China Top 10 H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to Montpellier

China Top 10 H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to Montpellier

Short Description:

H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19. AISI H-13 tool steel is characterized by: Good resistance to abrasion at both low and high temperatures High level of toughness and ductility Uniform and high level of machinability and polishability Good high-temperature strength and resistance to thermal ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for China Top 10 H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Wholesale to Montpellier, Please send us your specifications and requirements, or feel free to contact us with any questions or inquiries that you may have.


    H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.

    AISI H-13 tool steel is characterized by:

      Good resistance to abrasion at both low and high temperatures

      High level of toughness and ductility

      Uniform and high level of machinability and polishability

      Good high-temperature strength and resistance to thermal fatigue

      Excellent through-hardening properties

      Very limited distortion during hardening

      In
      steel H13, the molybdenum and vanadium act as strengthening agents. The
      chromium content assists die steel H-13 to resist softening when used
      at high temperatures. H-13 die steels offers an excellent combination of
      shock and abrasion resistance, and possesses good red hardness. It is
      capable of withstanding rapid cooling and resists premature heat
      checking. Tool Steel H13 has good machinability, good weldability, good
      ductility, and can be formed by conventional means.

      Due to H13
      tool steel excellent combination of high toughness and fatigue
      resistance, AISI H13 hot work tool steel is used more than any other
      tool steel in tooling applications.

      1. Common H13 Tool Steel Related Specifications

      Country USA German Japan
      Standard ASTM A681 DIN EN ISO 4957 JIS G4404
      Grades H13 1.2344/X40CrMoV5-1 SKD61

      2. H13 Tool Steel Chemical Composition

      ASTM A681 C Mn P S Si Cr V Mo
      H13 0.32 0.45 0.2 0.6 0.03 0.03 0.8 1.25 4.75 5.5 0.8 1.2 1.1 1.75
      DIN ISO 4957 C Mn P S Si Cr V Mo
      1.2344 /X40CrMoV5-1 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.85 1.15 1.1 1.5
      JIS G4404 C Mn P S Si Cr V Mo
      SKD61 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.8 1.15 1.0 1.5

      3. AISI H13 Steel Mechanical Properties

      Properties

      Metric Imperial
      Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) 1200 – 1590 MPa 174000 – 231000 psi
      Tensile strength, yield (@20°C/68°F, varies with heat treatment) 1000 – 1380 MPa 145000 – 200000 psi
      Reduction of area (@20°C/68°F) 50.00% 50.00%
      Modulus of elasticity (@20°C/68°F) 215 GPa 31200 ksi
      Poisson’s ratio 0.27-0.30 0.27-0.30

      4.Forging of H13 Tool Steel
      Heating for forging must be done slowly and uniformly. Soak through at
      1900°-2000°F and reheat as often as necessary, stopping work when the
      temperature drops below 1650°F. After forging, cool slowly in lime,
      mica, dry ashes or furnace. H-13 should always be annealed after
      forging.

      5.Heat Treatment for H13 Tool Steels

        Annealing

        Heat
        slowly to 1550°-1650°F, hold until entire mass is heated through, and
        cool slowly in the furnace (40F per hour) to about 1000°F, after which
        cooling rate may be increased. Suitable precautions must be taken to
        prevent excessive carburization or decarburization.

          Stress Relieving

          When
          desirable to relieve the strains of machining, heat slowly to
          1050°-1250°F, allow to equalize, and then cool in still air (Strain
          Relieving).

            Preheat Prior to Hardening

            Warm slightly before charging into the preheat furnace, which should be operating at 1400°-1500°F.

              Hardening

              H13
              tool steel is a steel having very high hardenability and should be
              hardened by cooling in still air. The use of a salt bath or controlled
              atmosphere furnace is desirable to minimize decarburization, and if not
              available, pack hardening in spent pitch coke is suggested. The
              temperature employed is usually 1800°-1850°F, depending on size section.

                Quenching

                Quench
                in still air or dry air blast. If complicated forms are to be hardened,
                an interrupted oil quench can be used. Quench part in oil and remove
                from bath when it just loses its color (1000°-1100°F). Finish cooling to
                below 150°-125°F in air, then temper immediately.

                  Tempering

                  Tempering
                  practice may vary with size and application, but is usually performed
                  in the range of maximum secondary hardness or higher. Double tempering
                  is recommended. The results below is H13 that was air quenched from
                  1800°F and tempered for 4 hours at various temperatures. The results may
                  be used as a guide, keeping in mind that parts of heavy section or mass
                  may be several points lower in hardness.

                  6. Application of AISI H13 Tool Steel

                    As Tools for Extrusion

                    Part Aluminium, mag-nesium alloys, HRC Copper al-loys HRC Stainless steel HRC
                    Dies, Backers, die-holders, liners, dummy blocks, stems 44-50 43-47 45-50
                    41-50 40-48 40-48

                    Austenitizing temperature

                    1,870-1,885°F 1,900-1,920°F
                    (1,020-1,030°C) (1,040-1,050°C)

                      As Plastic Molding Tool Steel

                      Part Austenitizing temp. HRC
                      Injection molds Compression/ transfer molds 1,870-1,885°F (1,020-1,030°C) 50-52
                      Tempering 480°F (250°C)

                        Other Applications

                        Applications Austenitizing temp HRC
                        Severe cold punching, scrap shears 1,870-1,885°F 50-52
                        (1,020-1,030°C)
                        Tempering 480°F (250°C)
                        Hot shearing 1,870-1,885°F
                        (1,020-1,030°C) 50-52
                        Tempering 480°F (250°C) or
                        1,070-1,110°F 45-50
                        (575-600°C)
                        Shrink rings (e.g. for cemented carbide dies) 1,870-1,885°F 45-50
                        (1,020-1,030°C)
                        Tempering 1,070-1,110°F
                        (575–600°C)
                        Wear-resisting parts 1,870-1,885°F Core
                        50-52
                        Surface
                        ~1000HV1
                        (1,020-1,030°C)
                        Tempering 1,070°F (575°C)
                        nitrided

                        If
                        there are any queries about AISI H13 tool steel for hot working
                        applications, please feel free to leave a comment below. And welcome
                        enquiry of AISI H13 tool steel, we are professional and reliable
                        supplier for prime H13 tool steel materials.


                      • Previous:
                      • Next:



  • Demonstration from Tycoon artist Robert Fernandez actively playing the Single Row Headed Wooden Tambourine with Brilliant Metal Jingles

    -Developed for greater playability in all musical scenarios
    -Chrome plated steel alloy jingles supply crisp chopping appears
    -Shells built of environmentally pleasant Siam Oak wood



    Moonar Stainless Steel Curved Blackhead Acne Clip Pimple Comedone Remover Face Cleaner Tool
    รายละเอียด : http://p2b.us/p8du5x

    คุณกำลังต้องการ Moonar Stainless Steel Curved Blackhead Acne Clip Pimple Comedone Remover Face Cleaner Tool เพื่อช่วยแก้ไขปัญหา อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีสินค้า ที่ท่านต้องการแนะนำ พร้อมมีแหล่งซื้อ สินค้าราคาถูก แนะนำให้ท่าน Moonar Stainless Steel Curved Blackhead Acne Clip Pimple Comedone Remover Face Cleaner Tool ราคาถูกให้กับคุณ

    ซื้อของออนไลน์เก็บเงินปลายทาง ส่งฟรี ของแท้ ของดี ราคาถูก Moonar Stainless Steel Curved Blackhead Acne Clip Pimple Comedone Remover Face Cleaner Tool Features: 100% brand new and high quality. Made of stainless steel durable and long time use. Curved design deeply remove your blackhead acne clip pimple comedone. Perfect tool for you to have a smooth face. Item type: blackhead remover Material: stainless steel Color: silver Length: 11cm/4.33 Quantity: 1pc ข้อมูลจำเพาะของ Moonar Stainless Steel Curved Blackhead Acne Clip Pimple Comedone Remover Face Cleaner Tool รายการสินค้าในกล่อง 1 x facial blackhead remover คุณสมบัติทั่วไปซื้อของออนไลน์เก็บเงินปลายทาง ส่งฟรี ของแท้ ของดี ราคาถูก MO213HBAA58QM8ANTH-11319998 โมเดล moonarstore-037*HJ4086A Size (cm) 18x14x2 Weight (kg) 0.01 ของแท้ ของดี ส่งฟรี เก็บเงินปลายทาง…

    หมวดหมู่ Skin-Care-Tools
    ราคา 63 บาท ถูกที่สุด

    สั่งซื้อพร้อมส่วนลด เก็บเงินปลายทาง http://p2b.us/p8du5x
    ———————————————————————————-
    คำค้นหา : Moonar, Stainless, Steel, Curved, Blackhead, Acne, Clip, Pimple, Comedone, Remover, Face, Cleaner, Tool, Moonar Stainless Steel Curved Blackhead Acne Clip Pimple Comedone Remover Face Cleaner Tool

    Moonar #Stainless #Steel #Curved #Blackhead #Acne #Clip #Pimple #Comedone #Remover #Face #Cleaner #Tool #Moonar Stainless Steel Curved Blackhead Acne Clip Pimple Comedone Remover Face Cleaner Tool

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree