China Factory for M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 in Monaco

China Factory for
 M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 in Monaco

Short Description:

AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2 is a medium alloyed high speed steel which has good machinability. The H-SS M2 chemical composition gives a good combination of well-balanced toughness, wear resistance and red hardness properties. Widely used for cutting tools such as twist drills, taps, milling cutters, saws, knives etc. Also commonly used in cold work punches and dies and cutting applications involving high speed...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of China Factory for M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 in Monaco, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.


    AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2
    is a medium alloyed high speed steel which has good machinability. The
    H-SS M2 chemical composition gives a good combination of well-balanced
    toughness, wear resistance and red hardness properties. Widely used for
    cutting tools such as twist drills, taps, milling cutters, saws, knives
    etc. Also commonly used in cold work punches and dies and cutting
    applications involving high speed and light cuts.

    Grade M2 High Speed Steel is by far the most popular high speed steel replacing high speed steel grade T1 in most applications because of its superior properties and relative economy.

    1. Common M2 Tool Steel Related Specifications and Equivalents

    Country USA German Japan
    Standard ASTM A600 DIN EN ISO 4957 JIS G4403
    Grades M2 1.3343 SKH51

    2. ASTM M2 Tool Steel Chemical Composition Properties

    ASTM A600 C Mn P S Si Cr V Mo W
    M2 regular C 0.78 0.88 0.15 0.40 0.03 0.03 0.20 0.45 3.75 4.50 1.75 2.20 4.50 5.50 5.50 6.75
    DIN ISO 4957 C Mn P S Si Cr V Mo W
    1.3343 0.86 0.94 0.45 3.80 4.50 1.70 2.10 4.70 5.20 5.90 6.70
    JIS G4403 C Mn P S Si Cr V Mo W
    SKH51 0.80 0.88 0.40 0.03 0.03 0.45 3.80 4.50 1.70 2.10 4.70 5.20 5.90 6.70

    3. AISI HSS M2 Tool Steel Mechanical Properties

    • Physical Properties of HSS M2 Material

    Density         0.294 lb/in3 (8138 kg/m3)
    Specific Gravity                  8.15
    Modulus of Elasticity         0.294 lb/in3 (8138 kg/m3)
    Thermal conductivity         24 Btu/ft/hr/°F  41.5 W/m/°K
    Machinability          65% of a 1% carbon steel
    • AISI M2 Tool Steels Properties Mechanical

    Mechanical properties Metric Imperial
    Hardness, Rockwell C (tempered at 1150°F, quenched at 2200°F) 62 62
    Hardness, Rockwell C (as hardened, quenched at 2200°F) 65 65
    Compressive yield strength (when tempered at 300°F) 3250 MPa 471000 psi
    Izod impact unnotched (when tempered at 300°F) 67 J 49.4 ft-lb
    Abrasion (loss in mm3, as-hardened; ASTM G65) 25.8 25.8
    Abrasion (loss in mm3, tempered at 1275°F; ASTM G65) 77.7 77.7
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Elastic modulus 190-210 GPa 27557-30458 ksi
    • M2 Steels Thermal Properties

    Thermal properties Metric Imperial
    CTE, linear (@20.0 – 100°C/ 68.0 – 212°F) 10 μm/m°C 5.56 μin/in°F
    CTE, linear (@20.0 – 500°C/68.0 – 932°F) 12.2 μm/m°C 6.78 μin/in°F
    CTE, linear (@20.0 – 850°C/68.0 – 1560°F) 12.6 μm/m°C 7 μin/in°F

    4. Forging of AISI M2 High Speed Steel

    Pre
    heat M2 HSS steel slowly and uniformly to 850-900°C. The heat should
    then be increased more quickly to the forging temperature of
    1050-1150°C. If during the forging
    the temperature of the M2 high speed tool steel material drops below
    880-900°C, re-heating will be necessary. Cool the M2 steel component
    very slowly after forging.

    5. Heat Treatment of M2 Steel HSS

    • Anneal

    Heat
    to 1600° F, soak thoroughly at heat. Furnace cool 25° F per hour to
    900° F, air cool to room temperature. Approximate annealed hardness 241
    Maximum Brinell.

    Stress Relief of Unhardened Material: Heat slowly
    to 1200 to 1250° F. Soak for two hours per inch of thickness at heat.
    Slow cool (furnace cool if possible) to room temperature.

    • Hardening

    Preheat: Heat slowly to 1550° F, soak thoroughly, heat to 1850° F, soak thoroughly.

    • Harden

    Soak
    time in the furnace varies from a few minutes to a 15 minutes,
    depending tool size, heat capacity of the furnace, and the size of the
    charge. – Heat to 2150 to 2200° F for max. toughness and minimum
    distortion. – Heat to 2250 to 2275° F for max. hardness and abrasion
    resistance.

    • Quench

    For full
    hardness, oil quench to 150-200° F. Air quench to 150° F. When quenching
    in hot salt maintain the quench just above the Ms temperature. After
    equalizing withdraw parts from the hot salt and air cooled to 150° F.

    • Temper

    Double
    temper is mandatory, three tempers are sometimes preferred. Soak for 2
    hours per inch of thickness. Air cool to room temperature between
    tempers. The best tempering range for hardness, strength and toughness
    is 1000 to 1050° F.

    Temper° F Rockwell “C” Temper° F Rockwell “C”
    As-quenched 64 900 64
    400 63 1000 65.5
    500 62.5 1050 63.5
    600 62.5 1100 61.5
    700 62.5 1150 60
    800 63.5 1200 53

    6. Machinability of AISI M2 Tool Steel H-SS

    Shaping
    of HSS M2 tool steels can be carried out using grinding methods.
    However, they have poor grinding capability and hence they are regarded
    as “medium” machinability tool steel under annealed conditions. The
    machinability of these tool steels M2 is only 50% of that of the easily
    machinable W group or water hardening tool steels.

    7. M2 Tool Steel Applications

    The main use of high-speed steels continues to be in the manufacture of various cutting tools.

    Typical
    applications for M2 high speed steel are twist drills, reamers,
    broaching tools, taps, milling tools, metal saws. M2 is suitable for
    cold forming tools such as extrusion rams and dies, also widely used in
    all kinds of cutting tools, knife and punches and die applications,
    plastic moulds with elevated wear resistance and screws.

  • Previous:
  • Next:



  • If you’re looking for Top Laser Cutting Services in Dubai – UAE, then you are in the right place!
    Contact Contact Us Now: +971 04 321 9366 | email: laser@lasercraft.ae

    http://lasercraft.ae

    laser cnc custom fabrication dubai – ‘s Hans Laser and Hans GS laser cutting machine for sheet metal brochure on DirectIndustry
    You can Online Wholesale 500w mild steel laser cutting machine,Wholesale Home Improvement,Wood Router, and more on Aliexpress Laser Cutting by AAE, a Dubai based manufacturing specialist supplying high-grade steel across the UAE
    Gold Coast Laser Cutting & Plastic Fabrication Pty Ltd · Plastics Products Manufacturers & Wholesalers – Molendinar, QLD To meet diverse requirements of our prestigious clients, we are engaged in providing an excellent range of IPG Laser Cutting Machine for Metal
    Perfect Laser Large Scale Sheet Metal 1mm Stainless Steel Laser Cutting Machine with Low Price · Perfect Laser (Wuhan) Co
    2 kW CO2 laser with a 2 kW fiber laser cutting machine
    Laser Cut Figures by Laser Cutting on Acrylic
    Laser cutting machine working from Tk 4,50000 CNC CO2 Laser · CNC Laser Cutting Machine · CNC Laser Engraving Machine

    2015 Best Price 2KW CNC Fiber Laser Cutting Machine for Sheet Metal · 2015 Best Price 2KW CNC Fiber Laser Cutting Machine for Sheet Metal Fast cnc fiber 6mm mild steel laser cutting machine 1000w · Jinan Finework CNC Machinery Co

    As a manufacturer of CO2 laser cutting machines with output power from 2

    Gold Coast Laser Cutting in Ormeau, QLD, 4208

    Tirth Corporation offering IPG Laser Cutting Machine For Metal in Rajkot, Gujarat

    Stainless steel laser cutting machine 300W
    Discover the all-around performing LVD Phoenix FL fiber laser cutting machine
    We provide CO2 laser cutting on acrylic, timber, plastics and fibrous materials

    We now have 8 ads from 13 sites for laser cutting machine working, under machinery & construction Find and save ideas about Cnc laser cutting machine on Pinterest, the world’s catalog of ideas
    HECF3015iT-500 Fiber Combined Laser Cutting Machine for Sheet Metal and TubesMain Characters 1
    1000W CNC 3000x1500mm working area 10mm mild steel laser cutting machine with USA IPG Laser Source · 1000W CNC 3000x1500mm working area Laser cutting and laser drilling Gold Coast Laser Cutting & Plastic Fabrication Pty Ltd – Plastics Products Manufacturers And Wholesalers in Molendinar (Queensland), Australia

    Good Quality Tube CNC Laser Metal Cutting Machine / Fiber IPG Laser Cutting Machine From China – Wuhan Hans Goldensky Laser System Co NEW LIT LASER 500W FIBER LASER CUTTING MACHINE
    Analysis of Surface Roughness for Laser Cutting on Acrylic Sheets using Response Surface Method View Stock Photo of Laser Cutting Machine Working In Factory
    Lasertex CNC Laser Cutting Machine Laser Cutting



    “FD Grip” The No.1 earthquake-resistant rebar coupler in Japan, the highest seismic country, for over 30 years.

    http://www.fujibolt.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star