6 Years manufacturer BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory for Slovak Republic
BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for 6 Years manufacturer BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory for Slovak Republic, sincerely look forward to serving you in the near future. You are sincerely welcome to visit our company to talk business face to face with each other and establish long-term co-operation with us!
BS ENAlloy Steel
is a common chromium-molybdenum steel that usually used after quenched
and tempered, with high intensity, high hardenability. BS EN 42CrMo4
round steel has better performance than 34CrMo4 steel due to the carbon
and chromium content is higher.
has higher strength and hardenability. The 42CrMo4 alloy material also
has high fatigue strength and good low-temperature impact toughness. The
temper brittleness is not obvious.
Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more
preferable in terms of material properties. EN 42CrMo4 alloy
engineering steel materials have been widely used in automotive driving
elements. Otai Steel is able to supply you prime quality of 42CrMo4
alloy steel materials with wide range.
1.42CrMo4 Alloy Steel Supply Range
42CrMo4 Round bar Sizes: 80mm – 1200mm
Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
Other steel shape and sizes available according to your requirements.
Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.
2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents
|BS EN 10250||Material No.||DIN||-3-1991||BS 970-1955||AS 1444||AFNOR|
3.42CrMo4 Alloy Steel Chemical Composition
|0.38-0.45||0.60-0.90||0.40 max||0.035 max||0.035 max||0.90-1.20||0.15-0.30|
4. DIN 42CrMo4 Alloy Steel Mechanical Properties
|Size Ø mm||Yield stress
|Ultimate tensile Stress,
KV, Joule, min.
|<40||750||1000-1200||11||295-355||35 at 20ºC|
|40-95||650||900-1100||12||265-325||35 at 20ºC|
|>95||550||800-950||13||235-295||35 at 20ºC|
5. Heat Treatment of 42CrMo4 Steels
Annealing of 42CrMo4 Steels
Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;
Cool slowly in the furnace to the temperature 480°;
Complete annealing the steel in the air.
Quenched and Tempered (Q+T)
Heat 42CrMo4 steel slowly to 880°C;
Soak at this temperature then quench in oil;
Temper as soon as 42CrMo4 steel reach room temperature (20°C);
Heat uniformly to the suitable temperature of 560°C;
Withdraw the 42CrMo4 material from the furnace and cool in the air.
6. Forging of 42CrMo4 Alloy Steel
Preheat 42CrMo4 engineering steel uniformly and slowly;
Increase the forging temperature up to 1150-1200°C.
Always keep the forging temperature above at least 850°C
steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
strongly recommended; the upper limit should not be exceeded because of
risk for deterioration of the chrome layer.
Alloy steel 42CrMo4
can be friction welded. However, precautions are necessary so as to
limit the formation of undesirable microstructures in the welded zone.
8.Application of 42CrMo4 Alloy Steels
42CrMo4 alloy steel is widely used for engineering steel purpose, such
as: making various kinds of machinery, automobile, mining spare part,
the gearwheel of the engine, the driving gear of supercharger, the
connecting rob, the pinchock under the high pressure, parts for power
train applications, cold formed fastener components, shafts, gears,
drill collars for the oil exploration, etc.
Step by step procedure of how to choose material properties from library (steel, composite, plastic, elastic, )in ANSYS 13 workbench.
visit http://www.teachkart.com/ for complete tutorial.
More details and get special offer today : http://po.st/4GcFYP
The Bosch Power Drill 1033VSR & 1034VSR High Torque drills feature a 1/2-inch pistol-grip, heavy-duty, high-amperage pro drill. Featuring an 8 amp motor and 1/2-inch keyed chuck. The 1033VSR also offers a variable-speed trigger with reversing switch, in addition to an ergonomic handle. The unit’s magnesium front housing delivers increased durability. While the 8-foot rubber cord gives the drill added versatility. Learn more about the capabilities of the Bosch 1033VSR & 1034VSR 1/2″ High-Speed and High Torque Drills below:
•Heavy duty, keyed chuck
•8.0 Amp all ball bearing motor, 0-850 RPM
•Variable speed, soft grip trigger, with reversing switch — for greater control
•Two finger trigger design and lock-on button — for ease of operation
•Ergonomic handle with soft grip — for increased comfort
•Precision cut steel gears
•Magnesium front housing — for increased durability
•Extra long 8′ rubber cord with 3-prong grounded plug
•360° auxiliary handle with optional depth gauge
Check out all the details of the Bosch 1033VSR & 1034VSR 1/2″ High-Speed and High Torque Drills and view the line of Bosch’s Drills here: http://po.st/4GcFYP
To learn more about the 1033VSR & 1034VSR 1/2″ High-Speed and High Torque Drills specifically, click here:
To access the free Bosch apps for iPhone and Android, click here: http://po.st/4GcFYP
Connect with Bosch Power Tools on Social Media: