7 Years Factory Carbon Steel Wholesale to San Francisco

7 Years Factory
 Carbon Steel Wholesale to San Francisco

Short Description:

Carbon steels contain trace amounts of alloyingelements and account for 90% of total steel production. Carbon steelscan be further categorized into three groups depending on their carboncontent: Low Carbon Steels/Mild Steels contain up to 0.3% carbon Medium Carbon Steels contain 0.3 – 0.6% carbon High Carbon Steels contain more than 0.6% carbon


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for 7 Years Factory Carbon Steel Wholesale to San Francisco, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!


    Carbon steels contain trace amounts of alloying
    elements and account for 90% of total steel production. Carbon steels
    can be further categorized into three groups depending on their carbon
    content:

    • Low Carbon Steels/Mild Steels contain up to 0.3% carbon

    • Medium Carbon Steels contain 0.3 – 0.6% carbon

    • High Carbon Steels contain more than 0.6% carbon

  • Previous:
  • Next:



  • This is a video demonstration of the Northern Industrial Portable Hydraulic Electric Rebar/Steel Rod Cutter. The Northern Industrial portable hydraulic electric rebar/steel rod cutter cuts through steel rods and rebar from 5/32in. up to 5/8in. thick quickly and easily.

    For more information visit NorthernTool.com today

    http://www.northerntool.com/shop/tools/product_200356572_200356572



    Triplex plastic cap punching die set used with an Airmite air press. Punches are modified 15mm gage pins and the dies are modified 19/32 drill bushing allowing for a .003″ total clearance. Punch and die holders are hardened 4150 steel. Bolsters and stripper plate are ground tool steel. Guide rails are 5/8″ drill rod and rail guides are Drill bushings. The cap nests are aluminum. The dies allow for about .05″ sharpening and are supported buy riser bushings which can be replace with tall ones for additional die sharpening. The plastic slug waste falls though the slots in the front of the lower bolster. Air pressure is 100 PSI.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star