China Wholesale for Metal Forms Factory in Myanmar
Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker) Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg Discs, pu...
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of China Wholesale for Metal Forms Factory in Myanmar, "Passion, Honesty, Sound service, Keen cooperation and Development" are our goals. We are here expecting friends all over the world!
Steel products can also be divided by their shapes. We can produce in the following shapes:
|Length||up to 16,000 mm|
|Round||from 80 to 1,200 mm Ø|
|Square||from 140 mm to 460 mm|
|Flat||from 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
|Barrel/flange diameter||up to 1.600 mm Ø|
|Length||up to 15.000 mm|
|Weight||from 10 kg to 35.000 kg|
Discs, punched discs, hubs
|Diameter||up to 1.200 mm
(smaller dias correspondingly thicker)
|Thickness||up to 600 mm|
Blocks, plates (forged three-dimensionally)
|Length||max. 6.000 mm|
|Width||max. 1.800 mm|
|Thickness||max. 1.000 mm
(in case of smaller thickness greater length and width)
|Weight||max. 30.000 kg|
Forged tubes, cylinders and other hollow forgings
|Inner diameter||160 mm to 600 mm|
|Length||up to 1,200 mm|
|Weight||up to 10.000 kg|
|Outer diameter||up to 2.400 mm|
|Height||up to 2.200 mm|
|Weight||up to 25.000 kg|
Seamless rolled rings
|Outer diameter||up to 3.500 mm|
|Height||up to 800 mm|
|Weight||10 kg to 8.000 kg|
We can also produce according to clients' designs. If you have your own design, just feel free to contact us.
The Polyshot Pipette Tip Mold was conceived, designed and built as a complete integrated system with the hot runner system. This thinking allows the mold to be controlled and adjusted both thermally and mechanically, resulting in the best pipette tip possible.
The features and design of this mold are the result of input from some of the world’s finest and most skilled producers of pipette tips. The ability to service the mold easily, the unique cavity construction using PMT technology from Plasel Mold and huge cooling capacity of the mold make it unique in the industry.
The Plasel PMT Cavity Technology Advantage
The Polyshot Pipette Tip Mold features cavity sections with technology developed by Plasel Mold, of Lavon Israel. This technology, referred to as PMT (powered metal technology), allows cavity section production with cavity to cavity accuracy of less than 5 microns. The use of a master mold for each cavity or cavity section guarantees each component to be precisely the same, including all future spare cavity components.
The technology allows the cavity sections to be produced as an integrated one piece unit or with individual sections stacked as wafers. Spares can be ordered with the mold or delivered in as little as 3 weeks at any point after the initial order.
Key components such as the core pin receiving buttons are designed for easy resurfacing without the use of shims or adjustments. This is accomplished with an adjusting feature that forces them up against the cavity sections. This feature also allows the receiving buttons to be of unequal size in the mold with no loss of precision.
When commissioning a new mold, the positions of the 4 major cavity clusters can be moved in the X and Y axis for ultra precise centering of part wall thickness. This is accomplished by adjustments to the hardened tool steel receiving rails, 4 for each cluster. Once this is set, the clusters can be removed and replaced with absolute repeatability.
Connect with us:
Polyshot Hot Runner Systems
75 Lucius Gordon Drive
W. Henrietta, NY 14586