Cheapest Price H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Factory in Korea

Cheapest Price 
 H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Factory in Korea

Short Description:

H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19. AISI H-13 tool steel is characterized by: Good resistance to abrasion at both low and high temperatures High level of toughness and ductility Uniform and high level of machinability and polishability Good high-temperature strength and resistance to t...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Cheapest Price H13 Tool Steel | 1.2344 | X40CrMoV5-1 | SKD61 Hot Work Steel Factory in Korea, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now


    H13 Tool Steel is chromium hot work tool steels which are widely used in hot and cold work tooling applications. H13 tool steel is classified as group H steels by the AISI classification system. This series of steels start from H1 to H19.

    AISI H-13 tool steel is characterized by:

    • Good resistance to abrasion at both low and high temperatures

    • High level of toughness and ductility

    • Uniform and high level of machinability and polishability

    • Good high-temperature strength and resistance to thermal fatigue

    • Excellent through-hardening properties

    • Very limited distortion during hardening

    In
    steel H13, the molybdenum and vanadium act as strengthening agents. The
    chromium content assists die steel H-13 to resist softening when used
    at high temperatures. H-13 die steels offers an excellent combination of
    shock and abrasion resistance, and possesses good red hardness. It is
    capable of withstanding rapid cooling and resists premature heat
    checking. Tool Steel H13 has good machinability, good weldability, good
    ductility, and can be formed by conventional means.

    Due to H13
    tool steel excellent combination of high toughness and fatigue
    resistance, AISI H13 hot work tool steel is used more than any other
    tool steel in tooling applications.

    1. Common H13 Tool Steel Related Specifications

    Country USA German Japan
    Standard ASTM A681 DIN EN ISO 4957 JIS G4404
    Grades H13 1.2344/X40CrMoV5-1 SKD61

    2. H13 Tool Steel Chemical Composition

    ASTM A681 C Mn P S Si Cr V Mo
    H13 0.32 0.45 0.2 0.6 0.03 0.03 0.8 1.25 4.75 5.5 0.8 1.2 1.1 1.75
    DIN ISO 4957 C Mn P S Si Cr V Mo
    1.2344 /X40CrMoV5-1 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.85 1.15 1.1 1.5
    JIS G4404 C Mn P S Si Cr V Mo
    SKD61 0.35 0.42 0.25 0.5 0.03 0.02 0.8 1.2 4.8 5.5 0.8 1.15 1.0 1.5

    3. AISI H13 Steel Mechanical Properties

    Properties

    Metric Imperial
    Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) 1200 – 1590 MPa 174000 – 231000 psi
    Tensile strength, yield (@20°C/68°F, varies with heat treatment) 1000 – 1380 MPa 145000 – 200000 psi
    Reduction of area (@20°C/68°F) 50.00% 50.00%
    Modulus of elasticity (@20°C/68°F) 215 GPa 31200 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30

    4. Forging of H13 Tool Steel
    Heating for forging must be done slowly and uniformly. Soak through at
    1900°-2000°F and reheat as often as necessary, stopping work when the
    temperature drops below 1650°F. After forging, cool slowly in lime,
    mica, dry ashes or furnace. H-13 should always be annealed after
    forging.

    5. Heat Treatment for H13 Tool Steels

    • Annealing

    Heat
    slowly to 1550°-1650°F, hold until entire mass is heated through, and
    cool slowly in the furnace (40F per hour) to about 1000°F, after which
    cooling rate may be increased. Suitable precautions must be taken to
    prevent excessive carburization or decarburization.

    • Stress Relieving

    When
    desirable to relieve the strains of machining, heat slowly to
    1050°-1250°F, allow to equalize, and then cool in still air (Strain
    Relieving). Â

    • Preheat Prior to Hardening

    Warm slightly before charging into the preheat furnace, which should be operating at 1400°-1500°F.

    • Hardening

    H13
    tool steel is a steel having very high hardenability and should be
    hardened by cooling in still air. The use of a salt bath or controlled
    atmosphere furnace is desirable to minimize decarburization, and if not
    available, pack hardening in spent pitch coke is suggested. The
    temperature employed is usually 1800°-1850°F, depending on size section.

    • Quenching

    Quench
    in still air or dry air blast. If complicated forms are to be hardened,
    an interrupted oil quench can be used. Quench part in oil and remove
    from bath when it just loses its color (1000°-1100°F). Finish cooling to
    below 150°-125°F in air, then temper immediately.

    • Tempering

    Tempering
    practice may vary with size and application, but is usually performed
    in the range of maximum secondary hardness or higher. Double tempering
    is recommended. The results below is H13 that was air quenched from
    1800°F and tempered for 4 hours at various temperatures. The results may
    be used as a guide, keeping in mind that parts of heavy section or mass
    may be several points lower in hardness.

    6. Application of AISI H13 Tool Steel

    • As Tools for Extrusion

    Part Aluminium, mag­nesium alloys, HRC Copper al­loys HRC Stainless steel HRC
    Dies, Backers, die-holders, liners, dummy blocks, stems 44-50 43-47 45-50
    41-50 40-48 40-48

    Austenitizing temperature

    1,870-1,885°F 1,900-1,920°F
    (1,020-1,030°C) (1,040-1,050°C)
    • As Plastic Molding Tool Steel

    Part Austenitizing temp. HRC
    Injection molds Compression/ transfer molds 1,870-1,885°F (1,020-1,030°C) 50-52
    Tempering 480°F (250°C)
    • Other Applications

    Applications Austenitizing temp HRC
    Severe cold punching, scrap shears 1,870-1,885°F 50-52
    (1,020-1,030°C)
    Tempering 480°F (250°C)
    Hot shearing 1,870-1,885°F
    (1,020-1,030°C) 50-52
    Tempering 480°F (250°C) or
    1,070-1,110°F 45-50
    (575-600°C)
    Shrink rings (e.g. for cemented carbide dies) 1,870-1,885°F 45-50
    (1,020-1,030°C)
    Tempering 1,070-1,110°F
    (575–600°C)
    Wear-resisting parts 1,870-1,885°F Core
    50-52
    Surface
    ~1000HV1
    (1,020-1,030°C)
    Tempering 1,070°F (575°C)
    nitrided

     

    If
    there are any queries about AISI H13 tool steel for hot working
    applications, please feel free to leave a comment below. And welcome
    enquiry of AISI H13 tool steel, we are professional and reliable
    supplier  for prime H13 tool steel materials.

  • Previous:
  • Next:



  • Shop McLeod Racing Chromoly Metal Flywheel: http://muscle mass.am/2iik8ft
    Subscribe for New Mustang & F-a hundred and fifty Video clips Every day: http://muscle mass.am/SubscribeAMyt

    Test out the McLeod Racing Chromoly Metal Flywheel which options possibly a six or eight bolt patter and is a dependable solution for your 1996-2014 Mustang GT when upgrading your clutch!
    six Bolt fifty oz (86-95 five.0L) http://www.americanmuscle.com/mcleod-chromoly-flywheel-6bolt-50oz-8695.html
    six Bolt (96-98, Late 01-10 GT) http://www.americanmuscle.com/mcleod-chromoly-flywheel-6bolt.html
    six Bolt 28 oz (86-95 five.0L) http://www.americanmuscle.com/mcleod-chromoly-flywheel-6bolt-28oz-8695.html
    eight Bolt (96-04 Cobra, Mach one ninety nine-Mid 01 GT 11-14 GT, Manager) http://www.americanmuscle.com/mcleod-chromoly-flywheel-8bolt.html

    Peace of Mind. When replacing or upgrading your Mustang’s clutch you have two alternatives, resurfacing your previous stock flywheel, or obtaining a manufacturer new flywheel. A new flywheel is a a lot improved selection than resurfacing, as it will dictate how very well your new clutch will perform, as very well as how prolonged it will last.

    Chromoly Metal Construction. Produced from chromoly metal for additional toughness, this McLeod Flywheel options a ring gear of 164 tooth, an motor harmony of oz, and a six or 8 bolt main sample. Chromoly Metal flywheels are ideal for avenue and race purposes the place off the line acceleration is wished-for.

    SFI Certified. If you are utilizing this flywheel in high general performance or racing purposes, SFI Certification is crucial so you can operate your Pony at the monitor or strip. And it is excellent for peace of brain even in a day-to-day driver – at greater RPMs, stock solid flywheels have been recognised to explode.

    Application. This McLeod Flywheel fits the 1996-12014 GT, late 2001-2004 GT, and 2005-2010 GT Mustangs geared up with the four.6L V8 motor and is the ideal companion to your new McLeod Clutch. Will not get the job done with McLeod RST/RXT Twin Disc Clutch item line.

    Technological Take note. This McLeod Flywheel is built for the GT Mustang’s with a six bolt main. 2001 Mustangs with output day just after 01/01 have a six bolt main. You should check with your Ford dealer to ascertain if you have a six bolt or an eight bolt main.
    Fitment: 1996 1997 1998 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014

    six bolt 50oz 86-95 five.0L
    Product #386654
    MPN# 483100-fifty

    96-98, late 01-10 GT
    Product #386656
    MPN# 483456

    six bolt 28 oz 86-95 five.0L
    Product #386655
    MPN# 483100-28

    eight bolt 96-04 Cobra, Mach one ninety nine-Mid 01 GT 11-14 GT, Manager
    Product #386657
    MPN# 483458

    —————————————————————-
    Make absolutely sure to Follow AmericanMuscle for the most recent Ford Mustang information, videos, photographs and content material!

    SUBSCRIBE at http://www.youtube.com/americanmusclevideos

    Fb: http://www.facebook.com/americanmuscle
    Twitter: http://www.twitter.com/americanmuscle
    Google+: http://www.google.com/+americanmuscle
    Instagram: http://www.instagram.com/americanmusclecom

    AmericanMuscle.com is your aftermarket Mustang authority! We carry a big choice of aftermarket Ford Mustang general performance areas and styling components. With no cost transport inside of the United States and most effective price-matching and buyer support in the sector, we have you included for your latemodel 1979-2015 Ford Mustangs. Make absolutely sure to communicate to 1 of our Mustang Professionals if you have any thoughts or want assist scheduling your Mustang job or Mustang construct!

    http://www.americanmuscle.com



    FEATURES
    Slow speed outlet
    Body material:Die cast aluminium
    Bowl material:Polished stainless steel
    Bowl tool material:Coated
    Motor power (wattage):500W
    Speed:6 speeds + Pulse
    Bowl size (total):5 litres
    Capacity – cake :2.7kg
    Capacity – dough :1.3kg
    Capacity – egg whites :12 maximum
    Capacity – flour for pastry :680g

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree