20 Years manufacturer EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Manufacturer in Mali

20 Years manufacturer
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Manufacturer in Mali

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for 20 Years manufacturer EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Manufacturer in Mali, welcomes all overseas friends and merchants to establish collaboration with us. We will provide you with honest, high quality and efficient service to meet your requirements.


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • **FOR SALE** $25k THR Mustang Performance 550 HP Solid Roller 347 Stroker All Motor For Sale $25k 10 sec all motor Mustang Coupe THR Texas Hot Rods Call for more details (915) 449-6224 Brian THR Custom Solid Roller 347 Stroker Probe Dome 12.5:1 Pistons Probe 4340 Forged Ultralight I-Beam Rods Probe 4340 Forged Steel Stroker Crankshaft Edelbrock Victor Jr Single Plane Intake ProSystems Custom Carb 780 CFM Milodon Billet Main Cap Conversion Milodon Billet Main Support Girdle All ARP Bolts / ARP Head Studs Balanced & BluePrinted Jay Allen Camshaft Innovations Custom Solid Roller Billet Cam AFR Heads Solid Roller Springs to .750 lift .731/.705 Solid Roller Camshaft Link Bar Solid Roller Lifters (Comp Cams) FacePlated Tremec Trans / Ram Stage III Clutch Kit Aeromotive Braided Line Fuel System Aerospace Components Billet Drag Brakes Aerospace Components Billet Evac Pump MSD Ignition, MSD Billet Distributor, MSD Coil Taylor 10 mm 409 Race Wires CSR Elec Water Pump Weld Racing Pro Magnum Wheels/MT ET STREET Tires Moser Spool & Axles 4.56 Gears / Moser Billet Girdle THR Custom Basket Style Cage & Subframes 475 RWHP / 435 RWTQ on Mustang Dyno ALL MOTOR PASS



    Since its establishment in 2005, we have been developing safe and environment friendly steel grating. Through endless efforts for R&D, we have developed the MAGIC GRATING with a triangular structure which is capable to recover all those defectives of lattice steel grating.

    Our mission is to become the safety standard for grating. Currently we have lots of technical authentifications such as NEP (new excellent product), ISO9001, 14001 and Kotra seal of excellence in recognition of its quality, commercial merits & superiorities. We also have developed the Non-Slip Magic Grating for the plant industry.

    We sucessfully supplied them to nuclear power plants, thermoelectric power plants and shipbuilding & offshore plants.

    Bethel Engineering will become the world’s best plant company through development of safer Magic Grating products. Thank you.

    Visit our e-catalog and find out more!

    http://www.tradekorea.com/e-catalogue/mk8811

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup