Factory directly sale M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory in Jordan
AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2 is a medium alloyed high speed steel which has good machinability. The H-SS M2 chemical composition gives a good combination of well-balanced toughness, wear resistance and red hardness properties. Widely used for cutting tools such as twist drills, taps, milling cutters, saws, knives etc. Also commonly used in cold work punches and dies and cutting applications involving high speed...
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for Factory directly sale M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory in Jordan, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.
is a medium alloyed high speed steel which has good machinability. The
H-SS M2 chemical composition gives a good combination of well-balanced
toughness, wear resistance and red hardness properties. Widely used for
cutting tools such as twist drills, taps, milling cutters, saws, knives
etc. Also commonly used in cold work punches and dies and cutting
applications involving high speed and light cuts.
Grade M2 High Speed Steel is by far the most popular high speed steel replacing high speed steel gradein most applications because of its superior properties and relative economy.
1. Common M2 Tool Steel Related Specifications and Equivalents
2. ASTM M2 Tool Steel Chemical Composition Properties
|M2 regular C||0.78||0.88||0.15||0.40||0.03||0.03||0.20||0.45||3.75||4.50||1.75||2.20||4.50||5.50||5.50||6.75|
|DIN ISO 4957||C||Mn||P||S||Si||Cr||V||Mo||W|
3. AISI HSS M2 Tool Steel Mechanical Properties
Physical Properties of HSS M2 Material
|Density||0.294 lb/in3 (8138 kg/m3)|
|Modulus of Elasticity||0.294 lb/in3 (8138 kg/m3)|
|Thermal conductivity||24 Btu/ft/hr/°F 41.5 W/m/°K|
|Machinability||65% of a 1% carbon steel|
AISI M2 Tool Steels Properties Mechanical
|Hardness, Rockwell C (tempered at 1150°F, quenched at 2200°F)||62||62|
|Hardness, Rockwell C (as hardened, quenched at 2200°F)||65||65|
|Compressive yield strength (when tempered at 300°F)||3250 MPa||471000 psi|
|Izod impact unnotched (when tempered at 300°F)||67 J||49.4 ft-lb|
|Abrasion (loss in mm3, as-hardened; ASTM G65)||25.8||25.8|
|Abrasion (loss in mm3, tempered at 1275°F; ASTM G65)||77.7||77.7|
|Elastic modulus||190-210 GPa||27557-30458 ksi|
M2 Steels Thermal Properties
|CTE, linear (@20.0 – 100°C/ 68.0 – 212°F)||10 μm/m°C||5.56 μin/in°F|
|CTE, linear (@20.0 – 500°C/68.0 – 932°F)||12.2 μm/m°C||6.78 μin/in°F|
|CTE, linear (@20.0 – 850°C/68.0 – 1560°F)||12.6 μm/m°C||7 μin/in°F|
4. Forging of AISI M2 High Speed Steel
heat M2 HSS steel slowly and uniformly to 850-900°C. The heat should
then be increased more quickly to the forging temperature of
1050-1150°C. If during the forging
the temperature of the M2 high speed tool steel material drops below
880-900°C, re-heating will be necessary. Cool the M2 steel component
very slowly after forging.
5. Heat Treatment of M2 Steel HSS
to 1600° F, soak thoroughly at heat. Furnace cool 25° F per hour to
900° F, air cool to room temperature. Approximate annealed hardness 241
Stress Relief of Unhardened Material: Heat slowly
to 1200 to 1250° F. Soak for two hours per inch of thickness at heat.
Slow cool (furnace cool if possible) to room temperature.
Preheat: Heat slowly to 1550° F, soak thoroughly, heat to 1850° F, soak thoroughly.
time in the furnace varies from a few minutes to a 15 minutes,
depending tool size, heat capacity of the furnace, and the size of the
charge. – Heat to 2150 to 2200° F for max. toughness and minimum
distortion. – Heat to 2250 to 2275° F for max. hardness and abrasion
hardness, oil quench to 150-200° F. Air quench to 150° F. When quenching
in hot salt maintain the quench just above the Ms temperature. After
equalizing withdraw parts from the hot salt and air cooled to 150° F.
temper is mandatory, three tempers are sometimes preferred. Soak for 2
hours per inch of thickness. Air cool to room temperature between
tempers. The best tempering range for hardness, strength and toughness
is 1000 to 1050° F.
|Temper° F||Rockwell “C”||Temper° F||Rockwell “C”|
6. Machinability of AISI M2 Tool Steel H-SS
of HSS M2 tool steels can be carried out using grinding methods.
However, they have poor grinding capability and hence they are regarded
as “medium” machinability tool steel under annealed conditions. The
machinability of these tool steels M2 is only 50% of that of the easily
machinable W group or water hardening tool steels.
7. M2 Tool Steel Applications
The main use of high-speed steels continues to be in the manufacture of various cutting tools.
applications for M2 high speed steel are twist drills, reamers,
broaching tools, taps, milling tools, metal saws. M2 is suitable for
cold forming tools such as extrusion rams and dies, also widely used in
all kinds of cutting tools, knife and punches and die applications,
plastic moulds with elevated wear resistance and screws.
Cast iron vs cast steel . Reliance blog reliance foundry co. Ltd. , here, we’ll compare cast iron to cast steel to get a sense of how to get the best performance out of each material. Many materials can be , steel vs cast iron iron is a hard grey metal, and heavier than any of the other elements found on earth. During a process, impurities or slag is an iron alloy with an amount of carbon superior to ,. Carbon steel cookware is often compared with cast iron. While the two materials are very similar, carbon steel actually contains less carbon and more iron. Carbon steel is composed of roughly percent iron to percent carbon, while cast iron normally contains to percent carbon to to percent iron , main difference cast iron vs steel. Cast iron and steel are forms of alloy containing iron and carbon. An alloy is a pure mixture of metals or a , carbon steel is sort of a brother from another mother to cast iron they have a ton in common, but they also have their distinct characteristics, therefore, no big difference considering from the chemical content and raw materials for cast iron vs cast steel. However, their physical properties have many , having a hard time deciding between a carbon steel or cast iron skillet? asked me to write another comparing cast iron vs carbon steel frying pans. The difference in weight and capacity to heat up and cool down more , . , therefore, no big difference considering from the chemical content and raw materials for cast iron vs cast steel. However, their physical , a major difference between carbon steel and cast iron is that carbon steel is more ductile than cast iron, while cast iron is more brittle than , as far as crank shafts go there is a difference between iron, ductile iron, cast steel & forged steel. The only thing missing in the question is the . Difference between iron and steel steel can be permanently magnetized. Cast iron can not be welded while steel can be welded. Cast iron is brit while steel there is a world of difference between the two and cast iron will be unmistakable, steel will throw long streamers with few side shoots (at least , engine blocks and heads are typically always cast iron while things such as and wait minutes between passes so you dont over heat the area. No, they’re cast steel, vs. High performance ones that are forged steel two popular bathtub materials are steel and cast iron. How to repaint old cast iron bathtubs compare enameled steel sinks vs. Enameled cast iron sinks , what’s the difference between carbon steel and cast iron? that i could formulate into an argument about when to use one versus the other cast iron is a group of iron carbon alloys with a carbon content greater than . When it comes to steel, casting offers benefits such as design flexibility, isotropic however, noticeable differences do exist between the two that can affect the a look at the differences between iron and steel. [xv] that is to say, a type of metal so carbon rich that it can only be worked through liquefaction and cast forming. Made from wrought iron versus maille made today with low carbon steel