5 Years Factory ASTM 52100 Bearing Steel | 1.3505 | 100Cr6 | SUJ2 | EN31 Factory for Albania

5 Years Factory
 ASTM 52100 Bearing Steel | 1.3505 | 100Cr6 | SUJ2 | EN31 Factory for Albania

Short Description:

ASTM A295 is specification which covers 52100 high carbon bearing quality steelto be used in the manufacture of anti-friction bearings. And 52100 bearing steel is the most common steel grade in ASTM A295 standard for high-carbon anti-friction bearing steel. What is 52100 bearing steel? AISI/ASTM 52100 bearing steel is a high carbon, chromium containing low alloysteel that is through hardening and noted in particular for use asbearings. 52100 bearing steel is one kind of special steel with ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for 5 Years Factory ASTM 52100 Bearing Steel | 1.3505 | 100Cr6 | SUJ2 | EN31 Factory for Albania, items won certifications with the regional and international primary authorities. For far more detailed information, please contact us!


    ASTM A295
    is specification which covers 52100 high carbon bearing quality steel
    to be used in the manufacture of anti-friction bearings. And 52100 bearing steel is the most common steel grade in ASTM A295 standard for high-carbon anti-friction bearing steel.

    What is 52100 bearing steel?

    AISI/ASTM
    52100 bearing steel is a high carbon, chromium containing low alloy
    steel that is through hardening and noted in particular for use as
    bearings.

    52100 bearing steel is one kind of special steel with features of
    high wear resistance and rolling fatigue strength. High-carbon chromium
    bearing steel, engineering steel and some types of stainless steel and
    heat resistant steel are used as materials of bearings and for other
    purposes.

    Advantages of Chrome Bearing Steel 52100:

    • Superior hardness, 60-67 on Rockwell hardness scale (Rc) at room temperature

    • High carbon chrome alloy steel

    • Operates continually at temperatures up to 120°C

    • Used to produce precision ball bearings and roller bearings

    • Cost-effective

    • Long working life

    1. Relevant Steel Specification of ASTM 52100 Bearing Steel

    Country USA German Japan British
    Standard ASTM A295 DIN 17230 JIS G4805 BS 970
    Grades 52100 100Cr6/1.3505 SUJ2 535A99/EN31

    2. Chemical Composition of 52100 Bearing Steel and Equivalents

    Standard Grade C Mn P S Si Ni Cr Cu Mo
    ASTM A295 52100 0.93-1.05 0.25-0.45 0.025 0.015 0.15-0.35 0.25 1.35-1.60 0.30 0.10
    DIN 17230 100Cr6/1.3505 0.90-1.05 0.25-0.45 0.030 0.025 0.15-0.35 0.30 1.35-1.65 0.30
    JIS G4805 SUJ2 0.95-1.10 0.50 0.025 0.025 0.15-0.35 1.30-1.60
    BS 970 535A99/EN31 0.95-1.10 0.40-0.70 0.10-0.35 1.20-1.60

    3. Mechanical Properties of ASTM A295 52100 Bearing Steel

    Properties Metric Imperial
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel) 80 GPa 11600 ksi
    Elastic modulus 190-210 GPa 27557-30458 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Hardness, Brinell
    Hardness, Knoop (converted from Rockwell C hardness) 875 875
    Hardness, Rockwell C (quenched in oil from 150°C tempered) 62 62
    Hardness, Rockwell C (quenched in water from 150°C tempered) 64 64
    Hardness, Rockwell C (quenched in oil) 64 64
    Hardness, Rockwell C (quenched in water) 66 66
    Hardness, Vickers (converted from Rockwell C hardness) 848 848
    Machinability (spheroidized annealed and cold drawn. Based on 100 machinability for AISI 1212 steel) 40 40
    • 52100 Steel Physical Properties

    Properties Metric Imperial
    Density 7.81 g/cm3 0.282 lb/in³
    Melting point 1424°C 2595°F
    • 52100 Alloy Steel Thermal Properties

    Properties Metric Imperial
    Thermal expansion co-efficient (@ 23-280°C/73.4- 36°F, annealed) 11.9 µm/m°C 6.61 µin/in°F
    Thermal conductivity (typical steel) 46.6 W/mK 323 BTU in/hr.ft².°F

    4. Forging of A295 52100 Bearing Steel

    AISI
    52100 alloy steel is forged at 927 to 1205°C, and should not be forged
    below 925ºC. A post-forge equalization treatment is recommended at 745ºC
    for 4-6 hours followed by air cooling for SAE/AISI 52100 steel.

    6. Heat Treatment for ASTM 52100 Bearing Steel

    ASTM/AISI
    52100 alloy bearing steel is heated at 816°C followed by quenching in
    oil. Before performing this process, it is subjected to normalizing heat
    treatment at 872°C followed by slowly cooling in order to reduce the
    machining stress.

    Hot Working

    AISI 52100 bearing steels alloy can be hot worked at 205 to 538°C.

    Cold Working

    AISI 52100 bearing steel can be cold worked using conventional techniques in the annealed or normalized conditions.

    Annealing

    For spheroidize anneale, the following isothermal anneal is recommended:

    • 1500ºF (815ºC) for 3 hours

    • 1350ºF (735ºC) for 4 hours

    • 1250ºF (675ºC) for 3 hours

    • Slow cool to 1000ºF (540ºC) then air cool.

    Quenching

    AISI 52100 alloy bearing steel could be hardened by quenching in water from 801-829 degree or quench in oil from 816-842 degree.

    Tempering

    Temper to desired hardness as indicated by tempering curves after water or oil quench.

    5. Applications of 52100 Bearing Steel

    Alloy
    steel 52100 grade bearing steel is mainly used for the manufacture of
    aircraft bearings and other highly stressed parts. This steel grade
    52100 steel is preferably vacuum arc re-melted to give optimum
    performance.

    Typical applications: Bearing Manufacture, CV joints, ball screws, gauges, knife etc.

  • Previous:
  • Next:



  • โครง เลื่อยคันธนู ขนาด 24″ สีเขียว
    รายละเอียด : http://product.animechat.us/eMcHa

    โครง เลื่อยคันธนู ขนาด 24″ สีเขียว
    คุณผู้ชายกำลังรายละเอียดสินค้า โครง เลื่อยคันธนู ขนาด 24″ สีเขียว เพื่อช่วยแก้ไขปัญหา อยูใช่หรือไม่ ถ้าใช่คุณมาถูกที่แล้ว เรามีผลิตภัณฑ์ ที่ท่านต้องการ เรามีแหล่งซื้อ สินค้า โครง เลื่อยคันธนู ขนาด 24″ สีเขียว ราคาที่สัมผัสได้ แนะนำให้คุณผู้ชาย โครง เลื่อยคันธนู ขนาด 24″ สีเขียว
    โครงเลื่อยเหล็กกลม หนาพิเศษใบเลื่อยอย่างดี  คมเป็นพิเศษผลิตจาก HIGH CARBON STEEL THE BEST STEEL FROM U.S.A. OE857HLAA30MRGANTH-6501281 เครื่องใช้ ของตกแต่งบ้าน อุปกรณ์ปรับปรุงบ้าน …

    ค้นหายอดนิยม : โครง, เลื่อย, คันธนู, ขนาด, 24, สีเขียว, โครง เลื่อยคันธนู ขนาด 24″ สีเขียว

    โครง #เลื่อย #คันธนู #ขนาด #24 #สีเขียว #โครง เลื่อยคันธนู ขนาด 24″ สีเขียว

    โครง เลื่อยคันธนู ขนาด 24″ สีเขียว pantip ราคา true review ดีไหม รีวิว สเปค



    Forged Steel Bars in Canada By Sorel Forge.

    http://www.sorelforge.com/en/forged-steel-bars.aspx

    Sorel Forge produces forged bars sizes from 10 inches (255 mm) up to 36 inches (915 mm) in diameter in carbon and medium alloy steel grades.

    Forging is the process of shaping metal using extreme forces. The standard mode of classification of forged metals is by the heat at which they were manipulated: cold, warm or hot. Hot forging is normally performed at about 1200 degrees, warm forging at 650-700 degrees centigrade and cold forging at room temperature.

    Forging dates back to the 12th century, when hammers and anvils were used to shape metals for various purposes. Nowadays, industrial presses or hammers are the main tools, powered by compressed air, electricity, steam or hydraulics. Forging has the ability to create bars that are better than those machined or from cast steel. During the forging process, the grain of the metal is shifted to follow the contours of the shape of the steel. This can lead to improved strength characteristics and reduced brittleness.

    Sorel Forge produces forged bars sizes from 10 inches (255 mm) up to 36 inches (915 mm) in diameter in carbon and medium alloy steel grades.

    There are many types of forged steel bars. Some of the most common types are Carbon and Alloy Steel Hot Forged Bars, Cold Rolled Bright Bars and Carbon and Alloy Steel Hot Rolled Round Bars. The grade of manufacture is dictated by the cost and the application of the bars. Common grades of steel used include but are not limited to; 1045, 1018, 1020, 1030, 1035, 1070, 4130, 4140, 4145, 4150, 4320, 4330, 4330, 4340, 8620, 8630, 9310, A182F22, A350LF2, H13, SS410 etc . (PER AISI, SAE, ASTM A688, ASTM A322 and ASTM A182 as example).

    The quality of forged steel is described in terms of surface quality, internal quality, a uniform and fine austenitic grain size, good response to heat treatment, good toughness on impact and cleanliness. Normally, forged steel products require some finishing and the forging process is the first step in a two or more step process.

    Forged steel parts vary in size from less than a kilogram to over 500 metric tonnes. Huge steel bars are used a great deal in the oil and energy exploration sector where they need to be resistant to extreme forces.

    Other applications of forged steel bars are for steel plants, dam gates and crane manufacture, cable machine manufacture, hydraulic press manufacture, shafts and axles for drives in diverse industries, and the car manufacture industry. In many sectors, steel bars have become indispensable to standard operational processes.

    Sorel Forge adheres to strict quality control processes and we carry out a battery of regular tests on all our forged steel bars.

    http://www.sorelforge.com/en/contact-us.aspx

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree