Factory Cheap BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory for Netherlands

Factory Cheap
 BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory for Netherlands

Short Description:

BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for Factory Cheap BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory for Netherlands, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now


    BS EN 42crmo4 Alloy Steel

    is a common chromium-molybdenum steel that usually used after quenched
    and tempered, with high intensity, high hardenability. BS EN 42CrMo4
    round steel has better performance than 34CrMo4 steel due to the carbon
    and chromium content is higher. 42CrMo4 alloy steel

    has higher strength and hardenability. The 42CrMo4 alloy material also
    has high fatigue strength and good low-temperature impact toughness. The

    temper brittleness is not obvious.

    Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more

    preferable in terms of material properties. EN 42CrMo4 alloy
    engineering steel materials have been widely used in automotive driving
    elements. Otai Steel is able to supply you prime quality of 42CrMo4
    alloy steel materials with wide range.

    1.42CrMo4 Alloy Steel Supply Range

    42CrMo4 Round bar Sizes: 80mm – 1200mm
    Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
    Other steel shape and sizes available according to your requirements.

    Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.

    2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents

    BS EN 10250 Material No. DIN ASTM A29 JIS G4105 BS 970-3-1991 BS 970-1955 AS 1444 AFNOR
    42CrMo4 1.7225 38HM 4140 SCM440 708M40 EN19A 4140 42CD4

    3.42CrMo4 Alloy Steel Chemical Composition

    42CrMo4/1.7225 C Mn Si P S Cr Mo
    0.38-0.45 0.60-0.90 0.40 max 0.035 max 0.035 max 0.90-1.20 0.15-0.30

    4. DIN 42CrMo4 Alloy Steel Mechanical Properties

    Size Ø mm Yield stress
    Rp0.2,N/nn2, min.
    Ultimate tensile Stress,
    Rm,N/nn2
    Elongation
    A5,%, min.
    Hardness HB Toughness
    KV, Joule, min.
    <40 750 1000-1200 11 295-355 35 at 20ºC
    40-95 650 900-1100 12 265-325 35 at 20ºC
    >95 550 800-950 13 235-295 35 at 20ºC

    5. Heat Treatment of 42CrMo4 Steels

    Annealing of 42CrMo4 Steels

    • Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;

    • Cool slowly in the furnace to the temperature 480°;

    • Complete annealing the steel in the air.

    Quenched and Tempered (Q+T)

    • Heat 42CrMo4 steel slowly to 880°C;

    • Soak at this temperature then quench in oil;

    • Temper as soon as 42CrMo4 steel reach room temperature (20°C);

    • Heat uniformly to the suitable temperature of 560°C;

    • Withdraw the 42CrMo4 material from the furnace and cool in the air.

    6. Forging of 42CrMo4 Alloy Steel

    • Preheat 42CrMo4 engineering steel uniformly and slowly;

    • Increase the forging temperature up to 1150-1200°C.

    • Always keep the forging temperature above at least 850°C

    7.Weldability

    Engineering

    steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
    strongly recommended; the upper limit should not be exceeded because of
    risk for deterioration of the chrome layer.

    Alloy steel 42CrMo4
    can be friction welded. However, precautions are necessary so as to
    limit the formation of undesirable microstructures in the welded zone.

    8.Application of 42CrMo4 Alloy Steels

    EN

    42CrMo4 alloy steel is widely used for engineering steel purpose, such
    as: making various kinds of machinery, automobile, mining spare part,
    the gearwheel of the engine, the driving gear of supercharger, the
    connecting rob, the pinchock under the high pressure, parts for power
    train applications, cold formed fastener components, shafts, gears,
    drill collars for the oil exploration, etc.

  • Previous:
  • Next:



  • Erosion is very common in manufacturing, during which material failure occurs and contact interfaces keep changing. Here by Abaqus, I simulation a case that a steel rod erodes a steel plate at 2000 m/s. Thanks for your watch.



    CNC pipe cutting machine,8mm thickness,6m length,200mm diameter | EMAIL: lijiao@goldenlaser.org | WEB: http://www.goldenlaser.org | 500W fiber laser machine cutting round,square,rectangular,triangular pipe tubes and other steel molding.

    High Precision Metal Pipe Laser Cutting Machine Model No. GJMSJG-20600G / 20300G

    Product Feature
    1. This laser cutting machine is for metal pipes and tubes cutting. It can cut round pipes, square pipes, flat pipes and elliptic pipes. Cutting thickness is 1~5mm. (length of pipes is 6m, diameter of round pipes is 200mm and diameter of other pipe is less than 200mm.) (machine can be customized if pipes of length longer than 6m or diameter more than 200mm)
    2. It can cut multiple different diameter of intersecting line of cylinder in different directions. Then it can make branch pipe axis eccentric/concentric vertical intersect main pipe axis.
    3. In the branch pipe end cutting cylinder intersecting end, meet the vertical axis and axis condition branch director and non eccentric inclined intersect.
    4. It can cut obligue section on the end of pipes.
    5. It can cut the intersecting line cutting intersecting ring main branch pipe end.
    6. It can cut various-angle groove face.
    7. It can cut multiple special graphics on pipes and cut off pipes.
    8. Sized optional path decreases light loss and increase accuracy stability.

    Application Field
    Suitable for carbon steel, stainless steel, alloy steel, spring steel, copper, aluminum, titanium and other metal pipes.

    Applicable to sheet metals, hardware, kitchen ware, metal crafts and other metal pipe cutting.

    Welcome to visit our factory or asking for a reference.
    Below information will help us to recommend suitable laser solution soon.
    1,What kind of metal need to cut ? diameter size and thickness?
    2,After cutting,what is the final product?
    3,Are you users or laser machine distributors?

    Attn.: Ms Kelly Lee
    Company: Wuhan Golden Laser Co.,Ltd
    E-mail: lijiao@goldenlaser.org
    Website: http://www.goldenlaser.org

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane