16 Years manufacturer EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Slovak Republic

16 Years manufacturer
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Slovak Republic

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    continue to improve, to ensure product quality in line with market and customer standard requirements. Our company has a quality assurance system have been established for 16 Years manufacturer EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Slovak Republic, If you are interested in any of our products and services, please don't hesitate to contact us. We are ready to reply you within 24 hours after receipt of your request and to create mutual un-limited benefits and business in near future.


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • Stress and Strain Diagram for Mild Steel, Aluminium & Different Materials

    Stress and strain diagram is one of the most important topic to study in strength of materials and it is also important to study about it from its base.

    Other Popular and Amazing Videos from Ujjwal Kumar Sen-
    All SFD and BMD Tutorials-

    https://www.youtube.com/watch?v=fJcyB…

    All Probability Tutorials-

    https://www.youtube.com/watch?v=BbTY7…

    Best Video from Ujjwal Kumar Sen-

    Earn Money Online in India- https://www.youtube.com/watch?v=DjKAR…

    About Ujjwal Kumar Sen-

    My Blog- http://www.bloggerhowtoseotips.com
    Mechanical University Blog- http://www.mechanicaluniversity.com/
    Facebook- https://www.facebook.com/ujjwalkumarsen
    Twitter- https://twitter.com/ujjwalkumarsen
    Google Plus- https://plus.google.com/+UjjwalKumarSen



    Recently upgraded my steering components, after chasing some wobble it
    was narrowed down to the drage link and tie rod… I put a Synergy tie rod on, but it persisted, so I decided to upgrade the rest. Here’s the install…

    And this is what TERAFLEX has to say about the kit I chose: SKU: 1853900

    The TeraFlex HD tie rod kit is designed for extreme conditions that
    typically will cause factory steering components to bend and fail. The HD 1.6” O.D. 4140 heat treated chromoly tie rod is over 200% stronger than the factory tie rod. The forged tie rod end housing is designed specifically for JKs and allows proper clearance for use with factory 17” wheels. The tie rod end joint incorporates the same features found in our ball joints, including a 4140 chrome moly Ball/stud and 1045 carbon steel housing. It also features adjustable preload tension to ensure proper long term durability. The joint is pressed into the rod end housing and secured with a snap ring. When oriented in the Tie Rod configuration, the joint offers a total of 14 degrees of movement to minimize tie rod roll, but will still allow maximum turning. The HD drag link is fully forged to eliminate any excess movement during hard
    steering maneuvers and utilizes an oversized DOM factory style
    adjusting collar and pinch clamp for simple adjustments. The HD drag link incorporates the same rod end housing joints as used in the HD tie rod.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key