Customized Supplier for H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Manufacturer in Namibia

Customized Supplier for
 H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Manufacturer in Namibia

Short Description:

H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19. AISI H-13 tool steel is characterized by: Good resistance to abrasion at both low and high temperatures High level of toughness and ductility Uniform and high level of machinability and polishability Good high-temperature strength and resistance to t...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Customized Supplier for H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Manufacturer in Namibia, We will wholeheartedly welcome all clients in the industry both at home and abroad to cooperate hand in hand, and create a bright future together.


    H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.

    AISI H-13 tool steel is characterized by:

    • Good resistance to abrasion at both low and high temperatures

    • High level of toughness and ductility

    • Uniform and high level of machinability and polishability

    • Good high-temperature strength and resistance to thermal fatigue

    • Excellent through-hardening properties

    • Very limited distortion during hardening

    In
    steel H13, the molybdenum and vanadium act as strengthening agents. The
    chromium content assists die steel H-13 to resist softening when used
    at high temperatures. H-13 die steels offers an excellent combination of
    shock and abrasion resistance, and possesses good red hardness. It is
    capable of withstanding rapid cooling and resists premature heat
    checking. Tool Steel H13 has good machinability, good weldability, good
    ductility, and can be formed by conventional means.

    Due to H13
    tool steel excellent combination of high toughness and fatigue
    resistance, AISI H13 hot work tool steel is used more than any other
    tool steel in tooling applications.

    1. Common H13 Tool Steel Related Specifications

    Country USA German Japan
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404
    Grades H13 1.2344/X40CrMoV5-1 SKD61

    2. H13 Tool Steel Chemical Composition

    ASTM A681 C Mn P S Si Cr V Mo
    H13 0.32 0.45 0.2 0.6 0.03 0.03 0.8 1.25 4.75 5.5 0.8 1.2 1.1 1.75
    DIN ISO 4957 C Mn P S Si Cr V Mo
    1.2344 /X40CrMoV5-1 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.85 1.15 1.1 1.5
    JIS G4404 C Mn P S Si Cr V Mo
    SKD61 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.8 1.15 1.0 1.5

    3. AISI H13 Steel Mechanical Properties

    Properties

    Metric Imperial
    Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) 1200 – 1590 MPa 174000 – 231000 psi
    Tensile strength, yield (@20°C/68°F, varies with heat treatment) 1000 – 1380 MPa 145000 – 200000 psi
    Reduction of area (@20°C/68°F) 50.00% 50.00%
    Modulus of elasticity (@20°C/68°F) 215 GPa 31200 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30

    4. Forging of H13 Tool Steel
    Heating for forging must be done slowly and uniformly. Soak through at
    1900°-2000°F and reheat as often as necessary, stopping work when the
    temperature drops below 1650°F. After forging, cool slowly in lime,
    mica, dry ashes or furnace. H-13 should always be annealed after
    forging.

    5. Heat Treatment for H13 Tool Steels

    • Annealing

    Heat
    slowly to 1550°-1650°F, hold until entire mass is heated through, and
    cool slowly in the furnace (40F per hour) to about 1000°F, after which
    cooling rate may be increased. Suitable precautions must be taken to
    prevent excessive carburization or decarburization.

    • Stress Relieving

    When
    desirable to relieve the strains of machining, heat slowly to
    1050°-1250°F, allow to equalize, and then cool in still air (Strain
    Relieving). Â

    • Preheat Prior to Hardening

    Warm slightly before charging into the preheat furnace, which should be operating at 1400°-1500°F.

    • Hardening

    H13
    tool steel is a steel having very high hardenability and should be
    hardened by cooling in still air. The use of a salt bath or controlled
    atmosphere furnace is desirable to minimize decarburization, and if not
    available, pack hardening in spent pitch coke is suggested. The
    temperature employed is usually 1800°-1850°F, depending on size section.

    • Quenching

    Quench
    in still air or dry air blast. If complicated forms are to be hardened,
    an interrupted oil quench can be used. Quench part in oil and remove
    from bath when it just loses its color (1000°-1100°F). Finish cooling to
    below 150°-125°F in air, then temper immediately.

    • Tempering

    Tempering
    practice may vary with size and application, but is usually performed
    in the range of maximum secondary hardness or higher. Double tempering
    is recommended. The results below is H13 that was air quenched from
    1800°F and tempered for 4 hours at various temperatures. The results may
    be used as a guide, keeping in mind that parts of heavy section or mass
    may be several points lower in hardness.

    6. Application of AISI H13 Tool Steel

    • As Tools for Extrusion

    Part Aluminium, mag­nesium alloys, HRC Copper al­loys HRC Stainless steel HRC
    Dies, Backers, die-holders, liners, dummy blocks, stems 44-50 43-47 45-50
    41-50 40-48 40-48

    Austenitizing temperature

    1,870-1,885°F 1,900-1,920°F
    (1,020-1,030°C) (1,040-1,050°C)
    • As Plastic Molding Tool Steel

    Part Austenitizing temp. HRC
    Injection molds Compression/ transfer molds 1,870-1,885°F (1,020-1,030°C) 50-52
    Tempering 480°F (250°C)
    • Other Applications

    Applications Austenitizing temp HRC
    Severe cold punching, scrap shears 1,870-1,885°F 50-52
    (1,020-1,030°C)
    Tempering 480°F (250°C)
    Hot shearing 1,870-1,885°F
    (1,020-1,030°C) 50-52
    Tempering 480°F (250°C) or
    1,070-1,110°F 45-50
    (575-600°C)
    Shrink rings (e.g. for cemented carbide dies) 1,870-1,885°F 45-50
    (1,020-1,030°C)
    Tempering 1,070-1,110°F
    (575–600°C)
    Wear-resisting parts 1,870-1,885°F Core
    50-52
    Surface
    ~1000HV1
    (1,020-1,030°C)
    Tempering 1,070°F (575°C)
    nitrided

     

    If
    there are any queries about AISI H13 tool steel for hot working
    applications, please feel free to leave a comment below. And welcome
    enquiry of AISI H13 tool steel, we are professional and reliable
    supplier  for prime H13 tool steel materials.

  • Previous:
  • Next:



  • This HD documentary film is about how the fastest plane in the world became to be known as the North American X-15. While its not the fastest jet in the world, the North American X-15 is considered the fastest plane in aviation history setting top speed and altitude aircraft speed record in the 1960s, reaching the edge of outer space, nearly reaching mach 7. The purpose of the X-Pane Program was to design an aircraft capable of sending a man into space and being him back safety built to carry a man into space while collecting valuable data to be used in NASA’s Mercury Space Program. The heart of the X-15 is a hyper-sonic rocket-powered XLR99 engine generating 57,000 pounds-force (250 kN) of thrust. This revolutionary rocket engine was a super advanced variable propulsion engine, designed from modern titanium alloys, allowing the pilot to adjust thrust. As of 2016, the X-15 holds the aircraft speed record for the fastest plane in the world speed ever recorded by a manned, powered aircraft, and is only of the best airplane in the world. It could reach a top speed of 4,520 miles per hour (7,274 km/h), or Mach 6.72. All pilots who flew the X-15 earned themselves astronaut wings. The fastest jet in the world is the SR-71 Blackbird.

    For new online information on the X-15 Rocket Plane go:

    https://en.wikipedia.org/wiki/North_American_X-15

    https://en.wikipedia.org/wiki/Lockheed_SR-71_Blackbird

    Watch Full Extreme Videos Playlist:

    Watch, Subscribe and follow official YouTube channel on:

    https://documentarytube.net

    https://www.facebook.com/documentarytube.net

    https://twitter.com/DocArchive



    September 25th sees the worldwide release of Rammstein’s “In Amerika” (DVD & Blu-ray), a lavish package containing a major new documentary about the band, Rammstein In Amerika; a short film about the making of their “Liebe Ist Für Alle Da” album; and the whole of their legendary Madison Square Garden show.

    “Rammstein In Amerika” is available here:
    ► DVD – http://ramm.st/InAmerika_DVD
    ► Blu-ray – http://ramm.st/InAmerika_Bluray

    ► Website: http://www.rammstein.com
    ► Shop: http://shop.rammstein.de

    Biography:
    Rammstein were formed in 1993 by an assembly of factory-weary proletarians raised in East Germany. They took their name (adding an “m”) from the location of a German tragedy where 80 people were hurt and killed as the result of a crash during an American Air Force flight show.

    (The literal translation of “ram stein” is a battering ram made of stone.) Word of Rammstein’s horror/romanticist blend of theater and music — one-time Olympic swimmer Till Lindemann would sing entire songs engulfed in flame from head to toe — spread quickly. The band’s first album, Herzeleid (Heartache), built on the grounds created by the band’s live reputation. Scaling the German charts (and remaining there until the release of the second Rammstein LP some two years later), the album also introduced the band to the world outside of the Germany/Switzerland/Austria region. As Rammstein’s second album, Sehnsucht (Longing), was released, the band was headlining throughout Europe to crowds of 10,000 to 30,000 people. Sehnsucht entered the German charts at number one immediately upon its release and came very close to doing the same in Austria and Switzerland. Within weeks, entries on other countries’ charts had Sehnsucht rubbing elbows with the Prodigy, Radiohead, and the Rolling Stones on Billboard’s cumulative Eurochart. From there the fever spread, transcending any perceived language barrier. Mutter followed in 2001, Reise, Reise in 2004, and the live collection Volkerball in 2006. Liebe Ist fur Alle Da followed in 2009. A limited edition of the album was packed in a metal suitcase that also housed six sex toys, one for each member of the band. ~ Ed Nimmervoll, Rovi

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car