5 Years manufacturer Metal Forms Factory in Melbourne
Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker) Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg Discs, pu...
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
5 Years manufacturer Metal Forms Factory in Melbourne, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
Steel products can also be divided by their shapes. We can produce in the following shapes:
|Length||up to 16,000 mm|
|Round||from 80 to 1,200 mm Ø|
|Square||from 140 mm to 460 mm|
|Flat||from 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
|Barrel/flange diameter||up to 1.600 mm Ø|
|Length||up to 15.000 mm|
|Weight||from 10 kg to 35.000 kg|
Discs, punched discs, hubs
|Diameter||up to 1.200 mm
(smaller dias correspondingly thicker)
|Thickness||up to 600 mm|
Blocks, plates (forged three-dimensionally)
|Length||max. 6.000 mm|
|Width||max. 1.800 mm|
|Thickness||max. 1.000 mm
(in case of smaller thickness greater length and width)
|Weight||max. 30.000 kg|
Forged tubes, cylinders and other hollow forgings
|Inner diameter||160 mm to 600 mm|
|Length||up to 1,200 mm|
|Weight||up to 10.000 kg|
|Outer diameter||up to 2.400 mm|
|Height||up to 2.200 mm|
|Weight||up to 25.000 kg|
Seamless rolled rings
|Outer diameter||up to 3.500 mm|
|Height||up to 800 mm|
|Weight||10 kg to 8.000 kg|
We can also produce according to clients' designs. If you have your own design, just feel free to contact us.
SSF-6 melts at a lower temperature than most silver solders, allowing you to make repairs without warping the base metal. Mike uses a propane torch to join the 2 pieces, of brass, but a MAPP gas or oxyacetylene would work as well.
SSF-6 is as strong as a MIG, without grinding or machining. Notice the beautiful end result.
For more videos and information, or to order, visit http://MuggyWeld.com
Please read all instructions prior to use at: http://muggyweld.com/packets/ssff6ssq6postsale.pdf
Please visit http://www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at http://muggyweld.com/safety-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.
MSDS sheets available with purchase from MuggyWeld.com, upon request.
High Speed, High Precision for CNC Machining
- Synchro Tap has an optimized short thread length and high thread reliefs.
- We guarantee you shorter cycle time, higher productivity, and longer tool life.
- YG-1’s own special geometry prevents over-sized thread and enables to manufacture superior quality of threading with consistence.
- Best Solution for CNC Threading
- Best Performance for General Purpose
- Longer tool life and shorter Cycle Time
- High Productivity by High Speed Machining
- Consistency in Threading Quality
- Prevents chip packing by applying short thread length