China Manufacturer for M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory from Dominican Republic
AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2 is a medium alloyed high speed steel which has good machinability. The H-SS M2 chemical composition gives a good combination of well-balanced toughness, wear resistance and red hardness properties. Widely used for cutting tools such as twist drills, taps, milling cutters, saws, knives etc. Also commonly used in cold work punches and dies and cutting applications involving high speed...
owing to good service, a variety of high quality products, competitive prices and efficient delivery, we enjoy a good reputation among our customers. We are an energetic company with wide market for China Manufacturer for M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory from Dominican Republic, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now
is a medium alloyed high speed steel which has good machinability. The
H-SS M2 chemical composition gives a good combination of well-balanced
toughness, wear resistance and red hardness properties. Widely used for
cutting tools such as twist drills, taps, milling cutters, saws, knives
etc. Also commonly used in cold work punches and dies and cutting
applications involving high speed and light cuts.
Grade M2 High Speed Steel is by far the most popular high speed steel replacing high speed steel gradein most applications because of its superior properties and relative economy.
1. Common M2 Tool Steel Related Specifications and Equivalents
2. ASTM M2 Tool Steel Chemical Composition Properties
|M2 regular C||0.78||0.88||0.15||0.40||0.03||0.03||0.20||0.45||3.75||4.50||1.75||2.20||4.50||5.50||5.50||6.75|
|DIN ISO 4957||C||Mn||P||S||Si||Cr||V||Mo||W|
3. AISI HSS M2 Tool Steel Mechanical Properties
Physical Properties of HSS M2 Material
|Density||0.294 lb/in3 (8138 kg/m3)|
|Modulus of Elasticity||0.294 lb/in3 (8138 kg/m3)|
|Thermal conductivity||24 Btu/ft/hr/°F 41.5 W/m/°K|
|Machinability||65% of a 1% carbon steel|
AISI M2 Tool Steels Properties Mechanical
|Hardness, Rockwell C (tempered at 1150°F, quenched at 2200°F)||62||62|
|Hardness, Rockwell C (as hardened, quenched at 2200°F)||65||65|
|Compressive yield strength (when tempered at 300°F)||3250 MPa||471000 psi|
|Izod impact unnotched (when tempered at 300°F)||67 J||49.4 ft-lb|
|Abrasion (loss in mm3, as-hardened; ASTM G65)||25.8||25.8|
|Abrasion (loss in mm3, tempered at 1275°F; ASTM G65)||77.7||77.7|
|Elastic modulus||190-210 GPa||27557-30458 ksi|
M2 Steels Thermal Properties
|CTE, linear (@20.0 – 100°C/ 68.0 – 212°F)||10 μm/m°C||5.56 μin/in°F|
|CTE, linear (@20.0 – 500°C/68.0 – 932°F)||12.2 μm/m°C||6.78 μin/in°F|
|CTE, linear (@20.0 – 850°C/68.0 – 1560°F)||12.6 μm/m°C||7 μin/in°F|
4. Forging of AISI M2 High Speed Steel
heat M2 HSS steel slowly and uniformly to 850-900°C. The heat should
then be increased more quickly to the forging temperature of
1050-1150°C. If during the forging
the temperature of the M2 high speed tool steel material drops below
880-900°C, re-heating will be necessary. Cool the M2 steel component
very slowly after forging.
5. Heat Treatment of M2 Steel HSS
to 1600° F, soak thoroughly at heat. Furnace cool 25° F per hour to
900° F, air cool to room temperature. Approximate annealed hardness 241
Stress Relief of Unhardened Material: Heat slowly
to 1200 to 1250° F. Soak for two hours per inch of thickness at heat.
Slow cool (furnace cool if possible) to room temperature.
Preheat: Heat slowly to 1550° F, soak thoroughly, heat to 1850° F, soak thoroughly.
time in the furnace varies from a few minutes to a 15 minutes,
depending tool size, heat capacity of the furnace, and the size of the
charge. – Heat to 2150 to 2200° F for max. toughness and minimum
distortion. – Heat to 2250 to 2275° F for max. hardness and abrasion
hardness, oil quench to 150-200° F. Air quench to 150° F. When quenching
in hot salt maintain the quench just above the Ms temperature. After
equalizing withdraw parts from the hot salt and air cooled to 150° F.
temper is mandatory, three tempers are sometimes preferred. Soak for 2
hours per inch of thickness. Air cool to room temperature between
tempers. The best tempering range for hardness, strength and toughness
is 1000 to 1050° F.
|Temper° F||Rockwell “C”||Temper° F||Rockwell “C”|
6. Machinability of AISI M2 Tool Steel H-SS
of HSS M2 tool steels can be carried out using grinding methods.
However, they have poor grinding capability and hence they are regarded
as “medium” machinability tool steel under annealed conditions. The
machinability of these tool steels M2 is only 50% of that of the easily
machinable W group or water hardening tool steels.
7. M2 Tool Steel Applications
The main use of high-speed steels continues to be in the manufacture of various cutting tools.
applications for M2 high speed steel are twist drills, reamers,
broaching tools, taps, milling tools, metal saws. M2 is suitable for
cold forming tools such as extrusion rams and dies, also widely used in
all kinds of cutting tools, knife and punches and die applications,
plastic moulds with elevated wear resistance and screws.
Raci (www.raci.it) is an Italian manufacturing company producing valves and accessories for waterworks and spacers for pipelines.
We started in 1952 and we have always manufactured products that require little maintenance and are long lasting, keeping in mind that a second dig in the ground to repair a valve is more expensive than a good product.
Raci manufacture various waterwork valves (gates, service, butterfly, air, check, non return valves),
hydrants, pipe saddles, flanges and connectors and related accessories.
Open this link to browse our product specisifications : bit.ly/1zTC45L
Raci manufactures various hydrants, one of them is :
The BREAKAWAY SYSTEM HYDRANT, with special features :
( also check : bit.ly/1zTC45L )
• Proper screwed connection between head and column with
prearranged breaking section.
• The breakaway system to avoid the water losses in case of
accidental break of hydrant by an impact with separation of
hydrant head from its column.
• According to the requirements of EN 14384 type C & EN 1074-6.
• Generously oversized column for high water capacity.
• Plug fully rubber vulcanised with special O-ring profile for soft
lateral sealing without high compression of any rubber.
• Hydrant head, column and base high quality EPOXY powder
coated (fusion bonded), UV deterioration resistant.
• Multiple O-ring spindle sealing system embedded in non-
corrosive material to DIN 3547-1.
• Stainless steel spindle ( single forged round bar with rolled
• Gliding disc on the spindle neck to reduce friction when operating
• Sealing seat from stainless steel cylinder replaceable deeply
corrosion and lamination resistant.
• Automatic drainage system at closed position of the plug.
• Routable flange at hydrant inlet for easy positioning.
• Marking according to EN 19.
• Outlet couplings (hose connections) and operating caps
according to various standards possible, according to the
following combinations 2 x 2” + 1 x 2 1/2”; 2 x 2’ 1/2”; 2 x 2 1/2”
+ 1 x 4”.
• Possibility for mounting customized indicator plate ( name, logo,
• Suitable complete with 90° duckfoot bend.
For all our hydrant products, kindly refer to : bit.ly/1sahgmU
Our company brochure can be downloaded from : bit.ly/1wmEhD8
For further information, please contact us :
Georgina Mieke : firstname.lastname@example.org
Mobile/Whatsapps: +62 819 0823 5490
Giulio A. Gessner : email@example.com
Raci SEA Reps Office:
Sampoerna Strategic Square Level 30 South Tower
Jl. Jend Sudirman Kav 45-46, Jakarta 12930 – Indonesia
Raci Headquarter :
Via Adriano 101, 20128 Milano, Italy
Phone : +39 02 262351
Check out how to watch the special concert on your computer or mobile device.
Concert Zone Site Will air an Julien Baker Special Show Perfomance at Brooklyn Steel, Brooklyn, NY, US
You must be logged in to continue streaming.
Live On :::: http://today.live4stream.com/Julien-Baker-at-Brooklyn-Steel,-Brooklyn,-NY,-US-April-19-2017-/tq-Bp_2FOGA (Live stream will be available after Login)
Julien Baker Brooklyn Steel, Brooklyn, NY, US April 19 2017
Julien Baker Concert review and setlist
watch Julien Baker in Brooklyn Steel, Brooklyn, NY, US Live stream airs Tonight Online
Julien Baker Concert in Brooklyn Steel, Brooklyn, NY, US April 19 2017
Missed Julien Baker Concert?? , is now available to stream full.
Exclusive Julien Baker LIVE 2017 – Show – Live at Brooklyn Steel, Brooklyn, NY, US .
Julien Baker LIVE 2017 Brooklyn Steel, Brooklyn, NY, US – April 19 2017 at Brooklyn Steel, Brooklyn, NY, US
Global Superstar Julien Baker Will visit Brooklyn Steel, Brooklyn, NY, US For the Tour Concert in April 19 2017
Watch Julien Baker Live 2017 streaming at Brooklyn Steel, Brooklyn, NY, US for April 19 2017
Julien Baker Ticket Now available on ConcertZone , Worlds largest live streaming concert online
Live concertZone can now confirm that Julien Baker will concert at Brooklyn Steel, Brooklyn, NY, US on April 19 2017
Get the Julien Baker setlist of the concert at Brooklyn Steel, Brooklyn, NY, US on April 19 2017
En Vivo | Ao Vivo | In Direct