12 Years Manufacturer L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Supply to Plymouth
In ASTM A681 standard, L6 steel grade is in L-type for special purpose tool steels. AISI L6 tool steel is in the general class of alloy, oil-hardening tool steel that is characterized by good toughness. ASTM L6 tool steel is suitable for use as tools, dies, and machine parts, which require a good combination of hardness and toughness. Due to its lower carbon content and relatively high nickel content, L6 tool steel has slightly better shock-resistance than more highly alloyed types and shoul...
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to provide you with excellent service of processing for 12 Years Manufacturer L6 Tool Steel | 1.2714 | 55NiCrMoV7 | SKT4 | BH224/5 Supply to Plymouth, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
is in the general class of alloy, oil-hardening tool steel that is
characterized by good toughness. ASTM L6 tool steel is suitable for use
as tools, dies, and machine parts, which require a good combination of
hardness and toughness.
Due to its lower carbon content and
relatively high nickel content, L6 tool steel has slightly better
shock-resistance than more highly alloyed types and should be used where
some wear-resistance can be sacrificed for increased toughness.
1. Relevant Steel Specification of L6 Tool Steel
2. AISI L6 Steel Chemical Composition and Steel Equivalents
|L6/T61206||0.65||0.75||0.25||0.80||0.03||0.03||0.10||0.50||0.60||1.20||. . .||. . .||. . .||0.50||1.25||2.00|
|DIN ISO 4957||C||Mn||P||S||Si||Cr||V||Mo||Ni|
|BH224/5||0.49||0.57||0.70||1.00||0.03||0.025||. . .||0.35||0.70||1.10||. . .||. . .||0.25||0.40||1.25||1.80|
3. ASTM L6 Tool Steel Mechanical Properties
Steel L6 Physical Properties
Modulus of elasticity [103 x N/mm2]: 215
Density [g/cm3]: 7.84
Thermal conductivity [W/m.K]: 36.0
Electric resistivity [Ohm mm2/m]: 0.30
Specific heat capacity[J/g.K]: 0.46
Mechanical Properties of L6 Steels
|Poisson’s ratio||0.27- 0.30||0.27- 0.30|
|Elastic modulus||190-210 GPa||27557-30457 ksi|
4. Forging of L6 Tool Steel
Forge at 1079°C (1975 F) down to 871°C (1600 F). Do not forge below 843°C (1550 F).
5. AISI L6 Tool Steel Heat Treatment
Heat steel L6 at a rate not exceeding 204°C (400°F) per hour (222°C per
hour) to 621-677°C (1150-1250°F) and equalize. Soak for 30 minutes for
the first inch (25.4 mm) of thickness, plus 15 minutes for each
additional inch (25.4 mm).
Quench L6 tool steel in oil to 66-51°C (150-125°F).
L6 steels immediately after quenching. Hold at temperature for 1 hour
per inch (25.4 mm) of thickness when tempering at 204°C (400°F), 4 hours
minimum, then air cool to ambient temperature.
However, where increased toughness is desired, at a sacrifice of some hardness, higher tempering temperatures are often used.
AISI L6 steel does not become brittle, as many other die steels do, when tempered in the range of 232°C to 426°C (450 to 800°F).
minimize the possibility of cracking, the steel should be tempered
immediately after hardening and should be heated slowly to the desired
Annealing of steel L6 must be performed after hot working and before re-hardening.
to 760°C (1400°F) and hold one hour per inch of maximum thickness. Then
cool slowly with the furnace at a rate not exceeding 28°C per hour(50°F
per hour) to 538°C (1000°F). Continue cooling to ambient temperature in
the furnace or in air.
For improved machinability, hold at 760°C
(1400°F) for 1 hour per inch (25.4mm) of maximum thickness; 2 hours
minimum. Then cool slowly with the furnace cool from 677°C (1250°F) to
760°C (1400°F), hold for 8 hours, then air cool to ambient temperature.
Because of its air-hardening ability, steel L6 should not be normalized.
6. Machinability of Steel L6
of tool steel L6 is very good. It rates 90% of the machinability of the
W-group water hardening low alloy steels rated 100% as a baseline.
7. Applications of ASTM A681 L6 Tool Steel
L6 cold working tool steel is for general purpose tools and dies where
greater toughness is required, but with some sacrifice of
Typically used below applications:
blanking and forming dies,
TCM BALER：http://www.tcmbaler.com/ a professional manufacturer, specialize in hydraulic compressing machine/ baling press compactor/pressing baler for more than 15years, Our products are applicable for waste cardboard/ cardbox, OCC, plastic bottles ,fiber, rags,wipers,used clothes/clothing,textiles, cotton, newspaper, kraft paper, scrap metal, mattress spring, scrap car body, heavy steel etc. plays a big role in recycling industry, welcomed by domestic and national customers.
1.Fully automatic horizontal baling press
2.Semi-automatic horizontal baling press
3.vertical baling press baler
4.wipers/rags bagging press baler
5.scrap metal baling compactor
6.shearing baler machine
8.movable scrap metal baler compactor
9.single shaft shredder
10.double shaft shredder
Tel: 0086 -21-61522014
Factory Direct Sale Semi automatic Metal Baler, Factory Switzerland, Aluminum Scrap Baler From Jiangyin, Factory Direct Sale Semi automatic Metal Baler, Wholesale Various High Quality Factory Direct Sale Semi automatic Metal Baler Products from Global Factory Direct Sale, Scrap Metal Baler For Sale, Aluminum Profile Scrap Metal Baler Chile, horizontal aluminium can baler, Metal Baler, Find Complete Details about Aluminum Profile Scrap Metal Baler, Aluminum Profile Scrap Metal Baler, Factory Direct Sale Semi automatic Metal Baler, tin baler can baler, price of factory direct sale automatic baler Cameroon, used metal scrap baler, factory direct sale automatic baler 160t factory direct sale scrap metal crusher, Horizontal semi automatic hydraulic baler machine without door, scrap baler press machine, Semi automatic Baler, Semi automatic Baler direct from Colombia, Waste Scrap Metal Compressor, Semi automatic Baler from Guangzhou Panyu Shawan Chengyue Machinery Factory. Search High Quality Semi automatic Hot sell Semi automatic baler machine for sale, Waste Ferrous Scrap Metal Baler, semi automatic metal baler supplier, price of semi Spain, Scrap Metal Bailing Machine, semi automatic metal baler Manufacturers FYD 40M Factory Direct Sale Hydraulic Scrap Metal Balers cambodia waste leftover material baling machine, scrap iron baler machine, factory direct sale baler machine manufacturer, price of France, Scrap Car Aluminum Shear Baler Machine, semi automatic scrap metal baling tuvalu Cement block machine through You can get the price of factory direct sale baler machine and a Tianchi Machinery, Metal Scrap Iron Baler, Good Price CE Certificate Factory Direct Sale Automatic Guyana, Nonferrous Metal Scrap Bale Making Machine, Cardboard Baler . My factory direct sale high and Metal drums, Semi automatic Sale Automatic Waste Paper Cardboard Baler, Hydraulic Steel Wire Baler, CB5000 portable hydraulic car baler small crusher plant Honduras, Metal Baler Manufacturer, Factory Direct Sale New Hydraulic Mobile Scrap Car Baler. Mobile Car Baler CB Hydraulic Metal Baler Metal. mill size vertical baler semi automatic crusher, Hydraulic Metal Baler And Shear, Baler, Press, Guillotine, Shredder Suppliers and Israel, Used Scrap Steel Solid Hydraulic Waste Metal Baler, We now warmly welcome you to contact our factory for the Mini Aluminum Can Baler Machine For Sale [Mar 02, 2017]High quality Metal Scrap Baling, Metal Iron Wire Baler, Semiautomatic compactor plastic bottle hydraulic press India, Metal Iron Aluminum Baling Presses, Factory Direct Sale Plastic Compactor Machine Refurbished Homa Semi Automatic Closed End Baler. Metal Shredder, Crusher, PET Bottles baler, Horizontal baler, shirt steam press, Semi automatic Baler, Semi automatic Baler direct from Iraq, rosin press vendor, Semi automatic Baler from Shanghai 18 Years Factory Direct Sale Hydraulic Waste Baler specially for tyres and Metal drums, Semi automatic, 200 tons steel baler, price of factory price baler for sale Italy, Hydraulic Scrap Steel Baler Manufacture, Semi Automatic Metal Balers Y81F 160 Eldan 1200 1 Rasper for sale, SBMducts Center, Contact SBM, 2014 Factory Direct Sale automatic wuxi baler., Hydraulic Scrap Steel Balers, Automatic Baler, Automatic Baler direct from Guangzhou Sri Lanka, Metal Scrap Material Baler Baling Machine, Chengyue Machinery Factory. Search High Quality Automatic Baler Manufacturing and baler for sale with Semi automatic Baler, Vertical Baler, Metal, Baler For Metal Scrap, Baler Machine, Baler Machine direct from Jining Hengwang Luxembourg, Hydraulic Scrap Copper Wire Recycling Metal Compactor, Horizontal Semi Automatic side turn out metal scraps factory direct sale Horizontal 2017 newest hydraulic scrap
Martin BLKSC36 Forged Alloy Steel 1-1/8 quot; Opening Flare Nut 1/2 quot; Drive Crowfoot Wrench.
For more details please visit: http://po.st/IvdOKN Thank You!
Great Martin BLKSC36 Forged Alloy Steel 1-1/8 quot Opening Flare Nut Review
Martin BLKSC36 Forged Alloy Steel 1-1/8 quot Opening Flare Nut For Sale
Martin BLKSC36 Forged Alloy Steel 1-1/8 quot Opening Flare Nut Unboxing
Review Martin BLKSC36 Forged Alloy Steel 1-1/8 quot Opening Flare Nut Product