2016 New Style BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory in Egypt

2016 New Style
 BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory in Egypt

Short Description:

BS EN 42crmo4 Alloy Steel is a common chromium-molybdenum steel that usually used after quenchedand tempered, with high intensity, high hardenability. BS EN 42CrMo4round steel has better performance than 34CrMo4 steel due to the carbonand chromium content is higher. 42CrMo4 alloy steel has higher strength and hardenability. The 42CrMo4 alloy material alsohas high fatigue strength and good low-temperature impact toughness. The temper brittleness is not obvious. Although 42CrMo4 steel is mo...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of 2016 New Style BS EN 42CrMo4 | 1.7225 Alloy Engineering Steel Factory in Egypt, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.


    BS EN 42crmo4 Alloy Steel

    is a common chromium-molybdenum steel that usually used after quenched
    and tempered, with high intensity, high hardenability. BS EN 42CrMo4
    round steel has better performance than 34CrMo4 steel due to the carbon
    and chromium content is higher. 42CrMo4 alloy steel

    has higher strength and hardenability. The 42CrMo4 alloy material also
    has high fatigue strength and good low-temperature impact toughness. The

    temper brittleness is not obvious.

    Although 42CrMo4 steel is more expensive than 41Cr4 steel, it is more

    preferable in terms of material properties. EN 42CrMo4 alloy
    engineering steel materials have been widely used in automotive driving
    elements. Otai Steel is able to supply you prime quality of 42CrMo4
    alloy steel materials with wide range.

    1.42CrMo4 Alloy Steel Supply Range

    42CrMo4 Round bar Sizes: 80mm – 1200mm
    Steel 42CrMo4 Flat and Plate: 10mm-1500mm thickness x 200-3000mm width
    Other steel shape and sizes available according to your requirements.

    Surface condition: Black, rough machined, peeled, turned or other requirements according to your requirements.

    2.BS EN 42CrMo4 Alloy Steel Relevant Specifications and Equivalents

    BS EN 10250 Material No. DIN ASTM A29 JIS G4105 BS 970-3-1991 BS 970-1955 AS 1444 AFNOR
    42CrMo4 1.7225 38HM 4140 SCM440 708M40 EN19A 4140 42CD4

    3.42CrMo4 Alloy Steel Chemical Composition

    42CrMo4/1.7225 C Mn Si P S Cr Mo
    0.38-0.45 0.60-0.90 0.40 max 0.035 max 0.035 max 0.90-1.20 0.15-0.30

    4. DIN 42CrMo4 Alloy Steel Mechanical Properties

    Size Ø mm Yield stress
    Rp0.2,N/nn2, min.
    Ultimate tensile Stress,
    Rm,N/nn2
    Elongation
    A5,%, min.
    Hardness HB Toughness
    KV, Joule, min.
    <40 750 1000-1200 11 295-355 35 at 20ºC
    40-95 650 900-1100 12 265-325 35 at 20ºC
    >95 550 800-950 13 235-295 35 at 20ºC

    5. Heat Treatment of 42CrMo4 Steels

    Annealing of 42CrMo4 Steels

    • Heat steel 42CrMo4 forged steel slowly and thoroughly to 800-850°C;

    • Cool slowly in the furnace to the temperature 480°;

    • Complete annealing the steel in the air.

    Quenched and Tempered (Q+T)

    • Heat 42CrMo4 steel slowly to 880°C;

    • Soak at this temperature then quench in oil;

    • Temper as soon as 42CrMo4 steel reach room temperature (20°C);

    • Heat uniformly to the suitable temperature of 560°C;

    • Withdraw the 42CrMo4 material from the furnace and cool in the air.

    6. Forging of 42CrMo4 Alloy Steel

    • Preheat 42CrMo4 engineering steel uniformly and slowly;

    • Increase the forging temperature up to 1150-1200°C.

    • Always keep the forging temperature above at least 850°C

    7.Weldability

    Engineering

    steel 42CrMo4 has only limited weldability. Preheating to 200-300°C is
    strongly recommended; the upper limit should not be exceeded because of
    risk for deterioration of the chrome layer.

    Alloy steel 42CrMo4
    can be friction welded. However, precautions are necessary so as to
    limit the formation of undesirable microstructures in the welded zone.

    8.Application of 42CrMo4 Alloy Steels

    EN

    42CrMo4 alloy steel is widely used for engineering steel purpose, such
    as: making various kinds of machinery, automobile, mining spare part,
    the gearwheel of the engine, the driving gear of supercharger, the
    connecting rob, the pinchock under the high pressure, parts for power
    train applications, cold formed fastener components, shafts, gears,
    drill collars for the oil exploration, etc.

  • Previous:
  • Next:



  • Shower Grates Maitland – The future of Plumbing and Stainless Grates!
    Our Website: http://www.paigestainless.com.au/click-drain/
    Twitter: https://twitter.com/PaigeStainless
    Google Business Page: https://plus.google.com/+PaigestainlessAustralia
    Facebook: https://www.facebook.com/PaigeStainless/

    See our product at 0:59

    CLICK DRAIN™ developed using PAIGE STAINLESS HEELGUARD® has developed a full stainless steel drainage system using this centuries technology for ease of onsite fitting.

    This patented product enables both builders and plumbers to basically style the drain on site as required, its clever and unique `click` together system has out let sections, joiner sections, change of direction sections and stop ends to create a drain for all site requirements.”

    No one else has actually manufactured Heelguard to the Architectural Market for over Twenty Years to the Australian Design Requirement.

    OPENING HOURS:

    Monday-Friday: 9:00am – 5:00pm

    YOU COULD REACH US THROUGH:

    27 Cessna Drive, Caboolture QLD 4510, Australia
    Email: sales@paigestainless.com.au
    Tel: + 61 7 5499 1511
    Fax: +617 5499 0741

    OTHER PRODUCTS:

    Bathroom Grates
    Shower Grates
    Tile Inserts
    Civil Drainage
    Linear Surface Water Drainage
    Architectural Grates
    Platforms and Decks
    Floor Grates
    Entry Mats
    Tree Grates
    Water Features
    Click Drain
    Lights

    FULL CUSTOM SYSTEMS ARE OUR SPECIALTY.



    Description http://www.advancedglobalmaterials.com, or Call us at 631-286-8570 for a quote. We supply all AMS Specs, Alloy Steel,Stainless Steel,Aluminum, Titanium and Nickel

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree