China Cheap price AISI 1053 Carbon Steel (UNS G10530) Factory for Liberia
Chemical Composition The chemical composition of AISI 1053 carbon steel is outlined in the following table. Element Content (%) Iron, Fe 98.36-98.82 Manganese, Mn 0.7-1.0 Carbon, C 0.48-0.55 Sulfur, S 0.05 Phosphorous, P 0.04 Physical Properties The physical properties of AISI 1053 carbon steel are tabulated below. Properties Metric Imperial Density 7.7-8.03 g/cm3 0.278-0.290 l...
Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for China Cheap price AISI 1053 Carbon Steel (UNS G10530) Factory for Liberia, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
The chemical composition of AISI 1053 carbon steel is outlined in the following table.
The physical properties of AISI 1053 carbon steel are tabulated below.
|Density||7.7-8.03 g/cm3||0.278-0.290 lb/in3|
The following table shows mechanical properties of AISI 1053 carbon steel.
|Elastic modulus||190-210 GPa||29700-30458 ksi|
The Wacky Brand Pollen Press is 100% 304 Stainless Steel, Don’t waste your time with Aluminum presses that break and can leave aluminum shavings in your hash. This press is 3.5 inches tall and creates pucks with a diameter of 19.90 mm. approximately the size of a nickel. Create wafers of 0.02g or cylinders up to 4 grams and 1 in tall. Built to withstand the repetitive heating and cranking this Press combines quality with affordability.
100% Food Grade Stainless Steel – NO ALUMINUM PARTS
Dishwasher Safe and Heat Resistant
Diamond Cut detail on the top and bottom caps provide superior grip
The pieces have been machined to fit together with 1/10th mm clearance
Better Threading for increased strength and durability
Reinforced Cylinder wall
Imprint your pucks by adding one of our 19.90 mm Stamps to your order
Unscrew top threads and remove rod
(you can also fill the cylinder by unthreading the bottom cap backing off the handle and removing the weight )
Insert desired amount of bubble or keif
Insert rod and thread top cap
Turn handle until it stops
Use portable heater to heat press
Turn handle (about 1/4 turn)
Apply more heat (between 30 sec and 60 sec)
Repeat (the more heat and pressure applied the darker the puck will be )
To remove puck unthread bottom cap remove weight and turn handle until the puck can be removed
Disassemble all parts
Clean with hot water and dish soap
Allow to DRY COMPLETELY before reassembly and storage
hier kommt ihr zu meiner Vorstellug zum Real Steel H6:
Hier könnt ihr es beziehen:
old school mix
by Renegade Master