8 Years Manufacturer Metal Forms Manufacturer in Macedonia

8 Years Manufacturer
 Metal Forms Manufacturer in Macedonia

Short Description:

Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker)             Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg             Discs, pu...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for 8 Years Manufacturer Metal Forms Manufacturer in Macedonia, We cordially welcome customers from at home and abroad to join us and cooperate with us to enjoy a better future.


    Steel products can also be divided by their shapes. We can produce in the following shapes:

    Forged bars

    Length up to 16,000 mm
    Round from 80 to 1,200 mm Ø
    Square from 140 mm to 460 mm
    Flat from 30 x 25 mm to 2.000 x 600 mm
    (in case of a smaller width correspondingly thicker)

    [Translate to English:] Geschmiedete Stäbe
               

    Shafts

    Barrel/flange diameter up to 1.600 mm Ø
    Length up to 15.000 mm
    Weight from 10 kg to 35.000 kg

    [Translate to English:] Wellen
               

    Discs, punched discs, hubs

    Diameter up to 1.200 mm
    (smaller dias correspondingly thicker)
    Thickness up to 600 mm

     

     

    [Translate to English:] Scheiben, Lochscheiben, Nabenscheiben
               

    Blocks, plates (forged three-dimensionally)

    Length max. 6.000 mm
    Width max. 1.800 mm
    Thickness max. 1.000 mm
    (in case of smaller thickness greater length and width)
    Weight max. 30.000 kg

     

     

    [Translate to English:] Blöcke, Platten
               

    Forged tubes, cylinders and other hollow forgings

    Inner diameter 160 mm to 600 mm
    Length up to 1,200 mm
    Weight up to 10.000 kg

     

     

    [Translate to English:] Geschmiedete Hohlstäbe, Zylinder
               

    Forged rings

    Outer diameter up to 2.400 mm
    Height up to 2.200 mm
    Weight up to 25.000 kg

    [Translate to English:] Geschmiedete Ringe
               

    Seamless rolled rings

    Outer diameter up to 3.500 mm
    Height up to 800 mm
    Weight 10 kg to 8.000 kg

    [Translate to English:] Nahtlos gewalzte Ringe
              

    We can also produce according to clients' designs. If you have your own design, just feel free to contact us.

  • Previous:
  • Next:



  • Velvet Shield is a very soft and flexible blanket that can withstand up to 3,000°F.

    http://www.tifco.com



    ASTM A213 T22 Seamless Ferritic and Austenitic Alloy-Metal Boiler, Superheater, Warmth-Exchanger Tubes.
    Grades made up of the letter H in their designation have requirements distinctive from these of identical grades not made up of the letter H.
    These distinctive requirements provide greater creep-rupture power than commonly achievable in identical grades without having these distinctive requirements. ASTM A213 T22 tubes shall be made by the seamless approach and shall be either very hot concluded or cold concluded, as specified. Quality TP347HFG shall be cold concluded. Warmth procedure shall be finished independently and in addition to heating for very hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless metal tubes shall be furnished in the heat-taken care of condition. Alternatively, straight away soon after very hot forming, whilst the temperature of the tubes is not a lot less than the bare minimum option temperature, tubes may possibly be separately quenched in water or fast cooled by other usually means. Stress examination, hardness examination, flattening examination, and flaring examination shall be finished to just about every tube. Also, just about every tube shall be subjected to the nondestructive electric examination or hydrostatic examination.
    ASTM A209 Through A213
    Other conventional specifications incorporate the types of A209 seamless carbon-molybdenum alloy-metal boiler and superheater tubes A210 seamless medium-carbon metal boiler and superheater tubes and A213 seamless ferritic and austenitic metal boiler, superheater and heat-exchanger tubes.
    Piping wall thicknesses array from 1/2 inch to five inches. A213 grades also have the letter H or M assigned, which improvements the composition and specifications for that series.
    This summary is a short summary of the referenced conventional. It is informational only and not an formal portion of the conventional the comprehensive text of the conventional alone should be referred to for its use and application.
    ASTM does not give any guarantee express or implied or make any illustration that the contents of this summary are accurate, finish or up to date.
    Wall thickness is average wall or according to ASME SA530.
    Notes for Bend Examination:
    For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7. or a lot less shall be subjected to the bend examination as a substitute of the flattening examination.
    Other pipe whose diameter equals or exceeds NPS 10 may possibly be specified the bend examination in location of the flattening examination subject matter to the acceptance of the purchaser.
    The bend examination specimens shall be bent at place temperature via one hundred eighty without having cracking on the outdoors of the bent part.
    Packing:
    Packed in wooden crates, wrapped in plastic, and suitably secured for sea-worthly shipping and delivery or as asked for.
    Both of those ends of just about every crate will suggest the order no., heat no., dimensions, fat and bundles or as asked for.
    Shipping and delivery:
    Pipes are supplied in hexagonal bundles or spherical bundles tied with metal strip.
    Excess weight of bundle – up to 5000 kg on ask for of client.
    Just about every bundle is furnished with 3 tags.

    We are manufacturer of ASTM A213 T22 alloy tube and supply high high quality ASTM A213 T22 alloy tube in both equally huge and smaller portions around the world and supply you the most effective rates in the marketplace.

    We have a workforce of expert experts with years of knowledge in manufacturing. (www.sunnysteel.com)

    Sunny Metal Company Ltd.

    0086-21-33780199
    No. 273, Siping Highway, Shanghai, 200081, China
    Sum Xuu
    sumxu@163.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup