40% OFF Price For ASTM 52100 Bearing Steel | 1.3505 | 100Cr6 | SUJ2 | EN31 in New York

40% OFF Price For
 ASTM 52100 Bearing Steel | 1.3505 | 100Cr6 | SUJ2 | EN31 in New York

Short Description:

ASTM A295 is specification which covers 52100 high carbon bearing quality steelto be used in the manufacture of anti-friction bearings. And 52100 bearing steel is the most common steel grade in ASTM A295 standard for high-carbon anti-friction bearing steel. What is 52100 bearing steel? AISI/ASTM 52100 bearing steel is a high carbon, chromium containing low alloysteel that is through hardening and noted in particular for use asbearings. 52100 bearing steel is one kind of special steel with ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for 40% OFF Price For ASTM 52100 Bearing Steel | 1.3505 | 100Cr6 | SUJ2 | EN31 in New York, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.


    ASTM A295
    is specification which covers 52100 high carbon bearing quality steel
    to be used in the manufacture of anti-friction bearings. And 52100 bearing steel is the most common steel grade in ASTM A295 standard for high-carbon anti-friction bearing steel.

    What is 52100 bearing steel?

    AISI/ASTM
    52100 bearing steel is a high carbon, chromium containing low alloy
    steel that is through hardening and noted in particular for use as
    bearings.

    52100 bearing steel is one kind of special steel with features of
    high wear resistance and rolling fatigue strength. High-carbon chromium
    bearing steel, engineering steel and some types of stainless steel and
    heat resistant steel are used as materials of bearings and for other
    purposes.

    Advantages of Chrome Bearing Steel 52100:

    • Superior hardness, 60-67 on Rockwell hardness scale (Rc) at room temperature

    • High carbon chrome alloy steel

    • Operates continually at temperatures up to 120°C

    • Used to produce precision ball bearings and roller bearings

    • Cost-effective

    • Long working life

    1. Relevant Steel Specification of ASTM 52100 Bearing Steel

    Country USA German Japan British
    Standard ASTM A295 DIN 17230 JIS G4805 BS 970
    Grades 52100 100Cr6/1.3505 SUJ2 535A99/EN31

    2. Chemical Composition of 52100 Bearing Steel and Equivalents

    Standard Grade C Mn P S Si Ni Cr Cu Mo
    ASTM A295 52100 0.93-1.05 0.25-0.45 0.025 0.015 0.15-0.35 0.25 1.35-1.60 0.30 0.10
    DIN 17230 100Cr6/1.3505 0.90-1.05 0.25-0.45 0.030 0.025 0.15-0.35 0.30 1.35-1.65 0.30
    JIS G4805 SUJ2 0.95-1.10 0.50 0.025 0.025 0.15-0.35 1.30-1.60
    BS 970 535A99/EN31 0.95-1.10 0.40-0.70 0.10-0.35 1.20-1.60

    3. Mechanical Properties of ASTM A295 52100 Bearing Steel

    Properties Metric Imperial
    Bulk modulus (typical for steel) 140 GPa 20300 ksi
    Shear modulus (typical for steel) 80 GPa 11600 ksi
    Elastic modulus 190-210 GPa 27557-30458 ksi
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Hardness, Brinell
    Hardness, Knoop (converted from Rockwell C hardness) 875 875
    Hardness, Rockwell C (quenched in oil from 150°C tempered) 62 62
    Hardness, Rockwell C (quenched in water from 150°C tempered) 64 64
    Hardness, Rockwell C (quenched in oil) 64 64
    Hardness, Rockwell C (quenched in water) 66 66
    Hardness, Vickers (converted from Rockwell C hardness) 848 848
    Machinability (spheroidized annealed and cold drawn. Based on 100 machinability for AISI 1212 steel) 40 40
    • 52100 Steel Physical Properties

    Properties Metric Imperial
    Density 7.81 g/cm3 0.282 lb/in³
    Melting point 1424°C 2595°F
    • 52100 Alloy Steel Thermal Properties

    Properties Metric Imperial
    Thermal expansion co-efficient (@ 23-280°C/73.4- 36°F, annealed) 11.9 µm/m°C 6.61 µin/in°F
    Thermal conductivity (typical steel) 46.6 W/mK 323 BTU in/hr.ft².°F

    4. Forging of A295 52100 Bearing Steel

    AISI
    52100 alloy steel is forged at 927 to 1205°C, and should not be forged
    below 925ºC. A post-forge equalization treatment is recommended at 745ºC
    for 4-6 hours followed by air cooling for SAE/AISI 52100 steel.

    6. Heat Treatment for ASTM 52100 Bearing Steel

    ASTM/AISI
    52100 alloy bearing steel is heated at 816°C followed by quenching in
    oil. Before performing this process, it is subjected to normalizing heat
    treatment at 872°C followed by slowly cooling in order to reduce the
    machining stress.

    Hot Working

    AISI 52100 bearing steels alloy can be hot worked at 205 to 538°C.

    Cold Working

    AISI 52100 bearing steel can be cold worked using conventional techniques in the annealed or normalized conditions.

    Annealing

    For spheroidize anneale, the following isothermal anneal is recommended:

    • 1500ºF (815ºC) for 3 hours

    • 1350ºF (735ºC) for 4 hours

    • 1250ºF (675ºC) for 3 hours

    • Slow cool to 1000ºF (540ºC) then air cool.

    Quenching

    AISI 52100 alloy bearing steel could be hardened by quenching in water from 801-829 degree or quench in oil from 816-842 degree.

    Tempering

    Temper to desired hardness as indicated by tempering curves after water or oil quench.

    5. Applications of 52100 Bearing Steel

    Alloy
    steel 52100 grade bearing steel is mainly used for the manufacture of
    aircraft bearings and other highly stressed parts. This steel grade
    52100 steel is preferably vacuum arc re-melted to give optimum
    performance.

    Typical applications: Bearing Manufacture, CV joints, ball screws, gauges, knife etc.

  • Previous:
  • Next:




  • Plasma cutting structural steel: http://robot.fanucamerica.com/Products/Robots/material-removal-robots.aspx

    FANUC America Authorized System Integrator Inovatech Engineering is helping to revolutionize the steel fabrication industry by providing fabricators with automated solutions that include industrial robots from FANUC to plasma cut structural steel beams and heavy plates. The system seen here is Inovatech’s SteelPRO or SP900 – A complete robotic beam line and plate cutting system. Inovatech’s SP900 comes standard with four-side cutting, 65 feet of infeed and outfeed conveyor, two 6’ x 10’ robotic plate tables, installation and training. The SP900 also comes standard with all the software required to run the system, including ProNest® nesting software from Hypertherm.

    The SP900 performs the work of seven single-purpose fabrication machines, and eliminates the need to transport profiles to other work cells. Four-side cutting, coping, plasma drilling, marking, beam splitting and sawing with continuous operation and high production volume are all possible with the SP900. Inovatech’s SteelPRO software automatically creates the cut program while the nine-axis robotic gantry performs the four-side beam processing.

    The SP900 is a complete robotic beam line machine with built-in touch sensing and collision protection. A single FANUC robot can process all four sides of a beam at once, making this robotic plasma cutting system fast and cost efficient. The SP900 combines a high performance six-axis FANUC robot with a robotic gantry and precision-made Güdel® linear track system to create a total of nine axes. In addition to providing versatility, using this type of precise, reliable equipment results in aerospace quality repeatability, as the SP900 can plasma cut structural steel and ‘drill’ bolt holes to 0.02mm.

    Finally the SP900 robotic plate table system cuts and processes flat plate, base plates and stiffener plates with six-axis beveling capability. The standard SP900 system comes equipped with two 6’ by 10’ plate tables that allow for continuous production – while one table is in production the other table can be loaded and unloaded. These plate tables can be upgraded to two 10’ by 24’ robotic plate tables. Hypertherm’s plasma cutting units power all cutting in Inovatech’s systems. The SP900 comes standard with high definition plasma and industry leading True Hole® technology from Hyperthem that is able to cut, saw, plasma drill, slot, mark and cope structural profiles up to 3.2″ (80mm) thick. Hypertherm plasma units on Inovatech SteelPRO machines produce outstanding quality bolt holes in just seconds.

    Inovatech’s team of dedicated engineers take the time to understand their customer’s needs and requirements to develop productive and profitable solutions. Put the Inovatech team and their world-class integrated robotic fabrication solutions to work for you. To learn more please visit http://www.inovatechengineering.com.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star