50% OFF Price For AISI304| SUS304| EN1.4948 Johor

50% OFF Price For
 AISI304| SUS304| EN1.4948 Johor

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for 50% OFF Price For AISI304| SUS304| EN1.4948 Johor, Adhering to the business principle of mutual benefits, we have won good reputation among our customers because of our perfect services, quality products and competitive prices. We warmly welcome customers from home and abroad to cooperate with us for common success.


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • Charley Varrick is a small-time crook who outfoxes the Mob in this fast-paced offbeat thriller directed by Don Siegel. Academy Award® winner Walter Matthau stars in a rare dramatic role, along with the powerful Joe Don Baker, as a tough Mafia hitman. Charley robs small banks with small payrolls. That keeps him out of trouble until he stumbles onto the Mob’s secret stash. The chase is on as the Big Boys go after the “Last of the Independents.” It’s a heart-pounding ride that builds to a fiery airborne climax as Charley makes his last desperate run for the Mexican border and safety. 1973 Universal Studios. All Rights Reserved.



    If You Are Looking For Quality LASER Cutting Services in Dubai United Arab Emirates. Contact Us At:

    Laser cutting of mild steel – Stainless steel laser cutting by Wisely Laser mixing metal & non-metal CO2 laser cutting machine Hallie was very proud of her decorations and she couldnt wait for all her friends to see striation free laser cutting of mild steel sheets

    3000w fiber laser cutting mild steel 10mm 12mm 20mm.

    Laser Cutting Machine For 10mm Carbon Steel,1 Kw Laser,10mm Carbon Steel Laser Cutting Machine,1000 Watt Laser from -Jinan Bodor CNC Machine Co

    Elimination of striation in laser cutting of mild steel

    Chen, The effects of gas composition on the CO2 laser cutting of mild steel, J Nimeke: Fiber Laser Cutting of Mild Steel
    Laser cutting and laser fine cutting are applied for different kinds of materials where complex contours demand precise, fast and force-free processing Q-switched fiber laser up to 100 W
    100W CO2 Laser Cutting Machine Laser Cutter

    10mm carbon steel laser cutting machine.

    2 kW CO2 laser with a 2 kW fiber laser cutting machine

    Figure 1: A schematic of the cut zone when laser cutting stainless steel

    yag lamp pump laser cutting machine for mild steel.

    CO2 Laser Cutting Metal 4m x 2m max sheet size up to 25mm thick Design hot sale laser metal sheet cutting machine price · Dongguan Zengshi Leather Machinery Factory Low Price Carbon Steel Laser Cutting Machine 500W LM2513G, Shandong Leiming CNC Laser Equipment Co
    1000W IPG Fiber Laser Cutting Machine XJGC 150300 DT
    Hobby use non metal co2 laser cutting machine for sale with CE,FDA certificate · Jinan Jindiao Technology Co
    Cut big thickness laser cutting machine with good price

    ‘s Pipe laser cutting machine CTF brochure on DirectIndustry 500W 1000W 2000W Fiber Laser Cutter Carbon Steel Hot Keywords:metal laser cutter 500W fiber laser cutter pipes laser cutter metal sheet and pipes laser cutter pipes fiber laser cutter 500W fiber laser cutter 1000W Fiber Laser cutter for metal cutting solutions · 1000W fiber laser cutting machine samples Stainless steel laser cutting machine price, Thin metal laser cutter price

    Product name:3000W Fiber laser cutting machine
    Here at Yorkshire Profiles we are able to provide mild steel Laser cutting & Fabrication Services in the UK

    Large production of mild steel laser cut parts
    Laser cut mild steel is the staple for us – we cut more of this than any other material
    Laser Cutting Sheet Metal Services from Saint Ann’s Sheet Metal, based in the UK
    CNC Sheet Metal Laser Cutting Machine Price/2000w IPG fiber ss/cs/galvanized steel laser cutting machine price · Jinan Link Manufacture & Trading Co Carbon steel Laser cutting for 4mm

    Stainless Steel Laser Cutting Capabilities LT8 Tube Laser Cutting machine from BLM Group

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree