot quicker.
    I believe I’ll have to go to the hub city and find some mechanical pieces or it’s possible a workbench.

    Complicated: Warrior zombie spawn: extremely significant 120 minutes per day eighteen several hours day cycle loot one hundred% respawn ten days

    Map Seed: Alpha15

    Also, if you want to check out some 7DTD and other folks games with comments, check out these guys:

    Dianddra D: https://www.youtube.com/channel/UCQ_wsBQ13kh6Cd6Wnrzy-jw
    Games4Kickz: https://www.youtube.com/channel/UCpUd5vf6lvW9XeJkTTR8UGw
    JoethePirate: https://www.youtube.com/channel/UCoyeNvnvsQy0zAWajFO4Azg
    Kage848: https://www.youtube.com/channel/UCY6c18sccqyFL6PS5KVpicw
    Mafke: https://www.youtube.com/channel/UC3YOHmSlrvCAS3TENzeqBVQ
    MidnightDesigner: https://www.youtube.com/channel/UCzMJzZ-yuFB4vL2oW8dFpXw
    RongoTheBold: https://www.youtube.com/channel/UC2Uta2ZKTO9D1fwi-r0Vu8w
    sl1pg8r: https://www.youtube.com/channel/UCB9y6hNzccY5rTQlnI1KNqA
    Xeo kills Zeds: https://www.youtube.com/channel/UCuimfLg02d2khMRSoiskcUA

    Songs I employed in this video:

    Appear Enjoy with Me – http://incompetech.com/songs/royalty-free of charge/index.html?isrc=USUAN1400042
    Shed Inside of – https://www.youtube.com/check out?v=e6YS10l_NFY
    Stop – https://www.youtube.com/check out?v=wXpB0X0_xDo
    Melancholy – https://www.youtube.com/check out?v=Lov6SlPzSAg
    Moso – https://www.youtube.com/check out?v=QQxNUgFnQow
    Nightime – https://www.youtube.com/check out?v=b9Ulw79dDYo
    Memories (Jens East) – https://www.youtube.com/check out?v=EicBAjeiPGs
    Icy Vindur – https://www.youtube.com/check out?v=WaEJIxFbAxc
    Down The River – https://www.youtube.com/check out?v=vSyndTkPj7g
    Previous Kiss – https://www.youtube.com/check out?v=cgDQHbkFz_Y
    Ocean – https://www.youtube.com/check out?v=41s4u6l3Vcs
    Appear Enjoy with Me – http://incompetech.com/songs/royalty-free of charge/index.html?isrc=USUAN1400042

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane