Factory Cheap Hot EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Manufacturer in California
EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory Cheap Hot EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Manufacturer in California, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.
is an important alloy engineering steel grade as per BS EN
10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
resistance to overheating, but the white sensitivity of 34CrNiM06 is
high. It also has the temper brittleness, so the weldability of
34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
temperature preheating before welding in order to eliminate the stress
after welding processing.
1.EN Steel 34CrNiMo6 Supply Range
Round Steel Bar Sizes: diameter 80mm – 1200mm
Other steel shape and sizes available according to your requirements.
Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.
2.EN 34CrNiMo6 Steel Standards And Equivalents
|BS EN 10083 -3: 2006||34CrNiMo6 / 1.6582||: 2004||4337|
|BS EN 10250 – 3: 2000|
3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties
|BS EN 10083 – 3:2006||34CrNiMo6
|0.30-0.38||0.5-0.8||0.40 max||0.025 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|BS EN 10250-3:2000||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.38||0.5-0.8||0.40 max||0.035 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|ASTM A29: 2004||4337||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.40||0.6-0.8||0.20-0.35||0.035 max||0.040 max||0.70-0.90||0.20-0.30||1.65-2.00|
4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel
|Properties||< 16||>16 – 40||>40 – 100||>100 – 160||>160 – 250|
|Thickness t [mm]||< 8||8<t<20||20<t<60||60<t<100||100<t<160|
|Yield strength Re [N/mm²]||min. 1000||min. 900||min. 800||min. 700||min. 600|
|Tensile strength Rm [N/mm2]||1200 – 1400||1100 – 1300||1000 – 1200||900 – 1100||800 – 950|
|Elongation A [%]||min. 9||min. 10||min. 11||min. 12||min. 13|
|Reduction of area Z [%]||min. 40||min. 45||min. 50||min. 55||min. 55|
|Toughness CVN [J]||min. 35||min. 45||min. 45||min. 45||min. 45|
5.Heat Treatment of 34CrNiMo6 Engineering Steel
Quenched and Tempered (Q+T) of 34CrNiMo6 Steel
Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;
Soak at this hardening temperature quench in oil;
Temper as soon as 34CrNiMo6 steels reach room temperature.
Heat uniformly to the suitable temperature;
Withdraw from the furnace and cool in the air.
The usual tempering temperature is 600°C which depending on the actual requirements.
6.Forging of DIN 34CrNiMo6 / 1.6582 Steel
Hot forming temperature: 1100-900oC.
7.Machinability of Steel 34CrNiMo6
is best done with this 1.6582 alloy steel in the annealed or normalized
and tempered condition. It can be machined by all conventional methods.
alloy materials can be fusion or resistance welded. Preheat and post
heat weld procedures should be followed when welding this alloy by
34CrNiMo6 steel is used to make tools which demands good plasticity and
high strength. It is usually selected to make the big size and important
parts, such as heavy machinery axle,turbine shaft blade, high load of
transmission parts, fasteners, crank shafts, gears, as well as heavily
loaded parts for motor construction etc.
Otai Steel is reliable to
supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
Please tell us your detailed requirements and have the best offer soon.
Volvo has a history of making high-performance station wagons, and this one is the fastest yet. In fact, it’s the third-quickest wagon Motor Trend has ever tested, thanks to all-wheel drive and a 345-hp turbocharged straight-six: 0-60 happens in just 5.0 seconds. It comes outfitted from the factory with Öhlins dampers, 6-piston Brembo brakes, Michelin Pilot Super Sport tires, and enough cargo capacity to empty out your local supermarket. We love wagons because they lose almost nothing in performance compared to the sedans they’re based on — and they’re often even better-looking. This Volvo is easily the prettiest wagon around (especially with the Thule roof rack we put on it), and it sounds as great as it looks. On this episode of Ignition, presented by Tire Rack (http://www.tirerack.com), Motor Trend Senior Features Editor Jason Cammisa takes to the mountains to show us just how great Sweden’s winter hot-rod does in the snow.
Ignition appears every other Monday on the Motor Trend Youtube channel. http://www.youtube.com/motortrend
Subscribe now to make sure you’re in on all the action!
Facebook – http://facebook.com/motortrendmag & https://www.facebook.com/mt.ignition
Twitter – http://twitter.com/motortrend & https://twitter.com/mt_ignition
Google+ – https://plus.google.com/+motortrend/p…
Instagram – @mt_ignition
Website – http://www.motortrend.com
Guiding The Scenes – https://www.youtube.com/RomanAtwoodVlogs
Past Months Prank – http://youtu.be/KZ0WWL1atmE
Observe me In this article – http://www.fb.com/RomanAtwood
Instagram – RomanAtwood
Much more Pranks In this article – http://www.youtube.com/RomanAtwood
Smile Much more Shop- http://www.RomanAtwood.com
Thanks so considerably for observing.Be sure to support us out by sharing with some close friends! Really like you men!