Bottom price for C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Liverpool

Bottom price for
 C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Liverpool

Short Description:

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suita...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Bottom price for C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Factory for Liverpool, We will wholeheartedly welcome all clients in the industry both at home and abroad to cooperate hand in hand, and create a bright future together.


    Steel C45 Round Bar is
    an unalloyed medium carbon steel, which is also a general carbon
    engineering steel. C45 is a medium strength steel with good
    machinability and excellent tensile properties. C45 round steel is
    generally supplied in the black hot rolled or occasionally in the
    normalised condition, with a typical tensile strength range 570 – 700
    Mpa and Brinell hardness range 170 – 210 in either condition. It does
    not however respond satisfactorily to nitriding due to a lack of
    suitable alloying elements.

    C45 round bar steel is equivalent to EN8 or 080M40.
    Steel C45 bar or plate is suitable for the manufacture of parts such as
    gears, bolts, general-purpose axles and shafts, keys and studs.

    1. Supply Range of Steel C45 Round Bar

    • C45 Steel Round Bar: diameter 8mm – 3000mm

    • C45 Steel Plate: thickness 10mm – 1500mm  x width 200mm – 3000mm

    • C45 Steel Flat Bar: 200mm – 1000mm

    • Square C45 Steel: 20mm-800mm

    • Hexagon Steel.

    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. Common C45 Steel Specifications

    Country USA British Japan Australia
    Standard ASTM A29 EN 10083-2 JIS G4051 AS 1442
    Grades 1045 C45/1.1191 S45C 1045

    3. C45 Round Bar Steel Chemical Composition Properties

    Standard Grade C Mn P S Si Ni Cr
    ASTM A29 1045 0.43-0.50 0.60-0.90 0.04 0.050  -  -  -
    EN 10083-2 C45/1.1191 0.42-0.50 0.50-0.90 0.03 0.035 0.04 0.4 0.4
    JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35  -  -

    4. Mechanical Properties of C45 Round Bar Steel Material

    • Mechanical Properties in Quenched+Tempered Condition

    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5 (%) Reduction Z (%)
    <16 <8 min. 490 700-850 min. 14 min. 35
    <17-40 <8<=20 min. 430 650-800 min. 16 min. 40
    <41-100 <20<=60 min. 370 630-780 min. 17 min. 45
    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5(%)
    <16 <16 min. 390 min. 620 min. 14
    <17-100 <16<=100 min. 305 min. 305 min. 16
    <101-250 <100<250 min. 275 min. 560 min. 16

    5. Forging of Carbon Steel C45 Round Bar

    Hot forming temperature: 850-1200oC.

    Pre
    heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC
    maximum, hold until temperature is uniform throughout the section and
    commence forging immediately. Forging is not workable below 850 oC.
    Finished forgings could be air cooled.

    We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.

    6. DIN C45 Round Bar Steel Grade Heat Treatment

    Forging or hot rolling: 1100 – 850°C
    Normalising:  840 – 880°C/air
    Soft annealing:  680 – 710°C/furnace
    Hardening:  820 – 860°C/water, oil
    Tempering:  550 – 660°C/air

    7. Hardening of DIN C45 Steel Hardening

    Harden from a temperature of 820-860oC followed by water or oil quenching.

    Heat
    to 820 oC – 850 oC hold until temperature is uniform throughout the
    section, soak for 10 – 15 minutes per 25mm of section, and quench in
    water or brine. Or,

    Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.

    Surface hardness for C45 special steel round bar after flame or induction hardning:

    • Steel Name       Steel number          Surface Harndess

    • C45                        1.1191                        min. 55 HRC

    8. Application of DIN Carbon Steel C45 Round Bar

    DIN
    C45 round bar steel material and steel plate C45, flats are widely used
    in all industry for uses which require more strength and wear
    resistance than the low carbon mild steel.

    Quenched and
    subsequently tempered steel for C45 steel grade round bar, steel plate,
    flat and square is used for axles, bolts, forged connecting rods,
    crankshafts, torsion bars, light gears, guide rods, screws, forgings,
    wheel tyres, shafts, sickles, axes, knives, wood working drills,
    hammers, etc.

    Welcome customers to inquiry DIN C45 round bar,
    CK45/1.1191 steel plate, flat steel for C45 steel price. We are
    professional supplier and exporter for more than 20 years. We offer you
    worldwide solution for C45 round bar steel.

  • Previous:
  • Next:



  • Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracke
    รับส่วนลด คลิ๊ก : https://goo.gl/o1CFZS

    Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracketคุณผู้ชายกำลังอ่านความคิดเห็นสินค้า Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracket เพื่อช่วยอำนวยความสะดวก อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีสินค้า ที่คุณต้องการ พร้อมให้คำแนะนำที่ซื้อ สินค้า Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracket {ราคาดีที่สุด|ราคาถูกที่สุด|ราคาถูก|ราคาที่คุณสัมผัสได้ แนะนำให้ท่าน Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracket
    ซื้อของออนไลน์ ของแท้ ของดี มีคุณภาพ จัดส่งเร็ว เก็บเงินปลายทาง Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracket Functions: Tough Sturdy Uncomplicated installtion with stainless metal screws and bracket Uncomplicated Set up Replacement can be applied as a bicycle entrance fender Suitable for mounting on entrance of the bicycle suits to 24 #039 #039 to 28 #039 #039 wheel bicycle Requirements: Shade: Black Materials: Aluminum Alloy Fitment: MTB / highway bicycle / folding bicycle Max Load: 10KG suggestions not to load as well heavy items avoid entrance fork is chubby which make it challenging to command way Package Content material: one x Bicycle Entrance Rack 385 บาท store-biking…

    บริการส่งฟรี สั่งซื้อพร้อมส่วนลด เก็บเงินปลายทาง https://goo.gl/o1CFZS
    ———————————————————————————-
    ค้นหายอดนิยม : Aluminum, Alloy, Bicycle, Entrance, Rack, Luggage, Shelf, Panniers, Bracket, Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracket

    Aluminum #Alloy #Bicycle #Entrance #Rack #Luggage #Shelf #Panniers #Bracket #Aluminum Alloy Bicycle Entrance Rack Luggage Shelf Panniers Bracket



    This is how I build an Alien Coil. Original concept by @blueeyedgoon83 on Instagram, who has just come out with a new RDA in partnership with 528 Custom Vapes. So, it’s only natural that the first build we put in this RDA be an Alien coil.

    It’s a 3×28 and 36 Alien, all nichrome. And it ohms out at .14. Alien coils make for delicious, tasty builds in an RDA, but they’re not the easiest things to make. I’m going to show you some tricks I’ve picked up along the way that have helped me make this particular wire.

    blueeyedgoon83
    @blueeyedgoon83 on Instagram

    The Goon RDA at 528 Custom Vapes

    http://www.528custom.com/products/stainless-steel-goon-rda?variant=11180360901

    00:00-00:17 – Intro
    00:18-01:40 – Alien Coil Concept Introduction
    01:41-02:21 – Tools
    02:22-04:23 – Building the initial clapton coil
    04:44-06:11 – Decoring the clapton wire
    06:12-08:06 – Stretching and spooling the decored clapton
    08:07-10:56 – Prepping and seating the triple core
    10:57-14:23 – Alien Wire!
    14:24-14:52 – A look at the wire and wrapping some coils
    14:53-15:35 – Wrapping some coils (3mm ID, 5 wraps, .14 ohms)
    15:36-16:59 – Building, shaping our coils
    17:00-17:45 – Obligatory glow shots, drip shots, and burn
    17:46-22:49 – Vaping, wrap up, and discussion

    Please remember to comment, like, share, and subscribe! And check out Project Fog!

    Follow me on Instagram @ohmboyjosh

    Come be my friend on Facebook

    https://www.facebook.com/OhmBoyJoshOnYouTube

    Have a product you want reviewed? A new eliquid? A new RDA? A mod? Want to get your shop’s name out there? Then please contact me by email at ohmboyjosh@gmail.com, DM me on Instagram, or message me on Facebook.

    Support Casaa – Fight for your Right to Vape!

    Vape On, Vapers!

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag