14 Years Manufacturer C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Supply to India

14 Years Manufacturer
 C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Supply to India

Short Description:

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suita...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for 14 Years Manufacturer C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C Supply to India, Looking to the future, a long way to go, constantly striving to become the all staff with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced products, quality first-class modern enterprise and work hard!


    Steel C45 Round Bar is
    an unalloyed medium carbon steel, which is also a general carbon
    engineering steel. C45 is a medium strength steel with good
    machinability and excellent tensile properties. C45 round steel is
    generally supplied in the black hot rolled or occasionally in the
    normalised condition, with a typical tensile strength range 570 – 700
    Mpa and Brinell hardness range 170 – 210 in either condition. It does
    not however respond satisfactorily to nitriding due to a lack of
    suitable alloying elements.

    C45 round bar steel is equivalent to EN8 or 080M40.
    Steel C45 bar or plate is suitable for the manufacture of parts such as
    gears, bolts, general-purpose axles and shafts, keys and studs.

    1. Supply Range of Steel C45 Round Bar

    • C45 Steel Round Bar: diameter 8mm – 3000mm

    • C45 Steel Plate: thickness 10mm – 1500mm  x width 200mm – 3000mm

    • C45 Steel Flat Bar: 200mm – 1000mm

    • Square C45 Steel: 20mm-800mm

    • Hexagon Steel.

    Surface Finish: Black, Rough Machined, Turned or as per given requirements.

    2. Common C45 Steel Specifications

    Country USA British Japan Australia
    Standard ASTM A29 EN 10083-2 JIS G4051 AS 1442
    Grades 1045 C45/1.1191 S45C 1045

    3. C45 Round Bar Steel Chemical Composition Properties

    Standard Grade C Mn P S Si Ni Cr
    ASTM A29 1045 0.43-0.50 0.60-0.90 0.04 0.050  -  -  -
    EN 10083-2 C45/1.1191 0.42-0.50 0.50-0.90 0.03 0.035 0.04 0.4 0.4
    JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35  -  -

    4. Mechanical Properties of C45 Round Bar Steel Material

    • Mechanical Properties in Quenched+Tempered Condition

    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5 (%) Reduction Z (%)
    <16 <8 min. 490 700-850 min. 14 min. 35
    <17-40 <8<=20 min. 430 650-800 min. 16 min. 40
    <41-100 <20<=60 min. 370 630-780 min. 17 min. 45
    Diameter d (mm) Thickness t (mm) 0.2 % proof stress (N/mm2) Tensile strength (N/mm2) Elongation A5(%)
    <16 <16 min. 390 min. 620 min. 14
    <17-100 <16<=100 min. 305 min. 305 min. 16
    <101-250 <100<250 min. 275 min. 560 min. 16

    5. Forging of Carbon Steel C45 Round Bar

    Hot forming temperature: 850-1200oC.

    Pre
    heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC
    maximum, hold until temperature is uniform throughout the section and
    commence forging immediately. Forging is not workable below 850 oC.
    Finished forgings could be air cooled.

    We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.

    6. DIN C45 Round Bar Steel Grade Heat Treatment

    Forging or hot rolling: 1100 – 850°C
    Normalising:  840 – 880°C/air
    Soft annealing:  680 – 710°C/furnace
    Hardening:  820 – 860°C/water, oil
    Tempering:  550 – 660°C/air

    7. Hardening of DIN C45 Steel Hardening

    Harden from a temperature of 820-860oC followed by water or oil quenching.

    Heat
    to 820 oC – 850 oC hold until temperature is uniform throughout the
    section, soak for 10 – 15 minutes per 25mm of section, and quench in
    water or brine. Or,

    Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.

    Surface hardness for C45 special steel round bar after flame or induction hardning:

    • Steel Name       Steel number          Surface Harndess

    • C45                        1.1191                        min. 55 HRC

    8. Application of DIN Carbon Steel C45 Round Bar

    DIN
    C45 round bar steel material and steel plate C45, flats are widely used
    in all industry for uses which require more strength and wear
    resistance than the low carbon mild steel.

    Quenched and
    subsequently tempered steel for C45 steel grade round bar, steel plate,
    flat and square is used for axles, bolts, forged connecting rods,
    crankshafts, torsion bars, light gears, guide rods, screws, forgings,
    wheel tyres, shafts, sickles, axes, knives, wood working drills,
    hammers, etc.

    Welcome customers to inquiry DIN C45 round bar,
    CK45/1.1191 steel plate, flat steel for C45 steel price. We are
    professional supplier and exporter for more than 20 years. We offer you
    worldwide solution for C45 round bar steel.

  • Previous:
  • Next:



  • Buy AYL Silicone Cooking Gloves – Heat Resistant Oven Mitt for Grilling, BBQ, Kitchen – Safe Handling of Pots and Pans – Cooking amp; Baking Non-Slip Potholders – Internal Protective Cotton Layer: Oven Mitts – ✓ FREE DELIVERY possible on eligible purchases..
    For more details please visit: http://po.st/BKXprU Thank You!

    Great AYL Silicone Cooking Gloves – Heat Resistant Oven Mitt for Grilling, Review
    AYL Silicone Cooking Gloves – Heat Resistant Oven Mitt for Grilling, For Sale
    AYL Silicone Cooking Gloves – Heat Resistant Oven Mitt for Grilling, Unboxing
    Review AYL Silicone Cooking Gloves – Heat Resistant Oven Mitt for Grilling, Product

    https://www.youtube.com/watch?v=MLPMJxE51Ak



    A GEI típusú, kényszerlevegő ellátású gyújtóégő család azonos névleges hőteljesítményű, de különböző beépítési hosszúságú tagokból áll. Az általános felhasználású égőcsalád elsődleges alkalmazási területét az olajfinomítói csőkemencék jelentik.

    A gyújtóégő rendeltetése, alkalmazási területe

    A gyújtóégő különféle főégőkhöz rendelt, folyamatos üzemeltetésre is alkalmas gyújtóégő (őrlángégő funkció), mely a vonatkozó műszaki peremfeltételek között a főégőt

    - üzem indításkor begyújtja,
    - folyamatos üzemével elláthatja az égésbiztosítását.

    Általános alkalmazási területe ipari kazánok, egyéb hőhasznosítók, kemencék, kényszerlevegős vagy injektoros égői, melyek begyújtási feltételei megfelelnek a technológiai utasításoknak és az érvényes biztonságtechnikai előírásoknak egyaránt.
    A tüzelőanyaggal érintkező szerkezeti részek korrózióálló acélból, a gyújtóégő lángjával érintkező szerkezeti részek pedig hőálló acélból vannak kialakítva.

    The pilot burner household of forced air layout kind GEI is consisting of equivalent capacity,
    but of several size users. The principal scope of application of these pilot
    burners is the pipe-stills of oil refineries.

    Goal and field of application of the pilot burner
    The pilot burner is connected to several most important burners, in buy to be certain the functionality
    of ignition burner (pilot burner functionality) delivering beneath the presented technical
    ailments
    - start out-up of the ignition,
    - trying to keep-up as a result of its ongoing operation protected combustion.
    It can be used by industrial boilers, by warmth restoration amenities, furnaces forced-air
    or injector kind burners, by which the ignition ailments are in compliance with the
    legitimate protection specifications. The burner elements owning call with the gas, are
    made of stainless metal, the burner components making contact with the flame are designed of warmth
    resistant metal.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the House