28 Years Factory AISI304| SUS304| EN1.4948 Wholesale to Romania

28 Years Factory
 AISI304| SUS304| EN1.4948 Wholesale to Romania

Short Description:

Chemical Composition of Stainless Steel 304 Table 1. Chemical composition for 304 stainless steel alloys % 304 304L 304H C 0.0 – 0.07 0.0 – 0.03 0.04 – 0.08 Mn 0.0 – 2.0 0.0 – 2.00 0.0 – 2.0 Si 0.0 – 1.00 0.0 – 1.00 0.0 – 1.0 P 0.0 – 0.05 0.0 – 0.05 0.0 – 0.04 S 0.0 – 0.03 0.0 – 0.02 0.0 – 0.02 Cr 17.50 – 19.50 17.50 – 19.50 ...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for 28 Years Factory AISI304| SUS304| EN1.4948 Wholesale to Romania, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.


    Chemical Composition of Stainless Steel 304

    Table 1. Chemical composition for 304 stainless steel alloys

    %

    304

    304L

    304H

    C

    0.0 – 0.07

    0.0 – 0.03

    0.04 – 0.08

    Mn

    0.0 – 2.0

    0.0 – 2.00

    0.0 – 2.0

    Si

    0.0 – 1.00

    0.0 – 1.00

    0.0 – 1.0

    P

    0.0 – 0.05

    0.0 – 0.05

    0.0 – 0.04

    S

    0.0 – 0.03

    0.0 – 0.02

    0.0 – 0.02

    Cr

    17.50 – 19.50

    17.50 – 19.50

    17.00 – 19.00

    Ni

    8.00 – 10.50

    8.00 – 10.50

    8.00 – 11.00

    Fe

    Balance

    Balance

    Balance

    N

    0.0-0.11

    0.0-0.11

    0.0 – 0.10

    Properties of Stainless Steel 304

    Mechanical Properties of Stainless Steel 304

    Table 2a. Mechanical properties for 304 stainless steel alloys – sheet up to 8 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    540 – 750

    520 – 700

    -

    Proof Stress (MPa)

    230 Min

    220 Min

    -

    Elongation A50 mm

    45 Min %

    45 Min %

    -


    Table 2b. Mechanical properties for 304 stainless steel alloys – plate from 8 – 75 mm thick

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    520 – 720

    500 – 700

    -

    Proof Stress (MPa)

    210 Min

    200 Min

    -

    Elongation A5

    45 Min %

    45 Min %

    -


    Table 2c. Mechanical properties for 304 stainless steel alloys – bar and section up to 160 mm diameter / thickness

    Grade

    304

    304L

    304H

    Tensile Strength (MPa)

    500 – 700

    500 – 700

    500 – 700

    Proof Stress (MPa)

    190

    175 Min

    185 Min

    Elongation A50 mm

    45 Min %

    45 Min %

    40 Min %

    Hardness Brinell

    215 Max HB

    215 Max HB

    -

    Physical Properties of Stainless Steel 304

    Table 3. Physical properties for 304 stainless steel alloys

    Property

    Value

    Density

    8.00 g/cm3

    Melting Point

    1450 °C

    Modulus of Elasticity

    193 GPa

    Electrical Resistivity

    0.072 x 10-6 Ω.m

    Thermal Conductivity

    16.2 W/m.K

    Thermal Expansion

    17.2 x 10-6 /K

    Alloy Designations

    Stainless steel 304 also corresponds to the following standard designations and specifications:

    Euronorm

    UNS

    BS

    En

    Grade

    1.4301

    S30400

    304S15

    304S16

    304S31

    58E

    304

    1.4306

    S30403

    304S11

    -

    304L

    1.4307

    -

    304S11

    -

    304L

    1.4311

    -

    304S11

    -

    304L

    1.4948

    S30409

    304S51

    -

    304H

    Corrosion Resistance of Stainless Steel 304

    Stainless steel 304
    has excellent corrosion resistance in a wide variety of environments
    and when in contact with different corrosive media. Pitting and crevice
    corrosion can occur in environments containing chlorides. Stress
    corrosion cracking can occur at temperatures over 60°C.

    Heat Resistance of Stainless Steel 304

    Stainless steel 304 has
    good resistance to oxidation in intermittent service up to 870°C and in
    continuous service to 925°C. However, continuous use at 425-860°C is
    not recommended if corrosion resistance in water is required. In this
    instance 304L is recommended due to its resistance to carbide
    precipitation.

    Where high strength is required at temperatures above 500°C and up to
    800°C, grade 304H is recommended. This material will retain aqueous
    corrosion resistance.

    Fabrication of Stainless Steel 304

    Fabrication of all stainless steels should
    be done only with tools dedicated to stainless steel materials. Tooling
    and work surfaces must be thoroughly cleaned before use. These
    precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.

    Cold Working of Stainless Steel 304

    Stainless steel 304 readily
    work hardens. Fabrication methods involving cold working may require an
    intermediate annealing stage to alleviate work hardening and avoid
    tearing or cracking. At the completion of fabrication a full annealing
    operation should be employed to reduce internal stresses and optimise
    corrosion resistance.

    Hot Working of Stainless Steel 304

    Fabrication methods, like forging, that involve hot working should
    occur after uniform heating to 1149-1260°C. The fabricated components
    should then be rapidly cooled to ensure maximum corrosion resistance.

    Heat Treatment of Stainless Steel 304

    Stainless steel 304 cannot be hardened by heat treatment.

    Solution treatment or annealing can be done by rapid cooling after heating to 1010-1120°C.

    Machinability

    Stainless steel 304 has good machinability. Machining can be enhanced by using the following rules:

    • Cutting edges must be kept sharp. Dull edges cause excess work hardening.

    • Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.

    • Chip breakers should be employed to assist in ensuring swarf remains clear of the work

    • Low thermal conductivity of austenitic alloys results in heat
      concentrating at the cutting edges. This means coolants and lubricants
      are necessary and must be used in large quantities.

    Welding of Stainless Steel 304

    Fusion welding performance for Stainless steel 304 is excellent both with and without fillers. Recommended filler rods and electrodes for stainless steel 304 is grade 308 stainless steel.
    For 304L the recommended filler is 308L. Heavy welded sections may
    require post-weld annealing. This step is not required for 304L. Grade
    321 may be used if post-weld heat treatment is not possible.

    Applications of Stainless Steel 304

    Stainless steel 304 is typically used in:

    • Sinks and splashbacks

    • Saucepans

    • Cutlery and flatware

    • Architectural panelling

    • Sanitaryware and troughs

    • Tubing

    • Brewery, dairy, food and pharmaceutical production equipment

    • Springs, nuts, bolts and screws

  • Previous:
  • Next:



  • Global And China Conductive Coating Industry 2014 Market Research Report

    Browse Complete report with TOC : http://www.marketsnresearch.com/report/184576.php

    The report firstly introduced Conductive Coating basic information included Conductive Coating definition classification application industry chain structure industry overview; international market analysis, China domestic market analysis, Macroeconomic environment and economic situation analysis, Conductive Coating industry policy and plan, Conductive Coating product specification, manufacturing process, cost structure etc.

    Browse Complete report with TOC : http://www.marketsnresearch.com/report/184576.php

    Then statistics Global and China key manufacturers Conductive Coating capacity production cost price profit production value gross margin etc information, and Global and China Conductive Coating capacity production market share supply demand shortage import export consumption etc data statistics, and Conductive Coating 2009-2014 capacity production price cost profit production value gross margin etc information.

    Buy Copy of Report @ http://www.marketsnresearch.com/report/184576.php

    And also listed Conductive Coating upstream raw materials and down stream analysis and Conductive Coating marketing channels industry development trend and proposals. In the end, The report introduced Conductive Coating new project SWOT analysis Investment feasibility analysis investment return analysis and also give related research conclusions and development trend analysis on China Conductive Coating industry. In a word, it was a depth research report on China Conductive Coating industry. And thanks to the support and assistance from Conductive Coating industry chain related technical experts and marketing engineers during Research Team survey and interviews.

    Table of Contents

    Chapter One Conductive Coating Industry Overview
    1.1 Conductive Coating Definition
    1.2 Conductive Coating Classification and Application
    1.3 Conductive Coating Industry Chain Structure
    1.4 Conductive Coating Industry Overview

    Chapter Two Conductive Coating International and China Market Analysis
    2.1 Conductive Coating Industry International Market Analysis
    2.1.1 Conductive Coating International Market Development History
    2.1.2 Conductive Coating Product and Technology Developments
    2.1.3 Conductive Coating Competitive Landscape Analysis
    2.1.4 Conductive Coating International Key Countries Development Status
    2.1.5 Conductive Coating International Market Development Trend
    2.2 Conductive Coating Industry China Market Analysis
    2.2.1 Conductive Coating China Market Development History
    2.2.2 Conductive Coating Product and Technology Developments
    2.2.3 Conductive Coating Competitive Landscape Analysis
    2.2.4 Conductive Coating China Key Regions Development Status
    2.2.5 Conductive Coating China Market Development Trend
    2.3 Conductive Coating International and China Market Comparison Analysis

    Chapter Three Conductive Coating Development Environmental Analysis
    3.1 China Macroeconomic Environment Analysis
    3.1.1 China GDP Analysis
    3.1.2 China CPI Analysis
    3.2 European Economic Environmental Analysis
    3.3 United States Economic Environmental Analysis
    3.4 Japan Economic Environmental Analysis
    3.5 Global Economic Environmental Analysis

    Chapter Four Conductive Coating Development Policy and Plan
    4.1 Conductive Coating Industry Policy Analysis
    4.2 Conductive Coating Industry News Analysis
    4.3 Conductive Coating Industry Development Trend

    Chapter Five Conductive Coating Manufacturing Process and Cost Structure
    5.1 Conductive Coating Product Specifications
    5.2 Conductive Coating Manufacturing Process Analysis
    5.3 Conductive Coating Cost Structure Analysis
    5.4 Conductive Coating Cost Trend



    steel rolling mills manufacturing video steel round bars steel square bars steel flats in khanna rolling mills in punjab india www.bssteelindia.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car