Big discounting M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory in Karachi

Big discounting
 M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory in Karachi

Short Description:

AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2 is a medium alloyed high speed steel which has good machinability. The H-SS M2 chemical composition gives a good combination of well-balanced toughness, wear resistance and red hardness properties. Widely used for cutting tools such as twist drills, taps, milling cutters, saws, knives etc. Also commonly used in cold work punches and dies and cutting applications involving high speed...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our goal is to provide high quality products at competitive prices, and top-notch service to customers around the world. We are ISO9001, CE, and GS certified and strictly adhere to their quality specifications for Big discounting M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory in Karachi, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!


    AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2
    is a medium alloyed high speed steel which has good machinability. The
    H-SS M2 chemical composition gives a good combination of well-balanced
    toughness, wear resistance and red hardness properties. Widely used for
    cutting tools such as twist drills, taps, milling cutters, saws, knives
    etc. Also commonly used in cold work punches and dies and cutting
    applications involving high speed and light cuts.

    Grade M2 High Speed Steel is by far the most popular high speed steel replacing high speed steel grade T1 in most applications because of its superior properties and relative economy.

    1. Common M2 Tool Steel Related Specifications and Equivalents

    Country USA German Japan
    Standard ASTM A600 DIN EN ISO 4957 JIS G4403
    Grades M2 1.3343 SKH51

    2. ASTM M2 Tool Steel Chemical Composition Properties

    ASTM A600 C Mn P S Si Cr V Mo W
    M2 regular C 0.78 0.88 0.15 0.40 0.03 0.03 0.20 0.45 3.75 4.50 1.75 2.20 4.50 5.50 5.50 6.75
    DIN ISO 4957 C Mn P S Si Cr V Mo W
    1.3343 0.86 0.94 0.45 3.80 4.50 1.70 2.10 4.70 5.20 5.90 6.70
    JIS G4403 C Mn P S Si Cr V Mo W
    SKH51 0.80 0.88 0.40 0.03 0.03 0.45 3.80 4.50 1.70 2.10 4.70 5.20 5.90 6.70

    3. AISI HSS M2 Tool Steel Mechanical Properties

    • Physical Properties of HSS M2 Material

    Density         0.294 lb/in3 (8138 kg/m3)
    Specific Gravity                  8.15
    Modulus of Elasticity         0.294 lb/in3 (8138 kg/m3)
    Thermal conductivity         24 Btu/ft/hr/°F  41.5 W/m/°K
    Machinability          65% of a 1% carbon steel
    • AISI M2 Tool Steels Properties Mechanical

    Mechanical properties Metric Imperial
    Hardness, Rockwell C (tempered at 1150°F, quenched at 2200°F) 62 62
    Hardness, Rockwell C (as hardened, quenched at 2200°F) 65 65
    Compressive yield strength (when tempered at 300°F) 3250 MPa 471000 psi
    Izod impact unnotched (when tempered at 300°F) 67 J 49.4 ft-lb
    Abrasion (loss in mm3, as-hardened; ASTM G65) 25.8 25.8
    Abrasion (loss in mm3, tempered at 1275°F; ASTM G65) 77.7 77.7
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Elastic modulus 190-210 GPa 27557-30458 ksi
    • M2 Steels Thermal Properties

    Thermal properties Metric Imperial
    CTE, linear (@20.0 – 100°C/ 68.0 – 212°F) 10 μm/m°C 5.56 μin/in°F
    CTE, linear (@20.0 – 500°C/68.0 – 932°F) 12.2 μm/m°C 6.78 μin/in°F
    CTE, linear (@20.0 – 850°C/68.0 – 1560°F) 12.6 μm/m°C 7 μin/in°F

    4. Forging of AISI M2 High Speed Steel

    Pre
    heat M2 HSS steel slowly and uniformly to 850-900°C. The heat should
    then be increased more quickly to the forging temperature of
    1050-1150°C. If during the forging
    the temperature of the M2 high speed tool steel material drops below
    880-900°C, re-heating will be necessary. Cool the M2 steel component
    very slowly after forging.

    5. Heat Treatment of M2 Steel HSS

    • Anneal

    Heat
    to 1600° F, soak thoroughly at heat. Furnace cool 25° F per hour to
    900° F, air cool to room temperature. Approximate annealed hardness 241
    Maximum Brinell.

    Stress Relief of Unhardened Material: Heat slowly
    to 1200 to 1250° F. Soak for two hours per inch of thickness at heat.
    Slow cool (furnace cool if possible) to room temperature.

    • Hardening

    Preheat: Heat slowly to 1550° F, soak thoroughly, heat to 1850° F, soak thoroughly.

    • Harden

    Soak
    time in the furnace varies from a few minutes to a 15 minutes,
    depending tool size, heat capacity of the furnace, and the size of the
    charge. – Heat to 2150 to 2200° F for max. toughness and minimum
    distortion. – Heat to 2250 to 2275° F for max. hardness and abrasion
    resistance.

    • Quench

    For full
    hardness, oil quench to 150-200° F. Air quench to 150° F. When quenching
    in hot salt maintain the quench just above the Ms temperature. After
    equalizing withdraw parts from the hot salt and air cooled to 150° F.

    • Temper

    Double
    temper is mandatory, three tempers are sometimes preferred. Soak for 2
    hours per inch of thickness. Air cool to room temperature between
    tempers. The best tempering range for hardness, strength and toughness
    is 1000 to 1050° F.

    Temper° F Rockwell “C” Temper° F Rockwell “C”
    As-quenched 64 900 64
    400 63 1000 65.5
    500 62.5 1050 63.5
    600 62.5 1100 61.5
    700 62.5 1150 60
    800 63.5 1200 53

    6. Machinability of AISI M2 Tool Steel H-SS

    Shaping
    of HSS M2 tool steels can be carried out using grinding methods.
    However, they have poor grinding capability and hence they are regarded
    as “medium” machinability tool steel under annealed conditions. The
    machinability of these tool steels M2 is only 50% of that of the easily
    machinable W group or water hardening tool steels.

    7. M2 Tool Steel Applications

    The main use of high-speed steels continues to be in the manufacture of various cutting tools.

    Typical
    applications for M2 high speed steel are twist drills, reamers,
    broaching tools, taps, milling tools, metal saws. M2 is suitable for
    cold forming tools such as extrusion rams and dies, also widely used in
    all kinds of cutting tools, knife and punches and die applications,
    plastic moulds with elevated wear resistance and screws.

  • Previous:
  • Next:



  • SDT 13/16 quot; x 2 quot; Cutting Depth High Speed Steel Annular Cutter with 3/4..
    For more details please visit: http://po.st/NlweOE Thank You!

    SDT 13/16 quot x 2 quot Cutting Depth High Speed Steel Annular

    https://www.youtube.com/watch?v=jGD_QGB3irE



    HB-superfinishing machine
    HB-superfinishing tool
    Jinan Huabao machinery co., ltd

    http://www.vsrsuperfinishing.com

    E-mail:brady0086@hotmail.com
    TEL: +86 531 58761725
    FAX: +86 531 88022270
    CELL: +86 15866605088
    E-mail:brady0086@hotmail.com
    Skype: brady0086
    ADD:Rm707 Lianggu Building, No.6 Qilihe Road,Jinan,Shandong,China,250001
    Contact: Mr. Brady
    Position:sales manager

    Great Innovation For Metallic Surface Superfinishing &
    Provide Complex Problems Solutions

    Superfinishing machine

    The brief:
    1. Obtain surface roughness less than Ra0.1 easily;
    2. Suitable for different shapes, such as cylindrical, internal, rotor, curved and spherical, axis,etc;
    3. Suitable for all kinds of materials, such as carbon steel, aluminum alloy, copper, etc;
    4.Suitable for different industries, such as Turbine, Mining machinery, Mechanical valve, Petroleum Machinery, Bearing mechanical, Mold, Paper machinery, Pharmaceutical Machinery centrifuge, Piston rod, Hydraulic cylinder, Helical rod, Metallurgical Machinery, Wind power, Hydropower, Motor.
    5.Can be used in all kinds of machine tools, such as lathe, grinding machine, boring machine, milling machine, planning machine, spherical lathe and CNC machine tools, ect;
    6. Just one time, improve production efficiency greatly;
    7. Components: tool assembly and control-center;
    8. Improve the micro-hardness 20%;
    9. Improve the wear-resistance;
    10. Improve the fatigue life 5 ~100 times;
    11. Suitable for the hardness below HRC65;
    12. Improve corrosion resistance;
    13. It’s a nonabrasive process, without abrasive, felt, lapping compounds and hard work.
    14.Relieve the residual stress greatly;
    15.Long service life of tool and workpieces;
    16. It saves time, money and energy;
    17. No sawdust and sawdust wastes occurred,no noise and damage to the environment;
    18.Easy to operate.

    The principle:
    According to metallic materials cold plastic deformation in the normal temperature and apply HB-superfinish equipment to superfinish the surface without any abrasive to reach desirable roughness,this process just like ironing clothes.
    The process:
    Firstly, make the workpiece pre-machining in the general purpose machine, then apply HB-super finishing equipment again, the roughness will reach less than Ra0.1 easily, just like ironing the clothes and a kind of compressive stress created on the surface at the same time, the micro-hardness will be improved more than 20%, the wear resistance will be improved greatly and the life will be improved 5 ~10 times.

    The description:
    This equipment including two parts, one is cutter, the other is control center,
    the cutter is controlled by control center,
    there is a unstable ball which made from a special materials on the cutter head,
    during process, the ball impacts the surface 30,000 times per second with very little pressure about 2.5N,
    the temperature is little higher than the normal temperature,
    it’s a nonabrassive process, without abrasive, felt, lapping compounds and hardwork,
    save time and cost greatly, and very environmental,
    it’s very different from the rolling, polishing, grinding and other process,
    more precisely, it just like ironing the clothes, never remove any materials from the surface.

    Huabao machinery co., ltd

    http://www.vsrsuperfinishing.com

    E-mail:brady0086@hotmail.com
    TEL: +86 531 58761725
    FAX: +86 531 88022270
    CELL: +86 15866605088
    E-mail:brady0086@hotmail.com
    Skype: brady0086
    No.6 Qilihe Road,Jinan,Shandong,China,250001
    Contact: Mr. Brady

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House