7 Years manufacturer AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory for Nairobi

7 Years manufacturer
 AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory for Nairobi

Short Description:

AISI 4340 steel is a medium carbon, low alloy steel known for its toughness andstrength in relatively large sections. AISI 4340 is also one kind ofnickel chromium molybdenum steels. 4340 alloy steel is generallysupplied hardened and tempered in the tensile range of 930 – 1080 Mpa.Pre hardened and tempered 4340 steels can be further surface hardened by flame or induction hardening and by nitriding. The 4340 steel has goodshock and impact resistance as well as wear and abrasion resistanc...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    "Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for 7 Years manufacturer AISI 4340 Steel | 36CrNiMo4 | 1.6511 | EN24 | 817M40 | SNCM439 Factory for Nairobi, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.


    AISI 4340 steel
    is a medium carbon, low alloy steel known for its toughness and
    strength in relatively large sections. AISI 4340 is also one kind of
    nickel chromium molybdenum steels. 4340 alloy steel is generally
    supplied hardened and tempered in the tensile range of 930 – 1080 Mpa.
    Pre hardened and tempered 4340 steels can be further surface hardened by
    flame or induction hardening and by nitriding. The 4340 steel has good
    shock and impact resistance as well as wear and abrasion resistance in
    the hardened condition. AISI 4340 steel properties offer good ductility
    in the annealed condition, allowing it to be bent or formed. Fusion and
    resistance welding is also possible with our 4340 alloy steel. ASTM 4340
    material is often utilized where other alloy steels do not have the
    hardenability to give the strength required. For highly stressed parts
    it is excellent choice. AISI 4340 alloy steel can also be machined by
    all customary methods.

    Due to availability the ASTM 4340 grade steel is often substituted
    with European based standards 817M40/EN24 and 1.6511/36CrNiMo4 or Japan
    based SNCM439 steel. You have the detailed data of 4340 steel below.

    1. AISI 4340 Steel Specification and Relevant Standards

    Country USA Britain Britain Japan
    Standard ASTM A29 EN 10250 BS 970 JIS G4103
    Grades 4340 36CrNiMo4/
    1.6511
    EN24/817M40 SNCM 439/SNCM8

    2. ASTM 4340 Steels And Equilvalents Chemical Composition

    Standard Grade C Mn P S Si Ni Cr Mo
    ASTM A29 4340 0.38-0.43 0.60-0.80 0.035 0.040 0.15-0.35 1.65-2.00 0.70-0.90 0.20-0.30
    EN 10250 36CrNiMo4/
    1.6511
    0.32-0.40 0.50-0.80 0.035 0.035 ≦0.40 0.90-1.20 0.90-1.2 0.15-0.30
    BS 970 EN24/817M40 0.36-0.44 0.45-0.70 0.035 0.040 0.1-0.40 1.00-1.40 0.20-0.35
    JIS G4103 SNCM 439/SNCM8 0.36-0.43 0.60-0.90 0.030 0.030 0.15-0.35 1.60-2.00 0.60-1.00 0.15-0.30

    3. AISI Alloy 4140 Steel Mechanical Properties

    Mechannical Properties

    (Heat Treated Condition )

    Condition Ruling section
    mm
    Tensile Strength MPa Yield Strength
    MPa
    Elong.
    %
    Izod Impact
    J
    Brinell
    Hardness
    T 250 850-1000 635 13 40 248-302
    T 150 850-1000 665 13 54 248-302
    U 100 930-1080 740 12 47 269-331
    V 63 1000-1150 835 12 47 293-352
    W 30 1080-1230 925 11 41 311-375
    X 30 1150-1300 1005 10 34 341-401
    Y 30 1230-1380 1080 10 24 363-429
    Z 30 1555- 1125 5 10 444-

    Thermal Properties

    Properties Metric Imperial
    Thermal expansion co-efficient (20°C/68°F, specimen oil hardened, 600°C (1110°F) temper 12.3 µm/m°C 6.83 µin/in°F
    Thermal conductivity (typical steel) 44.5 W/mK 309 BTU in/hr.ft².°F

    4. Forging of 4340 Alloy Steel

    Preheat
    the steel 4340 first, heat up to 1150°C – 1200°C maximum for forging,
    hold until temperature is uniform throughout the section.

    Do not forge
    below 850 °C. 4340 has good forging characteristics but care must be
    taken when cooling as the steel shows susceptibility to cracking.
    Following forging operation the work piece should be cooled as slowly as
    possible. And cooling in in sand or dry lime is recommended etc.

    5. AISI 4340 Steel Grade Heat Treatment

    • Stress Relieving

    For
    pre-hardened steel stress relieving is achieved by heating steel 4340
    to between 500 to 550°C. Heat to 600 °C – 650 °C, hold until temperature
    is uniform throughout the section, soak for 1 hour per 25 mm section,
    and cool in still air.

    • Annealing

    A
    full anneal may be done at 844°C (1550 F) followed by controlled
    (furnace) cooling at a rate not faster than 10°C (50 F) per hour down to
    315°C (600 F). From 315°C 600 F it may be air cooled.

    • Tempering

    AISI
    4340 alloy steel should be in the heat treated or normalized and heat
    treated condition before tempering. The tempering temperature for
    depends upon the strength level desired. For strength levels in the 260 –
    280 ksi range temper at 232°C (450 F). For strength in the 125 – 200
    ksi range temper at 510°C (950 F). And don’t temper the 4340 steels if
    it is in the 220 – 260 ksi strength range as tempering can result in
    degradation of impact resistance for this level of strength.

    Tempering should be avoided if possible within the range 250 °C – 450 °C due to temper brittleness.

    • Flame or Induction Hardening

    As mentioned above, pre-hardened and tempered 4340 steel bars or plates can be further surface hardened by either the flame or induction hardening
    methods resulting in a case hardness in excess of Rc 50. AISI 4340
    steel parts should be heated as quickly as possible to the austenitic
    temperature range (830 °C – 860 °C) and required case depth followed by
    an immediate oil or water quenching, depending upon hardness required,
    workpiece size/shape and quenching arrangements.

    Following
    quenching to hand warm, tempering at 150°C – 200°C will reduce stresses
    in the case with minimal effect on its hardness.

    All de-carburised surface material must first be removed to ensure best results.

    • Nitriding

    Hardened
    and tempered 4340 alloy steel can also be nitrided, giving a surface
    hardness of up to Rc 60. Heat to 500°C – 530°C and hold for sufficient
    time (from 10 to 60 hours) to develop the depth of case. Nitriding
    should be followed by slow cooling (no quench) reducing the problem of
    distortion. The nitrided grade 4340 materials can therefore be machined
    to near final size, leaving a small grinding allowance only. The tensile
    strength of the 4340 steel material core is usually not affected since
    the nitriding temperature range is generally below the original
    tempering temperature employed.

    Surface hardness achievable is 600 to 650HV.

    6. Machinability

    Machining
    is best done with the alloy steel 4340 in the annealed or normalized
    and tempered condition. It can be readily machined by all conventional
    methods such as sawing, turning, drilling etc. However in the high
    strength conditions of 200 ksi or greater the machinability is only from
    25% to 10% that of the alloy in the annealed condition.

    7. Welding

    Welding
    of steel 4340 in the hardened and tempered condition (as normally
    supplied), is not recommended and should be avoided if at all possible,
    because of the danger of quench cracking, as the mechanical properties
    will be altered within the weld heat affected zone.

    If welding
    must be carried out, pre-heat to 200 to 300°C and maintain this while
    welding. Immediately after welding stress relieve at 550 to 650°C, prior
    to hardening and tempering.

    If welding in the hardened and
    tempered condition is really necessary, then the work piece, immediately
    on cooling to hand warm, should be if possible stress relieved at 15 °C
    below the original tempering temperature.

    8. Application of 4340 Steel

    AISI
    4340 steel is used in most industry sectors for applications requiring
    higher tensile/yield strength than 4140 steel can provide.

    Some typical applications such as:

    • Aircraft Landing Gear

    • Automotive,

    • Oil and Gas Drilling,

    • Forging,

    • Warm and Cold Forming,

    • Machine Building,

    • Transfer Systems, like power transmission gears and shafts.

    • General
      engineering industries and structural use applications, such as: heavy
      duty shafts, gears, axles, spindles, couplings, pins, chucks, molds etc.

  • Previous:
  • Next:



  • Shortcut to find square of any number. Limited Process to Come across Sq. of a number making use of this Maths methods.This is a quite Very simple Trick to Work out square of any number. This is a Maths Methods for acquiring squares with relieve. These aptitude methods make you to compute Sq. of any number quickly. For additional aptitude methods for placements keep on your stop by with us.
    Will not squander your time in any evaluation by executing it squares manually, In this Video we will share Very simple Shortcut to find Sq. of a number. Use this shortcut system to find squares of any number as a outcome you have additional time in the evaluation to solve other Maths complications.

    Aptitude Methods for Aggressive tests & Placement. We Govt. Jobs Portal ( WWW.GovtJobsportal.IN) will share additional maths methods like this in the forthcoming video clips. We suggest you all fascinated candidates who adore these forms of Maths Methods to Come across Sq. of any number , to subscribe our channel for additional Reasoning methods & Maths Methods in long term. Subscribe channel from below button for additional aptitude methods and strategies.

    Essentially we share this maths methods for bank po exam oriented. This maths methods for quickly calculation is quite important for all the students. So watch this Maths methods tutorial quite meticulously to recognize the principle deeply. In long term we will share additional maths methods for aggressive tests. Together with the Maths methods we will also share reasoning methods for aggressive tests. Individuals who want to understand reasoning methods for aggressive tests can also subscribe this channel. So remain linked with us for additional maths methods for aggressive tests as very well as for reasoning methods.

    Regard:

    http://WWW.GovtJobsPortal.IN

    http://WWW.DaoilyGK.IN

    -~-~~-~~~-~~-~-
    You should watch: “Shortcut to find dice root of any number -How To Come across Cube root methods”

    -~-~~-~~~-~~-~-



    M8x1.25mm Female Rose Joint Right Thread Bronze Liner Perfor
    รายละเอียดเพิ่มเติม : http://myriann.us/6z9jxx

    M8x1.25mm Female Rose Joint Right Thread Bronze Liner Performance Rod End 8mmคุณผู้หญิงกำลังอ่านความคิดเห็นสินค้า M8x1.25mm Female Rose Joint Right Thread Bronze Liner Performance Rod End 8mm เพื่อช่วยให้รวดเร็วขึ้น อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีสิ่งของ ที่ท่านต้องการ พร้อมให้คำแนะนำร้านค้าขาย สินค้า M8x1.25mm Female Rose Joint Right Thread Bronze Liner Performance Rod End 8mm {ราคาดีที่สุด|ราคาถูกที่สุด|ราคาถูก|ราคาที่คุณสัมผัสได้ แนะนำให้นายท่าน M8x1.25mm Female Rose Joint Right Thread Bronze Liner Performance Rod End 8mm
    สินค้าที่คุณซื้อได้ ด้วยความสบายใจ สินค้าคุณภาพ ราคาถูก ลดถึง80% จัดส่งถึงบ้านฟรี เก็บเงินปลายทางได้ M8x1.25mm Female Rose Joint Right Thread Bronze Liner Performance Rod End 8mm Condition: 100% Brand New Material:alloy steel surface zinc plating Ball: 52100 Bearing Steel Heat Treated Hard Chrome Plated Precision Ground Body: Carbon Steel Corrosion Resistant Protective Coated Race: Bronze Lined Features: Metal to Metal Support for Heavy Shock Loads No Maintenance Required Inserts are in two half bronze rings Inner ball ring bearing steel polish hard- chromed plated Right hand thread Fitment:Fit for Budget Motorsport Marine and Industrial Applications amp;nbsp; amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp; Weamp;nbsp; also have 6mm10mm12mm in our store please contact with us if you need it. amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp; amp;nbsp;…

    บริการส่งฟรี สั่งซื้อพร้อมส่วนลด เก็บเงินปลายทาง http://myriann.us/6z9jxx
    ———————————————————————————-
    ค้นหายอดนิยม : M8x1.25mm, Female, Rose, Joint, Right, Thread, Bronze, Liner, Performance, Rod, End, 8mm, M8x1.25mm Female Rose Joint Right Thread Bronze Liner Performance Rod End 8mm

    M8x1.25mm #Female #Rose #Joint #Right #Thread #Bronze #Liner #Performance #Rod #End #8mm #M8x1.25mm Female Rose Joint Right Thread Bronze Liner Performance Rod End 8mm

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup