5 Years Factory Stainless Steel Manufacturer in Bogota

5 Years Factory
 Stainless Steel Manufacturer in Bogota

Short Description:

Stainless steels generally contain between 10-20%chromium as the main alloying element and are valued for high corrosionresistance. With over 11% chromium, steel is about 200 times moreresistant to corrosion than mild steel. These steels can be divided into three groups based on their crystalline structure: Austenitic: Austenitic steels are non-magnetic and non heat-treatable, andgenerally contain 18% chromium, 8% nickel and less than 0.8% carbon. Austenitic steels form the largest po...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for 5 Years Factory Stainless Steel Manufacturer in Bogota, We sincerely look forward to hearing from you. Give us a chance to show you our professionalism and passion.


    Stainless steels generally contain between 10-20%
    chromium as the main alloying element and are valued for high corrosion
    resistance. With over 11% chromium, steel is about 200 times more
    resistant to corrosion than mild steel. These steels can be divided into

    three groups based on their crystalline structure:

    • Austenitic:

      Austenitic steels are non-magnetic and non heat-treatable, and
      generally contain 18% chromium, 8% nickel and less than 0.8% carbon. Austenitic steels

      form the largest portion of the global stainless steel market and are
      often used in food processing equipment, kitchen utensils and piping.

    • Ferritic: Ferritic steels contain trace amounts of nickel, 12-17% chromium, less than 0.1% carbon, along with other alloying elements, such as molybdenum, aluminum or titanium. These magnetic steels cannot be hardened with heat treatment, but can be strengthened by cold working.

    • Martensitic:

      Martensitic steels contain 11-17% chromium, less than 0.4% nickel and
      up to 1.2% carbon. These magnetic and heat-treatable steels are used in
      knives, cutting tools, as well as dental and surgical equipment.

  • Previous:
  • Next:



  • ––GOLDEN ANVIL––

    Music by Kevin McLeod, from Incompetech

    Materials that I’m using:

    • 1045 carbon steel
    • Hard wood
    • Stainless steel nails
    • Matte varnish
    * If you wish, you can use 1075 spring steel or stainless steel, they’re both very good

    Sizes and specifications:

    • Steel bar – 3mm thick, 5cm wide (1/8″ thick, 2″ wide)
    • Wood – min 2,5cm thick (min 1″ thick)
    • Nails – about 5cm long (about 2″ long)
    Thank you for watching, I’ll be posting more videos soon.



    HURCO VMX 42 HSi with 18000 rpm HSK Spindle running a 4-flute end mill with max. feedrate of 20.000 mm/min through heat treatable steel at TECHNISHOW 2014 at HAGRO booth with LMT-Tools. We used HYPERMAXX strategy of OPEN MIND. The HURCO WinMax control has ULTIMOTION with a 10.000 blocks LOOK AHEAD and a block processing speed of 0,4 milliseconds. Tool life was 19 pieces with one tool.
    More Information www.hurco.nl

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House