7 Years manufacturer AISI 1053 Carbon Steel (UNS G10530) in French

7 Years manufacturer
 AISI 1053 Carbon Steel (UNS G10530) in French

Short Description:

Chemical Composition The chemical composition of AISI 1053 carbon steel is outlined in the following table. Element Content (%) Iron, Fe 98.36-98.82 Manganese, Mn 0.7-1.0 Carbon, C 0.48-0.55 Sulfur, S 0.05 Phosphorous, P 0.04 Physical Properties The physical properties of AISI 1053 carbon steel are tabulated below. Properties Metric Imperial Density 7.7-8.03 g/cm3 0.278-0.290 l...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for 7 Years manufacturer AISI 1053 Carbon Steel (UNS G10530) in French, Standing still today and looking into the future, we sincerely welcome customers all over the world to cooperate with us.


    Chemical Composition

    The chemical composition of AISI 1053 carbon steel is outlined in the following table.

    Element Content (%)
    Iron, Fe 98.36-98.82
    Manganese, Mn 0.7-1.0
    Carbon, C 0.48-0.55
    Sulfur, S 0.05
    Phosphorous, P 0.04

    Physical Properties

    The physical properties of AISI 1053 carbon steel are tabulated below.

    Properties Metric Imperial
    Density 7.7-8.03 g/cm3 0.278-0.290 lb/in3

    Mechanical Properties

    The following table shows mechanical properties of AISI 1053 carbon steel.

    Properties Metric Imperial
    Elastic modulus 190-210 GPa 29700-30458 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30

  • Previous:
  • Next:



  • ASTM A213 T22 Seamless Ferritic and Austenitic Alloy-Metal Boiler, Superheater, Warmth-Exchanger Tubes.
    Grades made up of the letter H in their designation have requirements distinctive from these of identical grades not made up of the letter H.
    These distinctive requirements provide greater creep-rupture power than commonly achievable in identical grades without having these distinctive requirements. ASTM A213 T22 tubes shall be made by the seamless approach and shall be either very hot concluded or cold concluded, as specified. Quality TP347HFG shall be cold concluded. Warmth procedure shall be finished independently and in addition to heating for very hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless metal tubes shall be furnished in the heat-taken care of condition. Alternatively, straight away soon after very hot forming, whilst the temperature of the tubes is not a lot less than the bare minimum option temperature, tubes may possibly be separately quenched in water or fast cooled by other usually means. Stress examination, hardness examination, flattening examination, and flaring examination shall be finished to just about every tube. Also, just about every tube shall be subjected to the nondestructive electric examination or hydrostatic examination.
    ASTM A209 Through A213
    Other conventional specifications incorporate the types of A209 seamless carbon-molybdenum alloy-metal boiler and superheater tubes A210 seamless medium-carbon metal boiler and superheater tubes and A213 seamless ferritic and austenitic metal boiler, superheater and heat-exchanger tubes.
    Piping wall thicknesses array from 1/2 inch to five inches. A213 grades also have the letter H or M assigned, which improvements the composition and specifications for that series.
    This summary is a short summary of the referenced conventional. It is informational only and not an formal portion of the conventional the comprehensive text of the conventional alone should be referred to for its use and application.
    ASTM does not give any guarantee express or implied or make any illustration that the contents of this summary are accurate, finish or up to date.
    Wall thickness is average wall or according to ASME SA530.
    Notes for Bend Examination:
    For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7. or a lot less shall be subjected to the bend examination as a substitute of the flattening examination.
    Other pipe whose diameter equals or exceeds NPS 10 may possibly be specified the bend examination in location of the flattening examination subject matter to the acceptance of the purchaser.
    The bend examination specimens shall be bent at place temperature via one hundred eighty without having cracking on the outdoors of the bent part.
    Packing:
    Packed in wooden crates, wrapped in plastic, and suitably secured for sea-worthly shipping and delivery or as asked for.
    Both of those ends of just about every crate will suggest the order no., heat no., dimensions, fat and bundles or as asked for.
    Shipping and delivery:
    Pipes are supplied in hexagonal bundles or spherical bundles tied with metal strip.
    Excess weight of bundle – up to 5000 kg on ask for of client.
    Just about every bundle is furnished with 3 tags.

    We are manufacturer of ASTM A213 T22 alloy tube and supply high high quality ASTM A213 T22 alloy tube in both equally huge and smaller portions around the world and supply you the most effective rates in the marketplace.

    We have a workforce of expert experts with years of knowledge in manufacturing. (www.sunnysteel.com)

    Sunny Metal Company Ltd.

    0086-21-33780199
    No. 273, Siping Highway, Shanghai, 200081, China
    Sum Xuu
    sumxu@163.com



    T-FIBER 220 Fiber laser for tube processing up to 220mm diameter and 150×150 square.

    Equipped with a bundle loader with 4Ton capacity, upt to 7 meters long tubes.

    Equipped with an unloader for tubes up to 3,5 meters long.

    More info on http://www.omp-group.it

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart