12 Years Factory wholesale EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Chile
EN 34CrNiMo6 Steel is an important alloy engineering steel grade as per BS EN10083-3:2006. 34CrNim06 steel has high strength, high toughness and good hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability ofresistance to overheating, but the white sensitivity of 34CrNiM06 ishigh. It also has the temper brittleness, so the weldability of34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the hightemperature preheating before welding in order to eliminate the stressafter welding pr...
owing to good service, a variety of high quality products, competitive prices and efficient delivery, we enjoy a good reputation among our customers. We are an energetic company with wide market for 12 Years Factory wholesale
EN DIN 34CrNiMo6 | 1.6582 | 4337 Engineering Steel in Chile, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
is an important alloy engineering steel grade as per BS EN
10083-3:2006. 34CrNim06 steel has high strength, high toughness and good
hardenability. EN / DIN 34CrNiMo6 alloy steel has the stability of
resistance to overheating, but the white sensitivity of 34CrNiM06 is
high. It also has the temper brittleness, so the weldability of
34CrNiMo6 material is poor. The steel 34CrNiMo6 needs the high
temperature preheating before welding in order to eliminate the stress
after welding processing.
1.EN Steel 34CrNiMo6 Supply Range
Round Steel Bar Sizes: diameter 80mm – 1200mm
Other steel shape and sizes available according to your requirements.
Surface finish: Black, machined, peeled, turned or according to other customers’ pecial requirements.
2.EN 34CrNiMo6 Steel Standards And Equivalents
|BS EN 10083 -3: 2006||34CrNiMo6 / 1.6582||: 2004||4337|
|BS EN 10250 – 3: 2000|
3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties
|BS EN 10083 – 3:2006||34CrNiMo6
|0.30-0.38||0.5-0.8||0.40 max||0.025 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|BS EN 10250-3:2000||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.38||0.5-0.8||0.40 max||0.035 max||0.035 max||1.3-1.7||0.15-0.30||1.3-1.7|
|ASTM A29: 2004||4337||C||Mn||Si||P||S||Cr||Mo||Ni|
|0.30-0.40||0.6-0.8||0.20-0.35||0.035 max||0.040 max||0.70-0.90||0.20-0.30||1.65-2.00|
4.Mechanical Properties of EN/DIN 34CrNiM06 / 1.6582 Alloy Steel
|Properties||< 16||>16 – 40||>40 – 100||>100 – 160||>160 – 250|
|Thickness t [mm]||< 8||8<t<20||20<t<60||60<t<100||100<t<160|
|Yield strength Re [N/mm²]||min. 1000||min. 900||min. 800||min. 700||min. 600|
|Tensile strength Rm [N/mm2]||1200 – 1400||1100 – 1300||1000 – 1200||900 – 1100||800 – 950|
|Elongation A [%]||min. 9||min. 10||min. 11||min. 12||min. 13|
|Reduction of area Z [%]||min. 40||min. 45||min. 50||min. 55||min. 55|
|Toughness CVN [J]||min. 35||min. 45||min. 45||min. 45||min. 45|
5.Heat Treatment of 34CrNiMo6 Engineering Steel
Quenched and Tempered (Q+T) of 34CrNiMo6 Steel
Heat 34CrNiMo6 round steel slowly to the temperature of 850°C;
Soak at this hardening temperature quench in oil;
Temper as soon as 34CrNiMo6 steels reach room temperature.
Heat uniformly to the suitable temperature;
Withdraw from the furnace and cool in the air.
The usual tempering temperature is 600°C which depending on the actual requirements.
6.Forging of DIN 34CrNiMo6 / 1.6582 Steel
Hot forming temperature: 1100-900oC.
7.Machinability of Steel 34CrNiMo6
is best done with this 1.6582 alloy steel in the annealed or normalized
and tempered condition. It can be machined by all conventional methods.
alloy materials can be fusion or resistance welded. Preheat and post
heat weld procedures should be followed when welding this alloy by
34CrNiMo6 steel is used to make tools which demands good plasticity and
high strength. It is usually selected to make the big size and important
parts, such as heavy machinery axle,turbine shaft blade, high load of
transmission parts, fasteners, crank shafts, gears, as well as heavily
loaded parts for motor construction etc.
Otai Steel is reliable to
supply engineering 34CrNiMo6 steels / 1.6582 engineering alloy steels.
Please tell us your detailed requirements and have the best offer soon.
Vishal Steel (India) http://www.vishalsteel.net/ is the most acclaimed manufacturer, exporter, distributor and supplier of –
All Size Rod & Bar
Stainless Steel Bar
Cold Drawn Stainless Steel Round Bar
Hot Rolled Stainless Steel Bar
440 Series Stainless Steel Round Bar
Stainless Steel Cold Drawn Hexagon Bar
Stainless Steel Hot Rolled Hexagon Bar
Stainless Steel Cold Drawn Square Bar
Stainless steel flat bar
Stainless Steel Hot Rolled Flat Bar
Stainless Steel Drawn Flat Bar
UNS S32750 /1.4410 /2507 Bar
UNS S32305/S31803/2205 Bar
Stainless steel shipbuilding rods
DIN 1.2083/AISI 420/S136/GB 4Cr13 Stainless Steel Round Bar
Hot Rolled / Cold Rolled 201/301/304/316/410/430 Stainless Steel Round Bar
Corrosion Resistance DIN 1.2316/AISI 420/S136/GB3Cr17NiMnMo Stainless Steel Round Bar
Hot Rolled Or Forged DIN 1.2316 / AISI 420 / S136 / GB3Cr17NiMnMo Stainless Steel Round Bar
Wear ResistanceDIN 1.2316/AISI 420/S136/GB3Cr17NiMnMo Stainless Steel Round Bar
Mirror Polishing Stainless Steel Round Bar AISI 420
Forged Stainless Steel Round Bar DIN 1.2316 , Corrosion Resistance
Hot Rolled Stainless Steel Round Bar DIN 1.2316 / AISI 420
DIN 1.2083 Stainless Steel Round Bar Precision Mirror Polishing
Stainless Steel Wires DIN 1.2316 , Stainless Steel Round Bar
Hot Rolled Stainless Steel Round Bar DIN 1.2083 / S136 , Easy Welding
High Corrosion Resistance Stainless Steel Round Bar , DIN 1.2083
S136 / DIN1.2083 Stainless Steel Round Bar For PVC Mould
Alloy Steel Bar
High Tenacity Alloy Steel Round Bar AISI 4135 With Good Hardenability
AISI 4140 / JIS SCM440 / DIN 1.7225 Alloy Steel Round Bar with Milled Surface
Forged Black Alloy Steel Round Bar of Harden GB 20Cr AISI 8620
Hot Rolled Alloy Steel Round Bar , AISI 5140 Harden High Tenacity
Hot Rolled Forged Alloy Steel Round Bar AISI 4140 / DIN1.7225
Forged AISI 5140 / ASTM 5140 Alloy Steel Round Bar for Connecting Rod
C45B forged alloy steel round bar
Alloy forged steel round bar
39NICRMO3 forged alloy steel round bar
S45C forged alloy steel round bar
34CRNIMO6 forged alloy steel round bar
42CRMO4 forged alloy steel round bar
Nickel Alloy Bar
Monel 400 nickel alloy cold drawn bright steel bar
Hastelloy alloy C276 (UNS N01276) Bars and Rods
Inconel 625 Round Bar
Inconel Round Bar
Inconel 625 Rod
Inconel 600 Bar
Inconel 600 Rod
ASME SB-164 Monel Bar (400)
Monel 400 Bar
Hastelloy C22 Bar
Inconel 718 Bar /Rod
Inconel 625 Bar /Rod
Inconel 601 Bar /Rod
Inconel 600 Bar /Rod
Two 1/2″ OD carbon steel bars (7″ heated length) heated to 2100F in 19 seconds using Ajax TOCCO’s air cooled 35kW TOCCOtron AC power source. The 3:1 conductance window allows for 100% power delivery throughout the entire heat cycle from room temperature to well above currie (where carbon steel looses its magnetism. This system is very compact, portable, and versatile. Only the heating inductor and water cooled cables require water, which is supplied by a closed loop water cooler. This system can be quickly installed installed adjacent to most presses, hot headers and/or thread rolling machines.