Discountable price EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Bulgaria

Discountable price
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Bulgaria

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for Discountable price EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Bulgaria, Competitive price with high quality and satisfying service make us earned more customers.we wish to work with you and seek common development.


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • In this video, This Old House senior technical editor Mark Powers shows how to install a library ladder. (See below for a shopping list and tools.)

    Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse

    How to Build a Timber Retaining Wall: https://www.youtube.com/watch?v=qaMPqKp6yvk&index=9&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV

    How to Build a Picnic Table: https://www.youtube.com/watch?v=nyB8mFXZdEI&index=292&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV

    How to Build a Tool Storage Cabinet: https://www.youtube.com/watch?v=WBT7K71IAow&index=261&list=PLkJADc1qDrr_0NxtmzECiOWkr5de82kXV

    Shopping List for How to Build a Rolling Library Ladder:
    - 1×4 oak boards, Get two 10-footers for the handrails.
    - 1×5 oak boards. Get one 10-footer for the treads.
    - 3/4-inch oak spindle. Get one 15 1/4-inch-long piece.
    - Ladder hardware kit. Order one that includes rollers, wheels, and fasteners.
    - Track hardware. Order a track to fit the width of your bookcase, plus brackets and finials.
    - Wood glue
    - Primer
    - Paint

    Tools for How to Build a Rolling Library Ladder:
    - Tape measure
    - Miter saw
    - Combination square
    -Jig saw or Circular saw
    - Drill/driver
    - Clamps
    - Router
    - 7/8-inch Forstner bit
    - 13/16-inch straight router bit
    - 3/8-inch roundover router bit with pilot
    - 1/8-inch bit
    - 1/4-inch bit
    - 23/64-inch bit
    - 120-grit sandpaper
    - 2 1/2-inch angled sash brush
    - Mallet
    - Hex-key wrench
    - Adjustable wrench
    - Phillips-head screwdriver
    - 2-foot level

    Follow This Old House:
    Facebook: https://www.facebook.com/ThisOldHouse
    Twitter: https://twitter.com/thisoldhouse
    Pinterest: http://www.pinterest.com/thisoldhouse/
    G+: https://plus.google.com/+thisoldhouse/posts
    Instagram: http://instagram.com/thisoldhouse
    Tumblr: http://thisoldhouse.tumblr.com/



    If you’d like a kit, send me a note. rimpainter2@gmail.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag