Cheap PriceList for BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Wholesale to Lesotho

Cheap PriceList for
 BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Wholesale to Lesotho

Short Description:

BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Cheap PriceList for BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Wholesale to Lesotho, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.


    BS EN 42crmo4 Alloy Steel

    is a common chromium-molybdenum steel that usually used after quenched
    and tempered, with high intensity, high hardenability. BS EN 42CrMo4
    round steel has better performance than 34CrMo4 steel due to the carbon
    and chromium content is higher. 42CrMo4 alloy steel

    has higher strength and hardenability. The 42CrMo4 alloy material also
    has high fatigue strength and good low-temperature impact toughness. The

    temper brittleness is not obvious.

    Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more

    preferable in terms of material properties. EN 42CrMo4 alloy
    engineering steel materials have been widely used in automotive driving
    elements. Otai Steel is able to supply you prime quality of 42CrMo4
    alloy steel materials with wide range.

    1.42CrMo4 Alloy Steel Supply Range

    42CrMo4 Round bar Sizes: 80mm – 1200mm
    Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
    Other steel shape and sizes available according to your requirements.

    Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.

    2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents

    BS EN 10250 Material No. DIN ASTM A29 JIS G4105 BS 970-3-1991 BS 970-1955 AS 1444 AFNOR
    42CrMo4 1.7225 38HM 4140 SCM440 708M40 EN19A 4140 42CD4

    3.42CrMo4 Alloy Steel Chemical Composition

    42CrMo4/1.7225 C Mn Si P S Cr Mo
    0.38-0.45 0.60-0.90 0.40 max 0.035 max 0.035 max 0.90-1.20 0.15-0.30

    4. DIN 42CrMo4 Alloy Steel Mechanical Properties

    Size Ø mm Yield stress
    Rp0.2,N/nn2, min.
    Ultimate tensile Stress,
    Rm,N/nn2
    Elongation
    A5,%, min.
    Hardness HB Toughness
    KV, Joule, min.
    <40 750 1000-1200 11 295-355 35 at 20ºC
    40-95 650 900-1100 12 265-325 35 at 20ºC
    >95 550 800-950 13 235-295 35 at 20ºC

    5. Heat Treatment of 42CrMo4 Steels

    Annealing of 42CrMo4 Steels

    • Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;

    • Cool slowly in the furnace to the temperature 480°;

    • Complete annealing the steel in the air.

    Quenched and Tempered (Q+T)

    • Heat 42CrMo4 steel slowly to 880°C;

    • Soak at this temperature then quench in oil;

    • Temper as soon as 42CrMo4 steel reach room temperature (20°C);

    • Heat uniformly to the suitable temperature of 560°C;

    • Withdraw the 42CrMo4 material from the furnace and cool in the air.

    6. Forging of 42CrMo4 Alloy Steel

    • Preheat 42CrMo4 engineering steel uniformly and slowly;

    • Increase the forging temperature up to 1150-1200°C.

    • Always keep the forging temperature above at least 850°C

    7.Weldability

    Engineering

    steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
    strongly recommended; the upper limit should not be exceeded because of
    risk for deterioration of the chrome layer.

    Alloy steel 42CrMo4
    can be friction welded. However, precautions are necessary so as to
    limit the formation of undesirable microstructures in the welded zone.

    8.Application of 42CrMo4 Alloy Steels

    EN

    42CrMo4 alloy steel is widely used for engineering steel purpose, such
    as: making various kinds of machinery, automobile, mining spare part,
    the gearwheel of the engine, the driving gear of supercharger, the
    connecting rob, the pinchock under the high pressure, parts for power
    train applications, cold formed fastener components, shafts, gears,
    drill collars for the oil exploration, etc.

  • Previous:
  • Next:



  • Here I am drifting through 1.25×2 tool steel bar stock to form the eye on an axe. This takes one heat with a 6lb sledge if done correctly.



    Impressive PE100 water supply project from Turkey to Northern Cyprus

    Through the Mediterranean Sea, a 80 km long fresh water pipeline runs in depth of 250 m from Turkey to Northern Cyprus. The project is unique in the world and was realized in 2013 after a long planning period. REINERT-RITZ was selected as a partner for the connection of the 500 m long PE pipes. Our Stub ends are positioned in the most highly stressed zone, the anchor points. In this video, you learn more about the project and how we work. As a specialist for fittings from PE and PP up to a diameter of d 2000 mm for pipe systems up to 25 bar we provide the right connection for your projects. Our products are produced from hollow bars and solid rods: eg Stub ends, flanges, tees and cross-pieces, bends, elbows, reductions and transitional connections to other materials. The main application area is the water and gas supply, but also for industrial and chemical, fire fighting and sewerage pressure systems, our product portfolio can be used.

    Further links to the project:

    • 500m long PE tubes swim in the Mediterranean (https://www.google.de/maps/@36.3101376,33.9006196,742m/data=!3m1!1e3?hl=en)
    • Wikipedia Article (http://en.wikipedia.org/wiki/Northern_Cyprus_Water_Supply_Project)

    Project Information:

    Name: Northern Cyprus Water Supply Project; KKTC Su Temin Projesi
    Flow medium: water
    Pipe diameter (OD): 1600 mm
    Material: PE 100 (HDPE)
    Product: customized stub end

    REINERT-RITZ (http://www.reinert-ritz.de)

    DEUTSCH:

    Weltweit einmaliges PE100 Wasserleitungsprojekt von der Türkei nach Nordzypern

    Durch das Mittelmeer erstreckt sich in 250 m Tiefe eine 80 km lange Frischwasserleitung von der Türkei nach Nordzypern. Das Projekt ist weltweit einmalig und wurde nach langer Planungszeit in 2013 realisiert. REINERT-RITZ wurde als Partner für die Verbindung der 500 m langen PE-Rohre ausgewählt. Unsere Vorschweißbunde werden in der am höchsten beanspruchten Zone, an den Ankerpunkten, eingesetzt. In diesem Video erfahren Sie mehr über das Projekt und unsere Arbeitsweise. Als Spezialist für Rohrverbindungsteile aus PE und PP bis zu einem Durchmesser von d 2000 mm für Druckrohrsysteme bis 25 bar erarbeiten wir auch für Sie die passende Verbindung. Unsere Produkte entstehen auf der Basis von Hohl- und Vollstäben: z.B. Vorschweißbunde, Flansche, T- und Kreuzstücke, Bögen, Winkel, Reduktionen und Übergangsverbindungen auf andere Werkstoffe. Der Hauptanwendungsbereich ist die Wasser- und Gasversorgung, aber auch für Industrie- und Chemie-, Feuerlösch- und Abwasserdruckleitungen wird unser Produktportfolio verwendet.

    Weiterführende Links zum Projekt:

    • 500m lange PE Rohre schwimmen im Mittelmeer (Google Maps: https://www.google.de/maps/@36.3101376,33.9006196,742m/data=!3m1!1e3?hl=de)
    • Englischer Wikipedia Artikel (http://en.wikipedia.org/wiki/Northern_Cyprus_Water_Supply_Project)

    Projektinformationen:

    Bezeichnung: Northern Cyprus Water Supply Project; KKTC Su Temin Projesi
    Medium: Wasser
    Rohrleitungsdurchmesser (DA): 1600 mm
    Material: PE 100
    Produkt: kundenindividueller Vorschweißbund

    REINERT-RITZ (http://www.reinert-ritz.de)

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star