2016 Super Lowest Price Metal Forms Factory in Rome
Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Ø Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker) Shafts Barrel/flange diameter up to 1.600 mm Ø Length up to 15.000 mm Weight from 10 kg to 35.000 kg Discs, pu...
We have a highly efficient team to deal with inquiries from customers. Our goal is "100% customer satisfaction by our product quality, price & our team service" and enjoy a good reputation among clients. With many factories, we can provide a wide range of 2016 Super Lowest Price Metal Forms Factory in Rome, Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation!
Steel products can also be divided by their shapes. We can produce in the following shapes:
|Length||up to 16,000 mm|
|Round||from 80 to 1,200 mm Ø|
|Square||from 140 mm to 460 mm|
|Flat||from 30 x 25 mm to 2.000 x 600 mm
(in case of a smaller width correspondingly thicker)
|Barrel/flange diameter||up to 1.600 mm Ø|
|Length||up to 15.000 mm|
|Weight||from 10 kg to 35.000 kg|
Discs, punched discs, hubs
|Diameter||up to 1.200 mm
(smaller dias correspondingly thicker)
|Thickness||up to 600 mm|
Blocks, plates (forged three-dimensionally)
|Length||max. 6.000 mm|
|Width||max. 1.800 mm|
|Thickness||max. 1.000 mm
(in case of smaller thickness greater length and width)
|Weight||max. 30.000 kg|
Forged tubes, cylinders and other hollow forgings
|Inner diameter||160 mm to 600 mm|
|Length||up to 1,200 mm|
|Weight||up to 10.000 kg|
|Outer diameter||up to 2.400 mm|
|Height||up to 2.200 mm|
|Weight||up to 25.000 kg|
Seamless rolled rings
|Outer diameter||up to 3.500 mm|
|Height||up to 800 mm|
|Weight||10 kg to 8.000 kg|
We can also produce according to clients' designs. If you have your own design, just feel free to contact us.
Full information: https://goo.gl/vMLemQ.
Punch and dies provide strong resistance against wear, especially when working with stainless steel. Round punch and die sets are fully machined from the highest quality tool steel (ISO) with 8 cutting sides and are hardened to 55 rockwell. Square punch and die sets are manufactured from the highest quality tool steel (ISO) by EDM machine centre and are also hardened to 55 rockwell.
The HP-3 hydraulic hole puncher is a portable unit weighing only 4.5kg with an output performance at 10 ton capacity. This unit requires little effort to operate and allows a professional finish on the job with no damage to finished paint products. The HP-3 also offers a 2 speed pump for faster punching and can punch up to 2.4mm stainless steel.
This hydraulic punching unit is best used in the sheet metal industry, electrical switchboards, sink wastes, kitchen fabricators etc.
For further information please visit us at http://www.stainelec.com.au