China Factory for C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C in Muscat

China Factory for
 C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C in Muscat

Short Description:

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suita...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    continue to improve, to ensure product quality in line with market and customer standard requirements. Our company has a quality assurance system have been established for China Factory for C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C in Muscat, Adhering to the business principle of mutual benefits, we have won good reputation among our customers because of our perfect services, quality products and competitive prices. We warmly welcome customers from home and abroad to cooperate with us for common success.


    Steel C45 Round Bar is
    an unalloyed medium carbon steel, which is also a general carbon
    engineering steel. C45 is a medium strength steel with good
    machinability and excellent tensile properties. C45 round steel is
    generally supplied in the black hot rolled or occasionally in the
    normalised condition, with a typical tensile strength range 570 – 700
    Mpa and Brinell hardness range 170 – 210 in either condition. It does
    not however respond satisfactorily to nitriding due to a lack of
    suitable alloying elements.

    C45 round bar steel is equivalent to EN8 or 080M40.
    Steel C45 bar or plate is suitable for the manufacture of parts such as
    gears, bolts, general-purpose axles and shafts, keys and studs.

    1. Supply Range of Steel C45 Round Bar

    • C45 Steel Round Bar: diameter 8mm – 3000mm

    • C45 Steel Plate: thickness 10mm – 1500mm  x width 200mm – 3000mm

    • C45 Steel Flat Bar: 200mm – 1000mm

    • Square C45 Steel: 20mm-800mm

    • Hexagon Steel.

    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. Common C45 Steel Specifications

    Country USA British Japan Australia
    Standard ASTM A29 EN 10083-2 JIS G4051 AS 1442
    Grades 1045 C45/1.1191 S45C 1045

    3. C45 Round Bar Steel Chemical Composition Properties

    Standard Grade C Mn P S Si Ni Cr
    ASTM A29 1045 0.43-0.50 0.60-0.90 0.04 0.050  -  -  -
    EN 10083-2 C45/1.1191 0.42-0.50 0.50-0.90 0.03 0.035 0.04 0.4 0.4
    JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35  -  -

    4. Mechanical Properties of C45 Round Bar Steel Material

    • Mechanical Properties in Quenched+Tempered Condition

    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5 (%) Reduction Z (%)
    <16 <8 min. 490 700-850 min. 14 min. 35
    <17-40 <8<=20 min. 430 650-800 min. 16 min. 40
    <41-100 <20<=60 min. 370 630-780 min. 17 min. 45
    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5(%)
    <16 <16 min. 390 min. 620 min. 14
    <17-100 <16<=100 min. 305 min. 305 min. 16
    <101-250 <100<250 min. 275 min. 560 min. 16

    5. Forging of Carbon Steel C45 Round Bar

    Hot forming temperature: 850-1200oC.

    Pre
    heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC
    maximum, hold until temperature is uniform throughout the section and
    commence forging immediately. Forging is not workable below 850 oC.
    Finished forgings could be air cooled.

    We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.

    6. DIN C45 Round Bar Steel Grade Heat Treatment

    Forging or hot rolling: 1100 – 850°C
    Normalising:  840 – 880°C/air
    Soft annealing:  680 – 710°C/furnace
    Hardening:  820 – 860°C/water, oil
    Tempering:  550 – 660°C/air

    7. Hardening of DIN C45 Steel Hardening

    Harden from a temperature of 820-860oC followed by water or oil quenching.

    Heat
    to 820 oC – 850 oC hold until temperature is uniform throughout the
    section, soak for 10 – 15 minutes per 25mm of section, and quench in
    water or brine. Or,

    Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.

    Surface hardness for C45 special steel round bar after flame or induction hardning:

    • Steel Name       Steel number          Surface Harndess

    • C45                        1.1191                        min. 55 HRC

    8. Application of DIN Carbon Steel C45 Round Bar

    DIN
    C45 round bar steel material and steel plate C45, flats are widely used
    in all industry for uses which require more strength and wear
    resistance than the low carbon mild steel.

    Quenched and
    subsequently tempered steel for C45 steel grade round bar, steel plate,
    flat and square is used for axles, bolts, forged connecting rods,
    crankshafts, torsion bars, light gears, guide rods, screws, forgings,
    wheel tyres, shafts, sickles, axes, knives, wood working drills,
    hammers, etc.

    Welcome customers to inquiry DIN C45 round bar,
    CK45/1.1191 steel plate, flat steel for C45 steel price. We are
    professional supplier and exporter for more than 20 years. We offer you
    worldwide solution for C45 round bar steel.

  • Previous:
  • Next:



  • Rosey Steel Rule Die Company – Steel Rule Dies, Waterjet, Laser Engraving & More. 1704 Waring Rd.
    Dalton, GA 30721. 706-278-3036 Email: rsrdco@roseysteelruledie.com Web: www.roseysteelruledie.com



    For more info on my hunting, camping and survival knives visit my website: http://store.goughcustom.com/

    Making a prototype bushcraft/camping knife using only simple tools. The blade is made from O1 tool steel, the handle is made from brown Micarta.

    For more information check out http://goughcustom.com/

    Regarding the sanding block: lots of people asked about the sanding block I’m using, so I made a video about it here: http://www.youtube.com/watch?v=AtAZRdxUrh4

    If you’re looking at getting into knifemaking, here is a rough list of the tools/materials you would use to make something similar to this knife:

    Materials:
    O1 Tool Steel: http://amzn.to/1vF0nSo
    O1 Drill Rod (for pins): http://amzn.to/1yKklfH
    Micarta: http://amzn.to/1waT4zt
    Epoxy: http://amzn.to/1yKpbcP

    Tools:
    Layout dye: http://amzn.to/1nssZLN
    Hacksaw: http://amzn.to/1wdTNPo
    Hacksaw blades (10″, 24TPI): http://amzn.to/1oesHbU
    Small C clamps: http://amzn.to/1yKl1li
    Scribe: http://amzn.to/1wdUeth
    Transfer Punches: http://amzn.to/1DiLfen
    4″ Vise: http://amzn.to/1wiFcEp
    12″ Double cut bastard file: http://amzn.to/1vnN8nw
    10″ half round bastard file: http://amzn.to/1vnNivi
    OR File set: http://amzn.to/1DiLWnP
    Hammer: http://amzn.to/1vnNSZT
    Milwaukeee M12 drill: http://amzn.to/1rIs8BT
    ‘F’ clamps: http://amzn.to/1wiGIX8
    Sandpaper: http://amzn.to/1wdVblg
    Fine Sandpaper: http://amzn.to/104jgBc
    Bernzomatic MAPP torch: http://amzn.to/1wiHkvS
    Channel Locks: http://amzn.to/1DiN9vw
    Toaster oven (or use home oven): http://amzn.to/1rIuhO2
    Masking tape: http://amzn.to/1sXm0vc
    Pliers: http://amzn.to/1CwL6BN

    Tools to make:
    2 Brick forge: http://www.bladeforums.com/forums/showthread.php/920120-Virtual-BBQ-2-Brick-Forge-WIP
    (K23 firebricks for 2 brick forge, you can get these cheaper locally): http://amzn.to/1waUvhl
    Filing Jig: https://www.youtube.com/watch?v=r9iNDRwwBQQ

    Thanks for watching!
    -Aaron

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star