12 Years manufacturer EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory in Albania

12 Years manufacturer
 EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory in Albania

Short Description:

EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...


  • Length: 3-5.8mm or Customization
  • Surface: black, peeled, or rough turned
  • Heat treatment: air-cooling, normalized, annealed, Q&T
  • Smelting process: EAF+LF+VD
  • Product Detail

    Product Tags

    We always believe that one's character decides products' quality, the details decides products' quality ,with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for 12 Years manufacturer EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel Factory in Albania, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. If you are interested in any of our products, please feel free to contact us for more details.


    EN 34CrNiMo6 Steel
    is an important alloy engineering steel grade as per BS EN
    10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
    hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
    resistance to overheating, but the white sensitivity of 34CrNiM06 is
    high. It also has the temper brittleness, so the weldability of
    34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
    temperature preheating before welding in order to eliminate the stress
    after welding processing.

    1.EN Steel 34CrNiMo6 Supply Range

    Round Steel Bar Sizes: diameter 80mm – 1200mm
    Other steel shape and sizes available according to your requirements.

    Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.

    2.EN 34CrNiMo6 Steel Standards And Equivalents

    BS EN 10083 -3: 2006 34CrNiMo6 / 1.6582 ASTM A29: 2004 4337
    BS EN 10250 – 3: 2000

    3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties

    BS EN 10083 – 3:2006 34CrNiMo6
    /1.6582
    C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.025 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    BS EN 10250-3:2000 C Mn Si P S Cr Mo Ni
    0.30-0.38 0.5-0.8 0.40 max 0.035 max 0.035 max 1.3-1.7 0.15-0.30 1.3-1.7
    ASTM A29: 2004 4337 C Mn Si P S Cr Mo Ni
    0.30-0.40 0.6-0.8 0.20-0.35 0.035 max 0.040 max 0.70-0.90 0.20-0.30 1.65-2.00

    4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel

    Properties < 16 >16 – 40 >40 – 100 >100 – 160 >160 – 250
    Thickness t [mm] < 8 8<t<20 20<t<60 60<t<100 100<t<160
    Yield strength Re [N/mm²] min. 1000 min. 900 min. 800 min. 700 min. 600
    Tensile strength Rm [N/mm2] 1200 – 1400 1100 – 1300 1000 – 1200 900 – 1100 800 – 950
    Elongation A [%] min. 9 min. 10 min. 11 min. 12 min. 13
    Reduction of area Z [%] min. 40 min. 45 min. 50 min. 55 min. 55
    Toughness CVN [J] min. 35 min. 45 min. 45 min. 45 min. 45

    5.Heat Treatment of 34CrNiMo6 Engineering Steel

    Quenched and Tempered (Q+T) of 34CrNiMo6 Steel

    • Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;

    • Soak at this hardening temperature quench in oil;

    • Temper as soon as 34CrNiMo6 steels reach room temperature.

    • Heat uniformly to the suitable temperature;

    • Withdraw from the furnace and cool in the air.

    • The usual tempering temperature is 600°C which depending on the actual requirements.

    6.Forging of DIN 34CrNiMo6 / 1.6582 Steel

    Hot forming temperature: 1100-900oC.

    7.Machinability of Steel 34CrNiMo6

    Machining
    is best done with this 1.6582 alloy steel in the annealed or normalized
    and tempered condition. It can be machined by all conventional methods.

    8.Welding

    The
    alloy materials can be fusion or resistance welded. Preheat and post
    heat weld procedures should be followed when welding this alloy by
    established methods.

    9.Application

    EN DIN
    34CrNiMo6 steel is used to make tools which demands good plasticity and
    high strength. It is usually selected to make the big size and important
    parts, such as heavy machinery axle,turbine shaft blade, high load of
    transmission parts, fasteners, crank shafts, gears, as well as heavily
    loaded parts for motor construction etc.

    Otai Steel is reliable to
    supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
    Please tell us your detailed requirements and have the best offer soon.

  • Previous:
  • Next:



  • Anyang Forging Press (Group) Machinery Industry Co., Ltd is the biggest and best manufacturer of forging equipments and forging auxiliary machinery in China, also we are specialized in manufacturering hydraulic briquette press / baling press to process metal scrap and Hydraulic Riveting Machine for truck/bus chassis riveting field.

    Jack Xue(Mr.)
    Anyang Forging Press Machinery Industry Co.,Ltd.
    Tel: 0086-372-5986768 0086-372-5931234
    Fax: 0086-372-5922446
    Website: http://www.chinesehammers.com
    E-mail: jack@chinesehammers.com

    My factory is a professional forging equipment supplier, an ISO9001 certificated company, with a history of more than 50 years of experience in producing forging equipments, forging equipments exported to more than 48 countries and region, we can offer following forging equipments:

    1) Pneumatic Forging Hammers falling weight at 150kg, 250kg, 400kg, 560kg, 750kg, 1000kg and 2000kg

    2) Electro-Hydraulic Open Die Forging Hammers capacity at 1T, 2T, 3T, 4T, 5T, 6 T, 7T, 8T, 10T.

    3) Electro-Hydraulic Closed Die Forging Hammers capacity at 1T, 2T, 3T, 5T, 8T, 10T, 16T.

    4) PLC Full hydraulic die forging hammers hitting energy at 16kj, 25kj, 31.5kj, 40kj, 50kj, 63kj, 80kj, 100kj.

    5) Open Die Hot Forging Press at 800T, 1250T, 1600T, 2000T, 2500T, 3150T, 4000T, 5000T.

    6) Forging Manipulators capacity at 1T, 2T, 3T, 4T, 5T, 6T, 8T to cooperate with open die forging hammers and forging presses.

    7) Ring Rolling Machine from OD at 160mm to 5000mm.
    We wish we can cooperate with your factory
    If you want to know more about our products, please not hesitate to contact with me.

    Pneumatic Forging Hammers
    Electro-Hydraulic Open Die Forging Hammers
    Electro-Hydraulic Closed Die Forging Hammers
    PLC Full hydraulic die forging hammers
    Open Die Hot Forging Press
    Forging Manipulators
    Ring Rolling Machine



    I try to bridge the gap between in-depth theoretical explanations of heat treatment, and rote tradition.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck