8 Years Factory AISI304| SUS304| EN1.4948 Manufacturer in Rotterdam

8 Years Factory
 AISI304| SUS304| EN1.4948 Manufacturer in Rotterdam

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We always believe that one's character decides products' quality, the details decides products' quality ,with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for 8 Years Factory AISI304| SUS304| EN1.4948 Manufacturer in Rotterdam, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • Internationally famous oceanographer Steve Zissou (Bill Murray) and his crew — Team Zissou — set sail on an expedition to hunt down the mysterious, elusive, possibly nonexistent Jaguar Shark that killed Zissou’s partner during the documentary filming of their latest adventure. They are joined on their voyage by a young airline co-pilot, who may or may not be Zissou’s son (Owen Wilson), a beautiful journalist (Cate Blanchett) assigned to write a profile of Zissou, and his estranged wife and co-producer, Eleanor (Anjelica Huston). They face overwhelming complications including pirates, kidnapping, and bankruptcy.



    Aluminum Prices Artesia http://smartrecycling.com/scrap-metal-recycling-los-angeles/

    We deliver the greatest spectrum of scrap metal recycling services and collection storage containers for recyclables in the Artesia area. From special equipment for reclamation, disassembly or collection, to identifying the aftermarket most beneficial to you, Smart Recycling’s professional expertise and flexibility is second to none.
    Smart Recycling, Inc.’s comprehensive experience in the metals industry enables us to obtain incredibly competitive prices for your metals:
    Fixed Brokerage Sales – Let Smart Recycling, Inc. broker your materials to gain the greatest possible profit.
    Post Reclamation Salvage – Our capacity to optimize sales of your goods is second to none.
    Direct Supplier to Foundries and Mills – Removing the middle-man makes it possible for us to pay “top-dollar” to our clientele.
    We maintain a steel shredder at our center – Our investment in capital equipment puts extra cash in your pocket.

    ==========================
    Aluminum Prices Artesia

    In 2010, U.S. nonferrous scrap healing consisted of:

    Aluminum Recycling

    Getting to identify the major kinds of scrap steel is a vital step in coming to be an effective scrap metal vendor.

    With a healing of 4.6 million statistics bunches every year in the U.S, much more aluminum is reused than any kind of various other nonferrous steels. Aluminum is light and also normally easy to flex. It will not provide off triggers on a grinding wheel, as well as is nonmagnetic, unlike in a similar way colored metals such as steel. Although aluminum can be found in different qualities, it is hard to determine between them.

    Aluminum Prices Artesia

    Just like any kind of metal, much less contamination enhances the worth, such as disassembling devices to divide various types of steel, or eliminating various other contaminants such as encasement with concrete or various other product. Webbing as well as screws ought to be gotten rid of from patio chair. Look for light weight aluminum scrap in housing as well as demolition jobs, consisting of door as well as home window frames, rain gutters, home siding, as well as wire. In automobile stores, aluminum could be found in transmission housings and pistons.

    Copper Recycling

    Copper is the 3rd most commonly recycled nonferrous steel. As a matter of fact, over 80% of copper ever before generated still exists. It is easy to recognize due to its distinct colour, as well as that it is nonmagnetic. When positioned against a grinding wheel, copper will certainly not stimulate.

    Stainless Steel Recycling

    Stainless steel is the second most commonly recycled nonferrous steel. It inclusives steel alloys which contains a minimal proportion of chromium. Another metal typically made use of as an alloy in stainless steel is nickel. Unlike various other nonferrous steels, stainless steel could be magnetic, depending upon nickel content. Extra nickel lowers the magnetic residential or commercial properties of the stainless steel. Stainless-steel will certainly stimulate in feedback to a grinding wheel.

    Brass Recycling

    Brass is an alloy of copper and also zinc, along with tiny amounts of various other steels consisting of manganese, tin, iron or light weight aluminum. The shade series of brass consists of red, yellow, silver and gold. In terms of magnetic destination, it can reveal from nonmagnetic to a little magnetic. On the grinding wheel it will certainly vary between no stimulating to brief red triggers.

    Aluminum Prices Artesia

    https://www.youtube.com/watch?v=HWqYJY1jNmo

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree