Cheapest Price L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Factory in luzern

Cheapest Price 
 L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Factory in luzern

Short Description:

In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel is in the general class of alloy, oil-hardening tool steel that is characterized by good toughness. ASTM L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness. Due to its lower carbon content and relatively high nickel content, L6 tool steel has slightly better shock-resistance than more highly alloyed types and shoul...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. Cheapest Price L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Factory in luzern, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.


    In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel
    is in the general class of alloy, oil-hardening tool steel that is
    characterized by good toughness. ASTM L6 tool steel is suitable for use
    as tools, dies, and machine parts, which require a good combination of
    hardness and toughness.

    Due to its lower carbon content and
    relatively high nickel content, L6 tool steel has slightly better
    shock-resistance than more highly alloyed types and should be used where
    some wear-resistance can be sacrificed for increased toughness.

    1. Relevant Steel Specification of L6 Tool Steel

    Country USA German Japan British
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404 BS 4659
    Grades L6/T61206 1.2714/55NiCrMoV7 SKT4 BH224/5

    2. AISI L6 Steel Chemical Composition and Steel Equivalents

    ASTM A681 C Mn P S Si Cr V Mo Ni
    L6/T61206 0.65 0.75 0.25 0.80 0.03 0.03 0.10 0.50 0.60 1.20 . . . . . . . . . 0.50 1.25 2.00
    DIN ISO 4957 C Mn P S Si Cr V Mo Ni
    1.2714/55NiCrMoV7 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    JIS G4404 C Mn P S Si Cr V Mo Ni
    SKT4 0.50 0.60 0.60 0.90 0.03 0.02 0.10 0.40 0.80 1.20 0.05 0.15 0.35 0.55 1.50 1.80
    BS 4659 C Mn P S Si Cr V Mo Ni
    BH224/5 0.49 0.57 0.70 1.00 0.03 0.025 . . . 0.35 0.70 1.10 . . . . . . 0.25 0.40 1.25 1.80

    3. ASTM L6 Tool Steel Mechanical Properties

    Steel L6 Physical Properties

    • Modulus of elasticity [103 x N/mm2]: 215

    • Density [g/cm3]: 7.84

    • Thermal conductivity [W/m.K]: 36.0

    • Electric resistivity [Ohm mm2/m]: 0.30

    • Specific heat capacity[J/g.K]: 0.46

    Mechanical Properties of L6 Steels

    Properties Metric Imperial
    Poisson’s ratio 0.27- 0.30 0.27- 0.30
    Elastic modulus 190-210 GPa 27557-30457 ksi

    4. Forging of L6 Tool Steel

    Forge at 1079°C (1975 F) down to 871°C (1600 F). Do not forge below 843°C (1550 F).

    5. AISI L6 Tool Steel Heat Treatment

    Hardening

    Preheating:
    Heat steel L6 at a rate not exceeding 204°C (400°F) per hour (222°C per
    hour) to 621-677°C (1150-1250°F) and equalize. Soak for 30 minutes for
    the first inch (25.4 mm) of thickness, plus 15 minutes for each
    additional inch (25.4 mm).

    Quenching

    Quench L6 tool steel in oil to 66-51°C (150-125°F).

    Tempering

    Temper
    L6 steels immediately after quenching. Hold at temperature for 1 hour
    per inch (25.4 mm) of thickness when tempering at 204°C (400°F), 4 hours
    minimum, then air cool to ambient temperature.
    However, where increased toughness is desired, at a sacrifice of some hardness, higher tempering temperatures are often used.

    AISI L6 steel does not become brittle, as many other die steels do, when tempered in the range of 232°C to 426°C (450 to 800°F).

    To
    minimize the possibility of cracking, the steel should be tempered
    immediately after hardening and should be heated slowly to the desired
    tempering temperature.

    Annealing

    Annealing of steel L6 must be performed after hot working and before re-hardening.

    Heat
    to 760°C (1400°F) and hold one hour per inch of maximum thickness. Then
    cool slowly with the furnace at a rate not exceeding 28°C per hour(50°F
    per hour) to 538°C (1000°F). Continue cooling to ambient temperature in
    the furnace or in air.

    For improved machinability, hold at 760°C
    (1400°F) for 1 hour per inch (25.4mm) of maximum thickness; 2 hours
    minimum. Then cool slowly with the furnace cool from 677°C (1250°F) to
    760°C (1400°F), hold for 8 hours, then air cool to ambient temperature.

    Because of its air-hardening ability, steel L6 should not be normalized.

    6. Machinability of Steel L6

    Machinability
    of tool steel L6 is very good. It rates 90% of the machinability of the
    W-group water hardening low alloy steels rated 100% as a baseline.

    7. Applications of ASTM A681 L6 Tool Steel

    AISI
    L6 cold working tool steel is for general purpose tools and dies where
    greater toughness is required, but with some sacrifice of
    abrasion-resistance.

    Typically used below applications:

    • spindles,

    • forming rolls,

    • punches,

    • blanking and forming dies,

    • trimmer dies,

    • clutch parts,

    • pawls,

    • bearings,

    • chucks parts,

    • rollers,

    • knuckle pins,

    • clutch pins,

    • shear blades

  • Previous:
  • Next:



  • Check out how to watch the special concert on your computer or mobile device.
    Concert Zone Site Will air an Slowdive Special Show Perfomance at Brooklyn Steel, Brooklyn, NY, USA
    You must be logged in to continue streaming.
    Live On : http://studio.stream-blitz.com/live/Slowdive-at-Brooklyn-Steel,-Brooklyn,-NY,-USA/l3i9ilHpPko (Live stream will be available after Login)

    Slowdive Brooklyn Steel, Brooklyn, NY, USA 08 May 2017
    Slowdive Concert review and setlist
    watch Slowdive in Brooklyn Steel, Brooklyn, NY, USA Live stream airs Tonight Online
    Slowdive Concert in Brooklyn Steel, Brooklyn, NY, USA 08 May 2017
    Missed Slowdive Concert?? , is now available to stream full.
    Exclusive Slowdive LIVE 2017 – Show – Live at Brooklyn Steel, Brooklyn, NY, USA .
    Slowdive LIVE 2017 Brooklyn Steel, Brooklyn, NY, USA – 08 May 2017 at Brooklyn Steel, Brooklyn, NY, USA
    Global Superstar Slowdive Will visit Brooklyn Steel, Brooklyn, NY, USA For the Tour Concert in 08 May 2017
    Watch Slowdive Live 2017 streaming at Brooklyn Steel, Brooklyn, NY, USA for 08 May 2017
    Slowdive Ticket Now available on ConcertZone , Worlds largest live streaming concert online
    Live concertZone can now confirm that Slowdive will concert at Brooklyn Steel, Brooklyn, NY, USA on 08 May 2017
    Get the Slowdive setlist of the concert at Brooklyn Steel, Brooklyn, NY, USA on 08 May 2017

    Facebook: https://www.facebook.com/
    Twitter: https://twitter.com/
    Instagram: http://instagram.com/
    ====================================
    En Vivo | Ao Vivo | In Direct
    ———-Thanks you—————



    Shooting USA’s Tony Pignato has High Speed Shooting Stabilizer’s new stabilizer called The Fang.

    FOLLOW SHOOTING USA:
    – Facebook: https://www.facebook.com/JimScoutten.ShootingUSA/
    – Twitter: https://twitter.com/ShootingUSA
    – Instagram: https://www.instagram.com/shootingusa/

    For more information head to http://www.shootingusa.com.
    Comments are also welcome at Jim@ShootingUSA.com.

    ABOUT SHOOTING USA:
    Jim Scoutten, America’s Most Watched Firearms Reporter, has been on the beat for 24 years, reporting the stories of the Shooting Sports and the firearms Industry. The show produces a series of popular segments focusing on historical guns, the personalities in the sport and industry, insider reports from gun tests, and practical tips from shooting sports pros. The show appeals to shooting sports enthusiasts of all ages and skill levels by providing practical tips on safely handling, modifying and repairing their favorite guns.

    WATCH:
    Shooting USA airs every Wednesday on Outdoor Channel.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag