7 Years manufacturer BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel in Gabon

7 Years manufacturer
 BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel in Gabon

Short Description:

BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of 7 Years manufacturer BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel in Gabon, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.


    BS EN 42crmo4 Alloy Steel

    is a common chromium-molybdenum steel that usually used after quenched
    and tempered, with high intensity, high hardenability. BS EN 42CrMo4
    round steel has better performance than 34CrMo4 steel due to the carbon
    and chromium content is higher. 42CrMo4 alloy steel

    has higher strength and hardenability. The 42CrMo4 alloy material also
    has high fatigue strength and good low-temperature impact toughness. The

    temper brittleness is not obvious.

    Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more

    preferable in terms of material properties. EN 42CrMo4 alloy
    engineering steel materials have been widely used in automotive driving
    elements. Otai Steel is able to supply you prime quality of 42CrMo4
    alloy steel materials with wide range.

    1.42CrMo4 Alloy Steel Supply Range

    42CrMo4 Round bar Sizes: 80mm – 1200mm
    Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
    Other steel shape and sizes available according to your requirements.

    Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.

    2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents

    BS EN 10250 Material No. DIN ASTM A29 JIS G4105 BS 970-3-1991 BS 970-1955 AS 1444 AFNOR
    42CrMo4 1.7225 38HM 4140 SCM440 708M40 EN19A 4140 42CD4

    3.42CrMo4 Alloy Steel Chemical Composition

    42CrMo4/1.7225 C Mn Si P S Cr Mo
    0.38-0.45 0.60-0.90 0.40 max 0.035 max 0.035 max 0.90-1.20 0.15-0.30

    4. DIN 42CrMo4 Alloy Steel Mechanical Properties

    Size Ø mm Yield stress
    Rp0.2,N/nn2, min.
    Ultimate tensile Stress,
    Rm,N/nn2
    Elongation
    A5,%, min.
    Hardness HB Toughness
    KV, Joule, min.
    <40 750 1000-1200 11 295-355 35 at 20ºC
    40-95 650 900-1100 12 265-325 35 at 20ºC
    >95 550 800-950 13 235-295 35 at 20ºC

    5. Heat Treatment of 42CrMo4 Steels

    Annealing of 42CrMo4 Steels

    • Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;

    • Cool slowly in the furnace to the temperature 480°;

    • Complete annealing the steel in the air.

    Quenched and Tempered (Q+T)

    • Heat 42CrMo4 steel slowly to 880°C;

    • Soak at this temperature then quench in oil;

    • Temper as soon as 42CrMo4 steel reach room temperature (20°C);

    • Heat uniformly to the suitable temperature of 560°C;

    • Withdraw the 42CrMo4 material from the furnace and cool in the air.

    6. Forging of 42CrMo4 Alloy Steel

    • Preheat 42CrMo4 engineering steel uniformly and slowly;

    • Increase the forging temperature up to 1150-1200°C.

    • Always keep the forging temperature above at least 850°C

    7.Weldability

    Engineering

    steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
    strongly recommended; the upper limit should not be exceeded because of
    risk for deterioration of the chrome layer.

    Alloy steel 42CrMo4
    can be friction welded. However, precautions are necessary so as to
    limit the formation of undesirable microstructures in the welded zone.

    8.Application of 42CrMo4 Alloy Steels

    EN

    42CrMo4 alloy steel is widely used for engineering steel purpose, such
    as: making various kinds of machinery, automobile, mining spare part,
    the gearwheel of the engine, the driving gear of supercharger, the
    connecting rob, the pinchock under the high pressure, parts for power
    train applications, cold formed fastener components, shafts, gears,
    drill collars for the oil exploration, etc.

  • Previous:
  • Next:



  • Watch the next episode about San Francisco becoming a zero waste city: https://www.youtube.com/watch?v=Cg3OA1s8-SI&list=UUJsSEDFFnMFvW9JWU6XUn0Q
    As urban populations continue to rise, innovators are looking beyond traditional farming as a way to feed everyone while having less impact on our land and water resources. Vertical farming is one solution that’s been implemented around the world. Vertical farms produce crops in stacked layers, often in controlled environments such as those built by AeroFarms in Newark, New Jersey. AeroFarms grows a variety of leafy salad greens using a process called “aeroponics,” which relies on air and mist. AeroFarms’ crops are grown entirely indoors using a reusable cloth medium made from recycled plastics. In the absence of sun exposure, the company uses LED lights that expose plants to only certain types of spectrum. AeroFarms claims it uses 95% less water than a traditional farm thanks to its specially designed root misting system. And it is now building out a new 70,000 square foot facility in a former steel mill. Once completed, it’s expected to grow 2 million pounds of greens per year, making it the largest indoor vertical farm in the world.

    For more on AeroFarms: http://aerofarms.com/

    Join the Seeker community!
    Twitter: https://twitter.com/SeekerNetwork
    Facebook: https://www.facebook.com/pages/Seeker-Network/872690716088418?ref=hl
    Instagram: http://instagram.com/seekernetwork
    Tumblr: http://seekernetwork.tumblr.com
    App – iOS http://seekernetwork.com/ios
    App – Android http://seekernetwork.com/android



    THE Tool:
    –90° ramping milling cutter for HSC milling
    –Max. chopping depth 15 mm or 20 mm
    –Diameter 25–80 mm or 1–3
    –High level of radial runout precision
    –Finely balanced standard entire body
    –Different interfaces this sort of as HSK, ScrewFit, parallel shank or bore adaptor

    THE INDEXABLE INSERTS:
    –Two sizes of indexable insert with several corner radii
    • ZDGT1504 …R-K85 (R = .4–4. mm)
    • ZDGT2005…R-K85 (R = .8–6.4 mm)
    –Positive standard form with particular geometry for pocket milling
    –Centrifugal pressure safety at the call surface area for HSC machining
    –New milling quality WNN15 with higher device lifetime

    THE Software:
    –For machining non-ferrous metals (ISO N) this sort of as aluminium wrought alloys or aluminium lithium alloys
    –Structural elements in aircraft building
    –Rough milling and semi-ending of pockets with higher chip volume

    Rewards FOR YOU:
    –High level of method dependability even at highest speeds many thanks to centrifugal pressure safety
    –Short machining time due to highest steel elimination price

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck