26 Years Factory EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Montpellier

26 Years Factory
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Montpellier

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
    26 Years Factory EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory from Montpellier, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • My review here: https://www.google.com/url?q=https://goo.gl/AqFTnH&sa=D&ust=1453472790479000&usg=AFQjCNEe8EQpztW3VhsOMQXEHTTA-Ku02A SUJ2 steel gear 45 p20 round light 718h gcr15 mold rod 42CR 40CR



    A company whose principal activities consist of exploration for mineral, oil or gas may not progress to the next stage of development or to a stage where it is able to generate revenue. Other industry specific risks must also be considered.

    Zinc Markets, Exploration and Production (24 August 2015)
    Zinc ‘s many uses and potential supply deficit mean this mineral has high potential. What do investors need to know? The seminar will cover the risks and opportunities in zinc markets, exploration & production, including:
    Zinc and its uses
    Supply, demand and pricing
    Types and natural occurrence
    Exploration, Mining & Processing
    Opportunities and risks

    AMC Consultants is a leading independent mining consultancy, providing services exclusively to the minerals sector. AMC works with clients to plan new mines or improve the operations of existing mines, with a primary focus on achieving optimum output and return.

    Speaker
    MARK BERRY
    Principal Geologist, AMC Consultants
    Mark’s primary technical expertise is in mining geology, resource and reserve estimation, exploration and mining due diligence, geological risk management, expert reports, valuation, and training. His broad experience within the mining industry includes exploration, operations, project and financial management, stock/security exchange listing and compliance, research and development, and education. Mark’s experience encompasses base and precious metals, nickel, iron ore, coal, and industrial minerals.
    With over thirty five years’ of geology experience, focused on delivering innovative and high quality results within time and budget constraints, Mark is based in AMC’s Singapore office.

    Guest Panellist
    AZMAN JAAFAR
    Partner, RHTLawTaylorWessing
    Azman Jaafar is one of the founding members of RHTLaw Taylor Wessing and is the Head of the Firm’s Corporate Practice. His corporate practice focuses mainly on energy and resources, and hospitality industries. He has advised and represented clients in numerous transactions involving mergers and acquisitions, corporate finance, mining and oil and gas in Singapore, Indonesia, and the People’s Republic of China. Fluent in Mandarin and Bahasa Indonesia, he also heads the firm’s Indonesia Practice and manages the ASEAN Plus Group.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car