29 Years Factory Metal Forms Factory in Detroit

29 Years Factory
 Metal Forms Factory in Detroit

Short Description:

Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker)             Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg             Discs, pu...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
    29 Years Factory Metal Forms Factory in Detroit, sincerely look forward to serving you in the near future. You are sincerely welcome to visit our company to talk business face to face with each other and establish long-term co-operation with us!


    Steel products can also be divided by their shapes. We can produce in the following shapes:

    Forged bars

    Length up to 16,000 mm
    Round from 80 to 1,200 mm Ø
    Square from 140 mm to 460 mm
    Flat from 30 x 25 mm to 2.000 x 600 mm
    (in case of a smaller width correspondingly thicker)

    [Translate to English:] Geschmiedete Stäbe
               

    Shafts

    Barrel/flange diameter up to 1.600 mm Ø
    Length up to 15.000 mm
    Weight from 10 kg to 35.000 kg

    [Translate to English:] Wellen
               

    Discs, punched discs, hubs

    Diameter up to 1.200 mm
    (smaller dias correspondingly thicker)
    Thickness up to 600 mm

     

     

    [Translate to English:] Scheiben, Lochscheiben, Nabenscheiben
               

    Blocks, plates (forged three-dimensionally)

    Length max. 6.000 mm
    Width max. 1.800 mm
    Thickness max. 1.000 mm
    (in case of smaller thickness greater length and width)
    Weight max. 30.000 kg

     

     

    [Translate to English:] Blöcke, Platten
               

    Forged tubes, cylinders and other hollow forgings

    Inner diameter 160 mm to 600 mm
    Length up to 1,200 mm
    Weight up to 10.000 kg

     

     

    [Translate to English:] Geschmiedete Hohlstäbe, Zylinder
               

    Forged rings

    Outer diameter up to 2.400 mm
    Height up to 2.200 mm
    Weight up to 25.000 kg

    [Translate to English:] Geschmiedete Ringe
               

    Seamless rolled rings

    Outer diameter up to 3.500 mm
    Height up to 800 mm
    Weight 10 kg to 8.000 kg

    [Translate to English:] Nahtlos gewalzte Ringe
              

    We can also produce according to clients' designs. If you have your own design, just feel free to contact us.

  • Previous:
  • Next:



  • web page:http://www.steelsino.com
    Shanghai Bozhong Metallic Group was started in 2006, with 31 million registered fund, It is the foremost integrated operator of contemporary services market for specialty stainless metal.It is the main construction corporation of the Shanghai metal contemporary services in depth pilot area, which was established up by nation’s commerce ministry and Shanghai govt.



    A buddy needed a quick frame patch on his 57 chevy, so figured it was a good time to show how you guys can fix frames. If you dont care too terribly much about how it looks this is a great method. Otherwise you can spend more time making it look nice with grinding down all the welds, etc. Did this in 10 hours. This is going to be a rat rod, so I like showing the hard lines of what I have done. I have also repaired frames with a formed channel being placed inside or outside the original frame- but that is more costly.

    For more how to videos make sure to check out & subscribe to my channel!!

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House