Factory Cheap Hot EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Hanover

Factory Cheap Hot EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Hanover

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding proc...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Factory Cheap Hot EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Hanover, If you have any comments about our company or products, please feel free to contact us, your coming mail will be highly appreciated.


    EN 34CrNiMo6 Steel

    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good

    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.


    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm2] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

      Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

      Soak at this hardening temperature quench in oil;

      Temper as soon as 34CrNiMo6 steels reach room temperature.

      Heat uniformly to the suitable temperature;

      Withdraw from the furnace and cool in the air.

      The usual tempering temperature is 600°C which depending on the actual requirements.

      6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

      Hot forming temperature: 1100-900oC.

      7.Machinability of Steel34CrNiMo6

      Machining

      is best done with this 1.6582 alloy steel in the annealed or normalized

      and tempered condition. It can be machined by all conventional methods.

      8.Welding

      The

      alloy materials can be fusion or resistance welded. Preheat and post
      heat weld procedures should be followed when welding this alloy by
      established methods.

      9.Application

      EN DIN
      34CrNiMo6 steel is used to make tools which demands good plasticity and
      high strength. It is usually selected to make the big size and important

      parts, such as heavy machinery axle,turbine shaft blade, high load of
      transmission parts, fasteners, crank shafts, gears, as well as heavily
      loaded parts for motor construction etc.

      Otai Steel is reliable to

      supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
      Please tell us your detailed requirements and have the best offer soon.

    • Previous:
    • Next:



  • Online Shopping for Kitchen Utensils amp; Gadgets from a great selection at everyday low prices. Free 2-day Shipping with Prime…
    For more details please visit: http://sekut.top/bestseller/-stainless-steel-ice-pop-mold-ice-cream-mold-popsicle-mold-125ml-squa-B00N9TD77C.html Thank You!

    Great Stainless Steel Ice Pop Mold Ice Cream Mold Popsicle Mold 125ml Squa Review
    Stainless Steel Ice Pop Mold Ice Cream Mold Popsicle Mold 125ml Squa For Sale
    Stainless Steel Ice Pop Mold Ice Cream Mold Popsicle Mold 125ml Squa Unboxing
    Review Stainless Steel Ice Pop Mold Ice Cream Mold Popsicle Mold 125ml Squa Product

    https://www.youtube.com/watch?v=8sM7MujhLoo



    http://MuggyWeld.com SSF-6 Silver Solder can braze copper nickel, cupre nickel, copper, brass, bronze, steel, or stainless in any combination. This product can be successfully applied using MAPP, natural gas, oxyacetylene, or propane.

    This unique brazing rod is stronger than most MIG welding wires, at more than 70,000 PSI

    For more videos and information, or to order, visit http://MuggyWeld.com

    Please read all instructions prior to use at: http://muggyweld.com/packets/ssff6ssq6postsale.pdf

    _______________________

    Please visit http://www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at http://muggyweld.com/safety-guidelines.

    Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.

    MSDS sheets available with purchase from MuggyWeld.com, upon request.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car