16 Years manufacturer M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory for Egypt

16 Years manufacturer
 M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory for Egypt

Short Description:

AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2 is a medium alloyed high speed steel which has good machinability. The H-SS M2 chemical composition gives a good combination of well-balanced toughness, wear resistance and red hardness properties. Widely used for cutting tools such as twist drills, taps, milling cutters, saws, knives etc. Also commonly used in cold work punches and dies and cutting applications involving high speed...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for 16 Years manufacturer M2 Tool Steel | 1.3343 | HS-6-5-2C| SKH51 Factory for Egypt, Please send us your specifications and requirements, or feel free to contact us with any questions or inquiries that you may have.


    AISI M2 Tool Steel is molybdenum based high-speed steel in tungsten–molybdenum series. HSS grade steel M2
    is a medium alloyed high speed steel which has good machinability. The
    H-SS M2 chemical composition gives a good combination of well-balanced
    toughness, wear resistance and red hardness properties. Widely used for
    cutting tools such as twist drills, taps, milling cutters, saws, knives
    etc. Also commonly used in cold work punches and dies and cutting
    applications involving high speed and light cuts.

    Grade M2 High Speed Steel is by far the most popular high speed steel replacing high speed steel grade T1 in most applications because of its superior properties and relative economy.

    1. Common M2 Tool Steel Related Specifications and Equivalents

    Country USA German Japan
    Standard ASTM A600 DIN EN ISO 4957 JIS G4403
    Grades M2 1.3343 SKH51

    2. ASTM M2 Tool Steel Chemical Composition Properties

    ASTM A600 C Mn P S Si Cr V Mo W
    M2 regular C 0.78 0.88 0.15 0.40 0.03 0.03 0.20 0.45 3.75 4.50 1.75 2.20 4.50 5.50 5.50 6.75
    DIN ISO 4957 C Mn P S Si Cr V Mo W
    1.3343 0.86 0.94 0.45 3.80 4.50 1.70 2.10 4.70 5.20 5.90 6.70
    JIS G4403 C Mn P S Si Cr V Mo W
    SKH51 0.80 0.88 0.40 0.03 0.03 0.45 3.80 4.50 1.70 2.10 4.70 5.20 5.90 6.70

    3. AISI HSS M2 Tool Steel Mechanical Properties

    • Physical Properties of HSS M2 Material

    Density         0.294 lb/in3 (8138 kg/m3)
    Specific Gravity                  8.15
    Modulus of Elasticity         0.294 lb/in3 (8138 kg/m3)
    Thermal conductivity         24 Btu/ft/hr/°F  41.5 W/m/°K
    Machinability          65% of a 1% carbon steel
    • AISI M2 Tool Steels Properties Mechanical

    Mechanical properties Metric Imperial
    Hardness, Rockwell C (tempered at 1150°F, quenched at 2200°F) 62 62
    Hardness, Rockwell C (as hardened, quenched at 2200°F) 65 65
    Compressive yield strength (when tempered at 300°F) 3250 MPa 471000 psi
    Izod impact unnotched (when tempered at 300°F) 67 J 49.4 ft-lb
    Abrasion (loss in mm3, as-hardened; ASTM G65) 25.8 25.8
    Abrasion (loss in mm3, tempered at 1275°F; ASTM G65) 77.7 77.7
    Poisson’s ratio 0.27-0.30 0.27-0.30
    Elastic modulus 190-210 GPa 27557-30458 ksi
    • M2 Steels Thermal Properties

    Thermal properties Metric Imperial
    CTE, linear (@20.0 – 100°C/ 68.0 – 212°F) 10 μm/m°C 5.56 μin/in°F
    CTE, linear (@20.0 – 500°C/68.0 – 932°F) 12.2 μm/m°C 6.78 μin/in°F
    CTE, linear (@20.0 – 850°C/68.0 – 1560°F) 12.6 μm/m°C 7 μin/in°F

    4. Forging of AISI M2 High Speed Steel

    Pre
    heat M2 HSS steel slowly and uniformly to 850-900°C. The heat should
    then be increased more quickly to the forging temperature of
    1050-1150°C. If during the forging
    the temperature of the M2 high speed tool steel material drops below
    880-900°C, re-heating will be necessary. Cool the M2 steel component
    very slowly after forging.

    5. Heat Treatment of M2 Steel HSS

    • Anneal

    Heat
    to 1600° F, soak thoroughly at heat. Furnace cool 25° F per hour to
    900° F, air cool to room temperature. Approximate annealed hardness 241
    Maximum Brinell.

    Stress Relief of Unhardened Material: Heat slowly
    to 1200 to 1250° F. Soak for two hours per inch of thickness at heat.
    Slow cool (furnace cool if possible) to room temperature.

    • Hardening

    Preheat: Heat slowly to 1550° F, soak thoroughly, heat to 1850° F, soak thoroughly.

    • Harden

    Soak
    time in the furnace varies from a few minutes to a 15 minutes,
    depending tool size, heat capacity of the furnace, and the size of the
    charge. – Heat to 2150 to 2200° F for max. toughness and minimum
    distortion. – Heat to 2250 to 2275° F for max. hardness and abrasion
    resistance.

    • Quench

    For full
    hardness, oil quench to 150-200° F. Air quench to 150° F. When quenching
    in hot salt maintain the quench just above the Ms temperature. After
    equalizing withdraw parts from the hot salt and air cooled to 150° F.

    • Temper

    Double
    temper is mandatory, three tempers are sometimes preferred. Soak for 2
    hours per inch of thickness. Air cool to room temperature between
    tempers. The best tempering range for hardness, strength and toughness
    is 1000 to 1050° F.

    Temper° F Rockwell “C” Temper° F Rockwell “C”
    As-quenched 64 900 64
    400 63 1000 65.5
    500 62.5 1050 63.5
    600 62.5 1100 61.5
    700 62.5 1150 60
    800 63.5 1200 53

    6. Machinability of AISI M2 Tool Steel H-SS

    Shaping
    of HSS M2 tool steels can be carried out using grinding methods.
    However, they have poor grinding capability and hence they are regarded
    as “medium” machinability tool steel under annealed conditions. The
    machinability of these tool steels M2 is only 50% of that of the easily
    machinable W group or water hardening tool steels.

    7. M2 Tool Steel Applications

    The main use of high-speed steels continues to be in the manufacture of various cutting tools.

    Typical
    applications for M2 high speed steel are twist drills, reamers,
    broaching tools, taps, milling tools, metal saws. M2 is suitable for
    cold forming tools such as extrusion rams and dies, also widely used in
    all kinds of cutting tools, knife and punches and die applications,
    plastic moulds with elevated wear resistance and screws.

  • Previous:
  • Next:



  • Titan Engineering is a Singapore based distributor of Titanium, High Temperature metal & Specialty alloys. Titan has an extensive stock of prime titanium metal plates, sheets, round bars and welding rods in CP grades and Ti6Al4V grades. Our supply range includes Nickel, Inconel®, Monel®, titanium heat ex-changer seamless & welded tubes and MMO coated anodes. Titan is an approved supplier to Rolls-Royce and other major OEMs. Let Titan be your partner in your titanium procurement.

    Titanium Round Bars & Rods (Best Seller -1 )

    Round Titanium Bars & Rods as per ASTM B348, ASME SB348, JIS TP340, AMS 4928 are available in CP Grades 1,2,3,4 & Grade-5 Ti6AL4V in round sizes from Dia 1mm to 500mm diameter. Our round bars are available in various finishes like, centerless ground, CNC turned or rough turned finishes. Bars are made to tolerances of h9 or h8. Cut lengths as per customers requirement as well as No Minimum order quantity is our specialty. Titan is an approved supplier to Rolls-Royce and other major OEMs. Long term supply arrangements are taken for stable and timely material supplies.

    Titanium Plates & Sheets (Best Seller -2 )

    Titanium Plate & Sheets, made as per ASTM B265, ASTM SB265 & AMS 4911 available in both CP and Alloy grades in thickness ranging from 0.5mm to 100 mm thick. Titanium Plate is available in widths and lengths based on customers requirements. Customers can buy only what they need and not full sheets or available sizes. We supply Titanium Sheets and Plates at very competitive prices as we source direct from good quality, top-tier mills. Titan Engineering offers custom processing which includes: Shearing, Saw Cutting, Water Jet Cutting, Milling, Wire-cutting for precise sizes & precision grinding.



    Thermex Metal Treating offers the widest range of ferrous metal heat treating processes available in Western Canada. Based out of Edmonton Alberta, Thermex strives to provide the best heat treating solutions.

    Parts can be treated to your exact specifications, or, for tough problems, you can call on our experienced metallurgical engineers to develop the best heat treatment solution for your application. Our Edmonton based in-house metallurgical testing lab (unique among heat treating operations in Western Canada) takes the guesswork out of heat treating process design and quality control.

    Services offered:
    • Carburizing & Carbonitriding
    • QPQ Liquid Nitriding
    • Induction Hardening
    • Gas Nitriding
    • Through Hardening
    • Annealing & Age Hardening
    • Metallurgical Lab

    Website: http://www.thermexmetal.com/
    Phone: +1 (780) 440-4373
    Twitter: @ThermexMetal

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag