China New Product H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel in Barcelona

China New Product 
 H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel in Barcelona

Short Description:

H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19. AISI H-13 tool steel is characterized by: Good resistance to abrasion at both low and high temperatures High level of toughness and ductility Uniform and high level of machinability and polishability Good high-temperature strength and resistance to t...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
    China New Product H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel in Barcelona, Welcome to build the well and long standing business relationships with our company to create a glorious future together .customers' satisfaction is our eternal pursuit


    H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.

    AISI H-13 tool steel is characterized by:

    • Good resistance to abrasion at both low and high temperatures

    • High level of toughness and ductility

    • Uniform and high level of machinability and polishability

    • Good high-temperature strength and resistance to thermal fatigue

    • Excellent through-hardening properties

    • Very limited distortion during hardening

    In
    steel H13, the molybdenum and vanadium act as strengthening agents. The
    chromium content assists die steel H-13 to resist softening when used
    at high temperatures. H-13 die steels offers an excellent combination of
    shock and abrasion resistance, and possesses good red hardness. It is
    capable of withstanding rapid cooling and resists premature heat
    checking. Tool Steel H13 has good machinability, good weldability, good
    ductility, and can be formed by conventional means.

    Due to H13
    tool steel excellent combination of high toughness and fatigue
    resistance, AISI H13 hot work tool steel is used more than any other
    tool steel in tooling applications.

    1. Common H13 Tool Steel Related Specifications

    Country USA German Japan
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404
    Grades H13 1.2344/X40CrMoV5-1 SKD61

    2. H13 Tool Steel Chemical Composition

    ASTM A681 C Mn P S Si Cr V Mo
    H13 0.32 0.45 0.2 0.6 0.03 0.03 0.8 1.25 4.75 5.5 0.8 1.2 1.1 1.75
    DIN ISO 4957 C Mn P S Si Cr V Mo
    1.2344 /X40CrMoV5-1 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.85 1.15 1.1 1.5
    JIS G4404 C Mn P S Si Cr V Mo
    SKD61 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.8 1.15 1.0 1.5

    3. AISI H13 Steel Mechanical Properties

    Properties

    Metric Imperial
    Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) 1200 – 1590 MPa 174000 – 231000 psi
    Tensile strength, yield (@20°C/68°F, varies with heat treatment) 1000 – 1380 MPa 145000 – 200000 psi
    Reduction of area (@20°C/68°F) 50.00% 50.00%
    Modulus of elasticity (@20°C/68°F) 215 GPa 31200 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30

    4. Forging of H13 Tool Steel
    Heating for forging must be done slowly and uniformly. Soak through at
    1900°-2000°F and reheat as often as necessary, stopping work when the
    temperature drops below 1650°F. After forging, cool slowly in lime,
    mica, dry ashes or furnace. H-13 should always be annealed after
    forging.

    5. Heat Treatment for H13 Tool Steels

    • Annealing

    Heat
    slowly to 1550°-1650°F, hold until entire mass is heated through, and
    cool slowly in the furnace (40F per hour) to about 1000°F, after which
    cooling rate may be increased. Suitable precautions must be taken to
    prevent excessive carburization or decarburization.

    • Stress Relieving

    When
    desirable to relieve the strains of machining, heat slowly to
    1050°-1250°F, allow to equalize, and then cool in still air (Strain
    Relieving). Â

    • Preheat Prior to Hardening

    Warm slightly before charging into the preheat furnace, which should be operating at 1400°-1500°F.

    • Hardening

    H13
    tool steel is a steel having very high hardenability and should be
    hardened by cooling in still air. The use of a salt bath or controlled
    atmosphere furnace is desirable to minimize decarburization, and if not
    available, pack hardening in spent pitch coke is suggested. The
    temperature employed is usually 1800°-1850°F, depending on size section.

    • Quenching

    Quench
    in still air or dry air blast. If complicated forms are to be hardened,
    an interrupted oil quench can be used. Quench part in oil and remove
    from bath when it just loses its color (1000°-1100°F). Finish cooling to
    below 150°-125°F in air, then temper immediately.

    • Tempering

    Tempering
    practice may vary with size and application, but is usually performed
    in the range of maximum secondary hardness or higher. Double tempering
    is recommended. The results below is H13 that was air quenched from
    1800°F and tempered for 4 hours at various temperatures. The results may
    be used as a guide, keeping in mind that parts of heavy section or mass
    may be several points lower in hardness.

    6. Application of AISI H13 Tool Steel

    • As Tools for Extrusion

    Part Aluminium, mag­nesium alloys, HRC Copper al­loys HRC Stainless steel HRC
    Dies, Backers, die-holders, liners, dummy blocks, stems 44-50 43-47 45-50
    41-50 40-48 40-48

    Austenitizing temperature

    1,870-1,885°F 1,900-1,920°F
    (1,020-1,030°C) (1,040-1,050°C)
    • As Plastic Molding Tool Steel

    Part Austenitizing temp. HRC
    Injection molds Compression/ transfer molds 1,870-1,885°F (1,020-1,030°C) 50-52
    Tempering 480°F (250°C)
    • Other Applications

    Applications Austenitizing temp HRC
    Severe cold punching, scrap shears 1,870-1,885°F 50-52
    (1,020-1,030°C)
    Tempering 480°F (250°C)
    Hot shearing 1,870-1,885°F
    (1,020-1,030°C) 50-52
    Tempering 480°F (250°C) or
    1,070-1,110°F 45-50
    (575-600°C)
    Shrink rings (e.g. for cemented carbide dies) 1,870-1,885°F 45-50
    (1,020-1,030°C)
    Tempering 1,070-1,110°F
    (575–600°C)
    Wear-resisting parts 1,870-1,885°F Core
    50-52
    Surface
    ~1000HV1
    (1,020-1,030°C)
    Tempering 1,070°F (575°C)
    nitrided

     

    If
    there are any queries about AISI H13 tool steel for hot working
    applications, please feel free to leave a comment below. And welcome
    enquiry of AISI H13 tool steel, we are professional and reliable
    supplier  for prime H13 tool steel materials.

  • Previous:
  • Next:



  • My second channel for unboxings, product reviews and travel vlogs: http://bit.ly/21QMD7z
    Chocolate chip popcorn bars video: http://bit.ly/2c538Xb

    Brownie layer:
    1/2 cup butter at room temperature
    1 cup granulated white sugar
    1/3 cup brown sugar packed
    2 eggs
    2 tsp vanilla extract
    3/4 cup all purpose flour
    1/2 cup unsweetened cocoa powder
    1/4 tsp salt (omit if using salted butter)

    Cookie Layer:
    1/2 cup butter at room temperature
    3/4 cup pack brown sugar
    2 tbsp white granulated sugar
    1 large egg
    1 tsp vanilla extract
    1 1/2 cups all purpose flour
    1/2 tsp baking soda
    1/2 tsp salt (reduce to 1/4 tsp if using salted butter)
    1 cup chocolate chips

    Cereal Treat layer
    3 tbsp butter
    1-10oz bag mini marshmallows
    4 cups rice cereal

    Brownie layer instructions:
    Beat the butter, white sugar & brown sugar until light and fluffy.
    Add the eggs and the vanilla and mix until combined.
    Blend in the cocoa and flour (and salt if using).
    Spread into the bottom of a 9×9″ or 8×10″ pan that has been well greased or lined with aluminum foil (foil greased too).

    Cookie layer instructions:
    Beat the butter and the sugar (white and brown) together until light and fluffy.
    Add the egg and vanilla and mix until combined.
    Mix in the flour, baking soda and salt (if using).
    Stir in chocolate chips.
    Spoon chocolate chip cookie batter over the brownie batter. Spread it out evenly being careful not to push it down into the brownie batter.
    Bake at 325F for 30-40 minutes (I used a glass pan and mine took about 45 minutes) until toothpick inserted in center comes out clean.
    Let cool.

    For Rice Krispie layer:
    Melt the butter and marshmallows together (on stove on low or in bowl in microwave).
    Stir and then add in the cereal. Stir until cereal is coated.
    Spread the mixture while still warm over the cookie layer.
    Allow to cool and slice into squares.

    Recipe found in a Food Network Magazine (Sept. 2016 edition).

    INFO ABOUT ME :)

    My name is Tammy and I live in Northeastern Ontario Canada. I am a married, full-time working mom of one teenaged son.

    Contact me here:

    http://bit.ly/1QvU1Nn

    Facebook

    http://on.fb.me/1p9sV5W

    Pinterest

    http://pinterest.com/yoyomax12

    Twitter:

    https://twitter.com/YoyomaxTwelve

    Instagram:

    http://instagram.com/yoyomaxtwelve

    I LOVE comments and I read each and every one of them.

    I try very hard to answer questions when I can, but there is an excellent chance your question has been answered in the description box or in the comments, so please take a look.

    My favourite channel here on YouTube is CookingAndCrafting. Beth lives in Hawaii and makes great meals, desserts and crafts. We met here on YouTube by commenting on each others videos and have since met each other several times in “real life”. She is a lovely person and a great friend. Please check her out :) http://bit.ly/1TClroH



    Ray Bradbury’s best-selling science fiction masterpiece about a future without books takes on a chillingly realistic dimension in this film classic directed by one of the most important screen innovators of all time, the late François Truffaut . Julie Christie stars in the challenging dual role of Oskar Werner’s pleasure-seeking conformist wife, Linda, and his rebellious, book-collecting mistress, Clarisse. Montag (Oskar Werner), a regimented fireman in charge of burning the forbidden volumes, meets a revolutionary school teacher who dares to read. Suddenly he finds himself a hunted fugitive, forced to choose not only between two women, but between personal safety and intellectual freedom. Truffaut’s first English language production is an eerie fable where mankind becomes the ultimate evil. 1966 Universal Studios. All Rights Reserved.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key