2016 Good Quality Metal Forms in Senegal

2016 Good Quality Metal Forms in Senegal

Short Description:

Steel products can also be divided by their shapes. We can produce in the following shapes: Forged bars Length up to 16,000 mm Round from 80 to 1,200 mm Square from 140 mm to 460 mm Flat from 30 x 25 mm to 2.000 x 600 mm(in case of a smaller width correspondingly thicker) Shafts Barrel/flange diameter up to 1.600 mm Length up to 15.000 mm Weight from 10 kg to 35.000 kg Discs, punched discs, hubs Diameter up to 1.200 mm(smaller dias correspondingly thicker) Thickn...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Our team through professional training. Skilled professional knowledge, strong sense of service, to meet the service needs of customers for 2016 Good Quality Metal Forms in Senegal, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.


    Steel products can also be divided by their shapes. We can produce in the following shapes:




    Forged bars

    Length up to 16,000 mm
    Round from 80 to 1,200 mm
    Square from 140 mm to 460 mm
    Flat from 30 x 25 mm to 2.000 x 600 mm
    (in case of a smaller width correspondingly thicker)


    Shafts

    Barrel/flange diameter up to 1.600 mm
    Length up to 15.000 mm
    Weight from 10 kg to 35.000 kg


    Discs, punched discs, hubs

    Diameter up to 1.200 mm
    (smaller dias correspondingly thicker)
    Thickness up to 600 mm


    Blocks, plates (forged three-dimensionally)

    Length max. 6.000 mm
    Width max. 1.800 mm
    Thickness max. 1.000 mm
    (in case of smaller thickness greater length and width)
    Weight max. 30.000 kg


    Forged tubes, cylinders and other hollow forgings

    Inner diameter 160 mm to 600 mm
    Length up to 1,200 mm
    Weight up to 10.000 kg


    Forged rings

    Outer diameter up to 2.400 mm
    Height up to 2.200 mm
    Weight up to 25.000 kg


    Seamless rolled rings

    Outer diameter up to 3.500 mm
    Height up to 800 mm
    Weight 10 kg to 8.000 kg




    We can also produce according to clients' designs. If you have your own design, just feel free to contact us.


  • Previous:
  • Next:



  • Forcing a Patina (Carbon Steel Knife Maintenance)



    Mild steel is the common term for low carbon steel. Gas metal arc welding of mild steel is the most common form of welding.
    In order to achieve a good weld:
    -Make sure your work return lead has a clean surface and is secured firmly
    -Make sure all plates are clean from rust, oil and grease
    -Make sure there are no kinks in your hose for smooth wire transition
    Parameter settings will vary depending on your application. Today, we’re welding 5mm thick carbon steel plate with an Alpha Q330 MIG machine, 1.2mm wire and ARGOSHIELD Light shielding gas which is an argon, oxygen and carbon dioxide mixture.
    - Use a forehand welding technique at a 10 to 15 degree travel angle
    - Keep electrode extension as short as possible and torch to work distance constant
    - Ensure that your components are cleaned post weld before being put into service.
    Remember that there is no universal set up when it comes to welding mild steel. Each machine may need to be specifically tuned by the operator based on the application and material being welded, the shielding gas mixture and wire being used, and any other unique requirements. Variations of heat input can be controlled by the voltage settings of the machine.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car